Total 2,424 Junior Executive infrastructure engineer job vacancies in The United States of America

• Analysis and improvement of production improvement in the production department;
• Improve the production process and product performance, and formulate corresponding work instructions; Departmental lean production organization to promote work
• PCB board design review, process plan confirmation, development and verification
  Cause analysis, treatment and prevention of defective products such as internal and external inspections and customer complaints;
• Familiar with the process development process of electronic products, with innovation ability, communication ability, planning ability, analysis and judgment ability, improvement ability
• Familiar with relevant office software, and have a preliminary grasp of the use of PRO-E drawing software
• Familiar with production process control methods and quality analysis and control tools; proficient in process improvement tools;
• Familiar with SMT, plug-in, wave soldering, testing and other production processes, and know the process control points
• Familiar with the improvement and improvement of electronic product technology, tooling and fixtures, quick thinking, strong ability to analyze and deal with production process problems
• Have a strong ability to analyze and deal with production technical problems, be able to work independently, formulate standard operating specifications SOP, train and guide production line employees
• College degree or above, major in electronics, electrical, and communication, with more than one year of relevant experience
• Understand the management standards of process work series, program documents, and product quality, safety and environmental protection standards
• Able to work independently, write PFMEA, SOP, train and guide production line staff
• Possess strong communication, coordination and execution skills, a high degree of professionalism, a positive and optimistic work attitude, good at interacting with people of various personalities.
• Fresh graduated are welcome.

Perks & Benefits

• Open culture, company weekly sport days, teambuilding events, company events organization 
• Internal & External training for career path growth 
• Free employees parking with security

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Requirements : 

• Bachelor's degree in engineering or related field.
• Valid engineering license - CIDB or NIOSH.
• 2 years field and project planning experience.
• Proficiency in design and visualization software and excellent computer literacy.
• Ability to work with multiple discipline projects.
• Strong project management and leadership skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practises.
• Must posses own transport and be willing to travel. 

Job Responsibilities : 

• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Assign responsibilities and formulate project paramaters to the project team.
• Interact with clients to interpret their needs and requirements and represent them in the field .
• Perform quality control tasks and report on project status.
• Cooperate and communicate with project participants to maintain profitability and efficiency.
• Develope equipment specifications.
• Ensure compliance with applicable codes, practises, policies, standards, and specifications.
• Generate Gantt Chart, S-Curve, and Project Pipeline Schedule.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel, sports, transportation, etc.)
• Company trips
• Medical insurance
• Personal development opportunities

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management. 
• Determines project responsibilities by identifying project phases and elements; 
  assigning personnel to phases and elements; reviewing bids from contractors. 
• Determines project specifications by studying product design, customer 
  requirements, and performance standards; completing technical studies; preparing cost estimates. 
• Confirms product performance by designing and conducting tests. 
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements. 
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems. 
• Controls project plan by reviewing design, specifications, and plan and schedule 
  changes; recommending actions. 
• Controls project costs by approving expenditures; administering contractor contracts. 
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions. 
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations. 
• Maintains project data base by writing computer programs; entering and backing up data. 
• Maintains product and company reputation by complying with federal and state 
  regulations. 
• Contributes to team effort by accomplishing related results as needed.

JOB REQUIREMENT 

• Requirements Analysis
• Design Skills
• Project Management
• Manufacturing Methods and Procedures
• Process Improvement
• Technical Understanding
• Documentation Skills
• Safety Management
• Supervision,
• Knowledge of CAD, CAD/CAM Circuit Design

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.

Responsibilities: 

• Able to work beyond normal working hours when necessary.
• Implement effective maintenance procedures to minimize production down time caused by breakdown of machineries. 
• Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions. 
• Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance. 
• Implement effective preventive maintenance plan to ensure all facilities and equipment operate efficiently and effectively. 
• Initiate necessary modification and improvement to enhance machine efficiency. 
• Conduct studies and carry out analysis to ensure capacity of mechanical installations meet the needs of production. 
• Initiate immediate actions to recommend for improvement and upgrading when and where necessary. 
• Ensure all work requests are sufficiently and promptly fulfilled. 
• Assist in developing system and procedures to continuously enhance energy efficiency. 
• Conduct constant review on spare parts consumption and initiate necessary purchase of spare parts. 
• Analyse spare parts consumption and maintenance cost and initiate effective actions to reduce consumption and maintenance cost. 
• Monitor to ensure operation of utility supply and facilities comply with provision of relevant laws, by-laws, rules and regulations. 
• Plan constantly for proper upkeep and maintenance of building facilities. 
• Ensure continuous development and upgrading of subordinates’ skills. 
• Involve actively in cost savings or improvement projects. 
• To advise and guide maintenance supervisor in the implementation of effective 
  maintenance programs. 
• Provide proper guidance to subordinates to troubleshoot and overcome machine problems speedily and effectively. 
• To prepare monthly reports, capital expenditures and evaluate service providers.

Qualifications: 

• Minimum 3 years of relevant work experience in same field mechanical, electrical or industrial maintenance 
• Strong understanding of engineering principles and knowledge of equipment and machinery 
• Ability to analyse information, diagnose problems and develop solutions 
• Excellent communication and interpersonal skills 
• Strong time management and organisational skills 
• Ability to prioritise tasks and make decisions under pressure 
• Language required : English,Bahasa Malaysia, chinese 
• Minimum education level : certification level 

ROLE AND RESPONSIBILITIES

• Technically advise suitable products, service or equipment for Client. 
• Secure and Renew Orders and Coordinate for the delivery. 
• Meeting with Clients onsite to propose irrigation solution for the site. 
• To Coordinate with Marketing team to produce the necessary sales kits (i.e. technical presentation, sales brochure, advertisement and etc.) 
• Assists with research and development of new product and services 
• Prepare detail bill of material and quotation for all enquiry, including surveying with drone & producing contour map for potential customer. 
• Provide preliminary design conceptual drawing for presentation and quotation. 
• In charge for the operation of e-commerce 
• In charge for providing tutorial or training program for Client (i.e. Landscape Architect, M&E Consultant,Developers and etc.) 

JOB REQUIREMENTS 

• Minimum SPM/ Professional Certificate/ Diploma/ Degree or equivalent in related field. 
• At least 3 year(s) of working experience in related field is required for this position.
• Ability to converse fluently in Mandarin & English
• Excellent in Microsoft Office (Excel, Word, Power Point) 
• Excellent in AutoCAD 2D 

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

This position can apply to Automation & Granulation & Extrusion & Plastic Injection & Assembly Workshop.

该职位开放给自动化、造粒车间、挤出车间、注塑车间、装配车间的申请。

Responsibilities

• Arrange reasonable manufacturing planning according to production orders and complete manufacturing tasks on time.
• Coordinate with other engineers, suppliers, and assembly teams to ensure machines meet OEE targets.
• Establish technical manuals, drawings, models, training documentation, preventative maintenance plans, and troubleshooting guides for newly established automated equipment/processes.
• Work with automation suppliers for design reviews, research, installation, and troubleshooting of parts.
• Examine the manufacturing management in the workshop and the implementation of the manufacturing technical documents.
• Responsible for coordinating new product pilot manufacturing.
• Responsible for the maintenance of mold and fixtures in the area of responsibility
• Participate in the trial production, testing, and review of new products, materials, and molds.
• Ensure records are adequately maintained, updated, and traceable per ISO 13485 requirements.
   

Requirements

• Prefer Mechanical Engineering/ Polymer Engineering or another related field.
• Ability to work independently and under pressure, good team spirit, strong interpersonal skills, adaptability, and good communication and presentation skills.
• Candidates fluent in Mandarin are preferred as the role requires the candidate to deal with Mandarin-speaking colleague
• Fresh Graduates are encouraged to apply!
   

Perks & Benefits

• On-the-job training will be provided
• Medical Benefits
• Incentive Allowance
• Seniority Reward
• Year-end salary adjustment
• Year-End Bonus
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Company trips
• Personal leave
• Open culture
• Personal development opportunities

ROLE AND RESPONSIBILITIES

• Technically advise suitable products, service or equipment for Client. 
• Secure and Renew Orders and Coordinate for the delivery. 
• Meeting with Clients onsite to propose irrigation solution for the site. 
• To Coordinate with Marketing team to produce the necessary sales kits (i.e. technical presentation, sales brochure, advertisement and etc.) 
• Assists with research and development of new product and services 
• Prepare detail bill of material and quotation for all enquiry, including surveying with drone & producing contour map for potential customer. 
• Provide preliminary design conceptual drawing for presentation and quotation. 
• In charge for the operation of e-commerce 
• In charge for providing tutorial or training program for Client (i.e. Landscape Architect, M&E Consultant,Developers and etc.) 

JOB REQUIREMENTS 

• Minimum SPM/ Professional Certificate/ Diploma/ Degree or equivalent in related field. 
• At least 3 year(s) of working experience in related field is required for this position.
• Ability to converse fluently in Mandarin & English
• Excellent in Microsoft Office (Excel, Word, Power Point) 
• Excellent in AutoCAD 2D 

Responsibilities:

• Execute full software development life cycle (SDLC).
• Create flowcharts, layouts and documentation to identify requirements and solutions.
• Write well-designed, testable code.
• Produce specifications and determine operational feasibility.
• Integrate software components into a fully functional software system.
• Develop software verification plans and quality assurance procedures.
• Document and maintain software functionality.
• Troubleshoot, debug and upgrade existing systems.
• Deploy programs and evaluate user feedback.
• Comply with project plans and industry standards.
• Ensure software is updated with latest features.

Requirements:

@ Education:

A bachelor’s degree in computer science, information technology, or a related field is usually expected.

@ Programming Skills:

No specific programming skill required.

@ Analytical Abilities:

Analytical thinking and problem-solving skills are essential.

Attention to detail and a commitment to quality assurance.

@ Communication and Teamwork:

Good communication skills to collaborate effectively with teams.

Liaising with development and project teams to make recommendations.

@ Experience:

Gain practical experience through internships, entry-level roles, or volunteer positions in programming.

Fresh graduates are welcomed to apply, training will be provided

Perks & Benefits

• bonus
• Nearby public transport
• Flexible working hours
• Casual dress code
• Company trips
• Personal leave
• Open culture
• Personal development opportunities

Job Description

• Prepare project design documents, drawings & budgetary proposals.
• Work in a team to produce coordinated acoustic design with all necessary mechanical, electrical and spatial designs. 
• Project co-ordination and management.
• Attend project meetings.
• Perform site inspections and project commissioning. 
• Overseas Travel for meeting attendance and/or project site visit

Requirements: 

• Possesses at least a Bachelor’s Degree in Engineering. Specialization in Acoustics, Noise & Vibration, Mechanical or Building Services is preferrable.
• At least 2 years experience in Architectural Acoustic, Mechanical Design or Building Services is preferrable. 
• Project  management and site experience with exposure in SE Asia projects is preferrable.
• Knowledge and proficiency in using MS Project, AutoCad, Autodesk will be an advantage.
• Fluency in English Language both spoken and written. 
• Willingness to travel in South East Asia and Asia Pacific regions as and when required.
• Strong initiative, customer-oriented, strong communication and interpersonal skills, able to meet tight schedule.
• Good writing skill and capable to produce professional design/ tender documents.
  Hard working and willing to learn.
• 5 days work.
• Candidates with working experience are encouraged to apply. 

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Central location
• Flexible working hours
• Casual & Smart dress code
• Medical insurance
• Personal leave

Able to work in site at Rawang, Selangor 

Preferably someone with high rise building expereince

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Manage compliance with standards and specifications for quality control and assurance.
• Identify and solve issues that arise at project sites.
• Oversee budgetary, scheduling, and project databases, and report regularly to project manager on progress.
• Review project proposals and plans to develop project objectives.
• Developing specifications for the project's needed equipment.
• Collect and analyze project information to create status reports and recommend future actions.
• Responsible for the preparation of Progress Claim, Variation Order, Final Account promptly and accurately. 
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Monitor project progress, conduct inspections at site and provide regular project status reports to Management. 
• To assist Project Manager in general operation required in order to run the project smoothly.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code

Software Engineer responsible for managing back-end services and the interchange of data between the server and the users. Primary focus will be the development of all server-side logic, definition and maintenance of the central database, and ensuring high performance and responsiveness to requests from the front-end.

Responsibilities:
- Design and develop web-based applications according to technical and functional specifications.
- Provide troubleshooting and solution for existing web-based applications.
- Will be involved in R&D, plan, design, develop and implement web-based applications.
- Contribute in all phases of the development lifecycle.
- Build efficient, testable, and reusable PHP modules.
- Responsible in improving web application performance, security and reliability.
- Maintain and improve code quality, organization, and code security.
- Build the front-end applications with user-friendly UI.
- Technical risk assessment and estimation.

Perks & Benefits

• Employee equity
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Regular team activities
• Personal development opportunities

Job Duties / Requirements:

• Full Time 3 position available.
• Candidate must posses at least Professional Certificates, Diploma graduates in Automotive/Mechanical Engineering or equivalent.
• At least 3 years work experience in the related field.  However, fresh graduate also encourage to apply.
• Proficient in CAD drawing, knowledge in computer software and hardware equipment, and familiar with various measuring tools and equipment.
• Ability to planning, communication, coordination, analytical, judgment, organization as well as implementing in various tasks.
• Communication skills : Chinese and English
• Participate in feasibility assessment of new product development.
• Prepare APQP materials and guide the output of relevant unit data in a timely manner.
• Convene new product development meetings as planned, report the meeting contents and the resolutions, and organize meeting minutes,
• Record and send to relevant units, track the results and ensure implementation as planned.
• Responsible for real-time control of supplier's parts/mold progress and problem points.
• Make test samples, issue test orders and track test progress and results.
• Purchase and manage the materials required for new product samples, conduct trial production analysis of the materials, propose problem-solving countermeasures, and follow up on implementation.
• Track the progress of new product molding, inspection, new fixture production, modification, etc. and confirm compliance.
• Follow up on the OEM's trial assembly progress and problem points, propose solutions and provide feedback and track the results of problem-solving.
• Submit PPAP related information, samples, etc., and perform preparations before mass production.
• Prepare weekly and monthly reports and operating report materials.
• Prepare product budget and control budget execution.
• Responsible for on-site trial production of each changed part and submission of problem points.
• Complete other tasks may assigned by superior leaders from time to time.

Only shortlisted candidate will be notified.

Interested candidate are invited to apply online or email your detailed resume, expected salary directly to hr@gskm.com.my

Perks & Benefits

• 5 Working Days Hours (8:00am ~ 6:00pm)
• Company Uniform provided
• Travelling/Transport Allowance
• Meal/Attendance/Incentive Awards
• Bonus
• Company Trip / Team Building Activity