Total 203 Full-time devops engineer job vacancies in Malaysia

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Responsible on execution and analysis of NAND memory reliability qual and perform Failure Analysis.
• Designing and developing reliability sequences for given technology node in addition to performing actual reliability test execution followed by Failure Analysis to root cause the issues reported.
• Some of the other areas that this position will include will be: R&D support, DPPM improvement, test documentation, comprehension of design manuals and data sheets, using various bench equipment (oscilloscopes, logic analyzers, multimeter), and interacting with other engineering groups.

Role Overview

This role is not about running tests. It is about understanding what the data means, why it behaves that way, and how to measure it better. You will work at the intersection of physics, electronics, and software, developing measurement solutions and extracting insight from complex data to support MEMS sensor development and production. This role is for you if you are comfortable writing code, interpreting data, and critically questioning measurement results.

Key Responsibilities

Characterization & Data Analysis

• Analyze large, datasets from MEMS characterisation and production
• Identify correlations, drifts, and non-obvious effects across multiple parameters
• Separate real physical effects from measurement artefacts
• Develop automated analysis workflows (Python / C# / similar)

Measurement Technology Development

• Design, build, and improve lab measurement setups (electrical, thermal, mechanical domains)
• Define measurement strategies for new product concepts and production methods
• Debug and extend internally developed measurement software (C++ / C#)
• Improve measurement robustness, repeatability, and throughput

Root Cause & Physical Understanding

• Drive root-cause analysis using data, experiments, and physical reasoning
• Work closely with product and process engineers to explain observed behavior
• Challenge unclear or inconsistent results

Method Validation & Lab Enablement

• Validate new test methods before production introduction
• Define limitations, accuracy, and uncertainty of measurement methods
• Document and standardize solutions for cross-site usage

Collaboration

• Work across disciplines: device physics, electronics, software, and production
• Collaborate with international teams and contribute to global MT alignment

We are seeking an experienced and proactive Senior Cyber Security Engineer to join our Global Cyber Security Operations team. This role requires an experienced security professional responsible for executing and supporting cybersecurity operations globally but with a focus on our manufacturing facility. This role has a primary focus on global insider risk management and data loss prevention (DLP), while also providing hands‑on operational support for local manufacturing risks. You will work closely with our Security Operations Center (SOC), incident response teams, and other IT stakeholders to stay ahead of emerging threats and ensure we’re able to build great products securely.

ESSENTIAL DUTIES AND RESPONSIBILITIES: 

Insider Risk Management & Data Protection

• Assist in the management and configuration of Sandisk governance controls related to data security
• Execute day‑to‑day operations of insider risk management and data security controls using Microsoft Purview, MIP, IRM, and DLP technologies.
• Monitor, triage, and investigate insider risk alerts and data loss events using Microsoft Purview, Microsoft Defender, and SIEM tooling, following defined procedures and escalation paths.
• Conduct detailed analysis and documentation of insider risk and data protection incidents, including evidence handling and recommended follow‑up actions.
• Support tuning and refinement of DLP and insider risk policies to improve signal quality and reduce false positives, in coordination with platform owners and senior analysts.

Endpoint Detection, Response & Manufacturing Security

• Perform hands‑on monitoring, investigation, and response activities using Microsoft Defender for Endpoint and CrowdStrike Falcon in an enterprise environment.
• Investigate endpoint‑based alerts affecting manufacturing office systems, engineering workstations, and privileged users, correlating activity across EDR, identity, and data signals.
• Support incident response efforts impacting the manufacturing site, including containment actions, evidence collection, and post‑incident documentation.
• Maintain awareness of manufacturing‑specific risks, including engineering workflows, shared systems, and IP‑sensitive environments.

Automation, Scripting & Analysis

• Use scripting and basic programming to support investigations, data analysis, and operational efficiency.
• Develop and maintain simple scripts or queries (e.g., PowerShell, Python, KQL) to assist with alert triage, log analysis, data validation, and reporting.
• Leverage scripting to reduce repetitive manual tasks while operating within established security tooling and change controls.

Work Style & Attributes

• Self‑motivated and dependable, with a strong work ethic in an on‑site, semi‑isolated environment.
• Comfortable operating as an individual contributor with defined scope and responsibilities.
• Collaborative and approachable, with a service‑oriented mindset toward local manufacturing and IT teams.
• Detail‑oriented and risk‑aware, with an appreciation for balancing security controls against manufacturing uptime and business impact.
• Strong analytical and critical-thinking skills with high attention to detail.
• Clear and concise written and verbal communication, including to non-technical stakeholders.
• Ability to remain composed and effective under pressure during active security incidents.
• Team-oriented and collaborative with a proactive, security-first mindset.
• Ability to approach security challenges with genuine curiosity and a questioning attitude, consistently digging deeper to understand the "why" behind alerts, behaviors, and anomalies rather than accepting surface-level conclusions.

Role Overview

The Technical Analyst engineer is the engine room of the Client Experience department, reporting directly to the AI Lead. You will bridge the gap between technical infrastructure and business intelligence by building and maintaining the department’s automation stack—using Zendesk and Python—while applying AI/LLM knowledge to enhance support capabilities. You will also serve as the team’s data anchor, performing deep-dive financial reconciliations and building automated dashboards to drive data-led decision-making.

Key Responsibilities

1. Automation & AI Integration
• Zendesk & SaaS Optimization: Architect and maintain Zendesk triggers, automations, and complex workflows;
• Python-Led Automation: Develop and deploy Python scripts to automate repetitive manual tasks.
• AI Feature Deployment: Implement and tune advanced AI features within SaaS, managing knowledge base training and basic RAG (Retrieval-Augmented Generation) logic.
2. Data Tools & Reporting
• Advanced Data Analysis: Use tools extensively for high-stakes data cleaning, financial reconciliation, and analysis (advanced formulas and Power Query required).
• BI Dashboarding: Build and maintain automated reports to track KPIs and operational health.
• Management Reporting: Prepare regular operations and analysis reports, translating raw data into insights for Finance and Management teams.
3. Process Improvement & Collaboration
• Workflow Refinement: Support the optimization of processes, rules, and SOPs to improve efficiency, transparency, and internal control.
• Cross-functional Alignment: Work closely with Payment, Finance, IT, and Product teams to drive system improvements and handle security-related whitelisting or response tasks.

• Platform Expertise: Hands-on experience with Zendesk Administration (workflows, triggers, and app integrations).

• Advanced Data Skills: Expert-level Excel (Power Query, Pivot Tables, and complex financial reconciliation); experience with SQL and BI tools.
• Automation & Scripting (Preferrable): Proficiency in Python for business process automation and data extraction; experience with APIs and Webhooks.
• AI Literacy (Preferrable): A foundational understanding of LLMs and how to apply them within a customer experience or operational framework.

The Senior Grid Planning & Strategy Engineer is the strategic architect responsible for aligning our BESS pipeline with Malaysia’s National Energy Transition Roadmap (NETR). You will translate high-level energy policy into physical infrastructure investment strategies, identifying exactly where the grid requires BESS to maintain stability. By analysing long-term demand and RE integration challenges, you will position the company as a Strategic Advisor to the TNB Grid System Operator (GSO) and Suruhanjaya Tenaga (ST).

Key Responsibilities

• Policy-to-Infrastructure Translation: Analyse the NETR and Integrated Resource Planning (IRP) targets to identify the physical transmission upgrades and BESS capacities required to meet 700MW+ RE integration goals.
• Macro-Grid Stability & Planning: Perform regional load-flow and contingency ($N-1$) analyses using PSS/E or DIgSILENT. Identify "Weak Grid" nodes where BESS can provide synthetic inertia and voltage support to prevent curtailment of solar assets.
• Strategic Advisory (GSO/ST Liaison): Act as the lead technical diplomat with TNB GSO and ST. Provide evidence-based recommendations on grid-level BESS dispatching and infrastructure design to influence future Grid Code updates and tender structures.
• BESS Dispatch & Revenue Optimization: Model grid-level BESS dispatch scenarios (e.g., peak shaving, frequency regulation, and spinning reserve). Advise the commercial team on how the National Load Despatch Centre (NLDC) will utilize assets under the CRESS framework.
• Investment Roadmap Development: Design 5-to-10-year infrastructure investment plans. Identify optimal Point of Interconnection (POI) locations in the 132kV/275kV network where the grid is "thirsty" for BESS, ensuring long-term project bankability.

• Bachelor’s or Master’s Degree in Electrical Engineering (Power Systems) or Energy Policy & Planning.
• 8 years in Power System Planning, Transmission Engineering, or Grid Operations.
• Registered Professional Engineer (Ir.) or Graduate Engineer with the Board of Engineers Malaysia (BEM).

The Senior Grid System Design Engineer is the technical "Gatekeeper" for our BESS pipeline. This role carries dual responsibility: performing the advanced mathematical simulations required for TNB approval and acting as the primary technical auditor for BESS and PPC hardware suppliers.

Key Responsibilities

• BESS Dynamic Modeling: Develop site-specific BESS models including Inverters (PCS), Battery
• Management Systems (BMS), and Power Plant Controllers (PPC). You must accurately model GridForming (GFM) logic, Virtual Inertia, and sub-50ms Fast Frequency Response (FFR).
• Supplier Technical Auditing: Critically review BESS and PPC supplier proposals. You must verify if their stated ramp rates, Round Trip Efficiency (RTE), and control loop latencies are mathematically achievable and compliant with TNB requirements.
• Grid Impact Studies: Lead the execution of Load Flow, Short Circuit, and Transient Stability studies. must specifically address Weak Grid ($SCR < 2.0$) challenges and ensure the BESS does not cause sub-synchronous oscillations.
• TNB Regulatory Representative: Serve as the lead technical representative at TNB GSO (EMS Unit) meetings. You will defend the simulation results and manage the end-to-end Interconnection Agreement (IA) process.
• Harmonic & Power Quality Validation: Perform detailed harmonic resonance studies to identify if a supplier's inverter switching frequency will clash with the local TNB grid impedance.

• Bachelor’s or Master’s Degree in Electrical Engineering (Power Systems or Power Electronics focus).
• Experience: * Minimum 8+ years in utility-scale power systems.
• Direct experience in modeling at least two utility-scale BESS projects (min 10MWh+) in a professional simulation environment.
• A proven track record of at least 3 successful TNB Grid Impact Study (GIS) approvals.
• Professional Status: Must be a Professional Engineer (Ir.) or a high-level Graduate Engineer registered with the Board of Engineers Malaysia (BEM).
• Technical Authority: Ability to demonstrate prior experience in rejecting or correcting supplier technical designs based on simulation findings.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Good discipline and behavior, willing to learn and grow.
• Responsible for Equipment Engineering KPI which is MTBA, OEE, machine downtime, Quality and Preventive maintenance.
• Ability to support on hardown machines and assist technician to troubleshoot the machine.
• Ability to support on machines improvement in term of productivity and quality.
• "This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule."

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives

As our Hosting Systems Engineer you’ll be responsible for designing, implementing, maintaining, and managing the infrastructure that powers web services, applications, and customer data. This role sits at the intersection of system administration, infrastructure, and cloud technology, ensuring that hosted systems remain available, secure, and efficient. 

Within this role responsibilities will include the management and optimisation of NEXTDC computing and storage infrastructure, including Active Directory, Windows (and/or other systems) Server environments, and Hyper-V virtualisation. The role will drive the overall health and performance of NEXTDC systems, designing solutions for scalability and high availability, supporting Azure integrations, and managing storage solutions. ​

Your scope will cover:

• Designing and implementing scalable solutions for Windows Server environments (2016, 2019, 2022), Active Directory, and Hyper-V virtualisation
• Overseeing the architecture, maintenance, and optimisation of Group Policies, DNS, DHCP, and FSMO roles
• Developing and testing disaster recovery plans, manage backups (SAN), configure failover clusters, and ensure minimal downtime in case of system failures
• Monitoring system health for reliability, scalability, and security and provide advanced troubleshooting for complex system issues; identify and resolve performance bottlenecks
• Leading automation initiatives using PowerShell to streamline system management and improve operational efficiency
• Executing security measures, including role-based access control, encryption (BitLocker), and compliance with auditing standards
• Performing patch management using WSUS or SCCM, ensuring secure and timely deployment of updates and addressing vulnerabilities
• Supporting hybrid cloud initiatives, including Azure AD integration, cloud backup, and cloud-to-on-premises connectivity

Your technical skillset will include:

• Strong knowledge of Linux, Unix, and Windows Server systems
• Proficient in Windows Server administration and Active Directory management
• Expertise in Hyper-V, storage solutions (SAN, NAS, iSCSI, RAID), and PowerShell scripting
• Knowledge of networking protocols (TCP/IP, VPN, firewalls), patch management (WSUS, SCCM), and security tools (Windows Defender, role-based access control)
• Scripting/Automation: Proficiency in scripting languages (e.g., PowerShell, Bash) and automation tools like Ansible
• Familiarity with disaster recovery, backup solutions​
• Knowledge of Azure hybrid environments, incl. integration

Key Responsibilities

• Develop, implement, and monitor cleanroom environmental surveys, to verify compliance and support area buy-off.                             
• Develop and execute contamination sampling plans for cleanroom environmental, equipment, tools, and process samples to ensure cleanliness and prevent yield-impacting defects.                            
• Perform routine and event-based environmental and equipment sampling to support operational readiness and cleanroom classification.                                
• Manage handling and qualification of cleanroom indirect materials by setting cleanliness criteria, performing inspections, and approving materials for use.                                   
• Define cleanroom protocols, including gowning, behavior, and contamination prevention practices, and provide training to ensure compliance.                                   
• Define and coordinate with laboratories implement test plans, analyse cleanliness data, investigation deviations, and recommending mitigation actions for product & process cleanliness compliance.    
• Collaborate with cross-functional teams in production, facilities, quality, and engineering to support contamination control strategies and maintain acceptable cleanliness levels.

Specification of work task or Main Responsibilities and Duties:

Repair Service Engineer with repair shop duties is responsible for diagnosing, repairing, and testing equipment, machinery, or electronics - either directly on-site at machine or in the service room's workshop.

• Very hand on oriented person. Figuring out how to repair/overhaul parts of semiconductor final test machines and afterwards defining procedures how to repair
• Experience in mechanical repair and/or electronics repair is a must
• Diagnose and troubleshoot mechanical and electrical issues in supporting equipment like Work piece carrier, Trax, board, module and other relevant Equipment/Production.
• Identifying the root cause of supporting equipment malfunctions and performing necessary repairs, which may involve disassembling, replacing parts, and reassembling.
• Conducting regular inspections and preventative maintenance to ensure supporting equipment runs smoothly and to identify potential problems.
• Maintaining accurate records of repairs and maintenance activities
• Ensuring all repairs and maintenance activities adhere to safety regulations and procedures
• Recommending improvements to maintenance procedures and equipment to enhance efficiency and reliability
• Support and train Technician in execution of repairing activities.
• Align changes with lead plant engineering
• Electrical buyoff for Equipment (MST-FCM)
• Arrange supplier to perform Automatic shelf System (E.g.: Modular/Kardex) service and maintenance together with spare part team.
• Providing technical assistance to other engineers, technicians, or users of the equipment only assign by Team Lead/Department head.
• Take care of spare parts and consumables which are not ordered under the standard spare part process with automatic reordering once stock limit reached
• Execute any other related duties aligned in Daily Leadership Routine and assigned by Team Leads/Department Head.

BROAD FUNCTIONS :

• To plan, coordinate and follow-up sputter systems start-up / conversion activities and process documentation.
• To audit sputter parameters and practice periodically, include online SPC and procedure conformance.
• To lead sputter process related issues trouble shooting (common causes), work closely with shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time), yield & quality goal.
• To lead Sputter Process Improvement Projects (SU/STT/Cost/Quality/PPH & others), which include new products/machines/process qualification.
• To lead, supervise and coach/train process tech, include engineering specialist and characterize technicians.

RESPONSIBILITIES :

Regular

• Responsible for sputter process related issues trouble shooting (common causes), work closely with Shift process team in sputter process sustaining, trouble shooting & improvement in order to achieve sputter utilization (down time) & quality goal.
• Responsible to lead, supervise and coach/train process tech, include engineering specialist and characterize technicians. Responsible to train and share PMR/DS sputter process and yield improvement knowledge with the team.
• Responsible for sputter parameters monitoring, include online SPC monitoring and procedure conformance.
• Responsible for sputter machine start-up include process characterize (new products & process changes).
• Responsible for new products/machines/process qualification.
• Responsible for sputter process improvement projects (SU/STT/Cost/Quality/PPH & others).
• Others include FMEA.
• Understand and accept responsibility for performing jobs safely
• Follow safety and health rules

Irregular

• Responsible to assist in sputter yield related issues trouble shooting (common causes). Work closely with Anelva yield team in sputter yield sustaining, trouble shooting & improvement in order to achieve sputter yield goal. This includes 0725 Operation Yield Improvement.
• Other supervisor assigned task
• Improve Media magnetic baseline: ACC% and to enable process stability and repeatability via recipe tuning and optimization. Responsible for new product qualifications.  

The Senior Packaging Engineer will lead packaging development and qualification activities for WD's HDD and Flash storage products. This is a technically hands-on and cross-functional leadership role — you will mentor junior engineers, drive complex packaging programs, and interface directly with customers, suppliers, and global engineering teams.

You are expected to operate with high autonomy, make independent technical decisions, and represent the Packaging Engineering function in NPI and sustaining programs.

Key Responsibilities : 
Technical Leadership

• Lead end-to-end packaging design, development, and qualification for complex HDD/Flash programs
• Define packaging architecture and material strategy for new and sustaining products
• Make independent technical decisions on packaging design trade-offs (cost vs. protection vs. sustainability)
• Act as Subject Matter Expert (SME) for packaging within cross-functional teams

Design & Qualification

• Own packaging qualification plans and test execution per ISTA/ASTM standards
• Review and approve packaging specifications, BOMs, and qualification reports
• Lead Engineering Change Orders (ECOs) and deviation requests
• Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) reviews

NPI & Program Management

• Lead packaging workstream for NPI programs from concept to mass production
• Manage packaging milestones and deliverables within program timelines
• Interface with global product teams, customers, and contract manufacturers

Vendor & Supply Chain

• Develop and qualify new packaging suppliers in Malaysia/ASEAN
• Lead supplier performance reviews and cost negotiation
• Drive packaging cost reduction (cost down) initiatives

People & Mentorship

• Mentor and coach junior/mid-level packaging engineers
• Conduct technical reviews and provide guidance on complex issues
• Support team capability building and knowledge sharing

Compliance & Sustainability

• Ensure all packaging meets regulatory requirements (RoHS, REACH, ISTA)
• Champion WD sustainability goals through eco-packaging innovation
• Maintain quality documentation per WD QMS standards

Continuous Improvement

• Lead RCCA for field packaging failures and damage incidents
• Drive Lean/Six Sigma improvement projects within packaging function
• Benchmark industry trends and propose technology upgrades

We are seeking a skilled Azure Cloud Engineer to join our team. The ideal candidate will have a strong background in DevOps practices, cloud solutions, and network engineering in Microsoft Azure. This role involves maintaining and developing a cloud environment that hosts mission critical financial services applications used across Australia and New Zealand. This role is pivotal for ensuring the delivery of high-quality, scalable, and secure Microsoft Azure cloud solutions.

Key Responsibilities:

• Apply DevOps practices, including Continuous Integration, Continuous Delivery, Infrastructure as Code to deliver a cloud environment that enables software development teams to deploy projects with ease.
• Provide expertise in Cloud Solutions, including deployment pipelines, automation, virtual machines, Azure PaaS services.
• Investigate identified security vulnerabilities and implement technical solutions to resolve them.
• Apply approved network changes in the cloud environment, including provisioning and changes to Network Security Groups, subnets, virtual networks and firewall rules.
• Collaborate with other engineers to ensure consistency, efficiency and quality across cloud environments and support achieving team objectives.
• Support efforts to proactively manage cloud hosting costs through appropriate provisioning and sizing of cloud resources and monitoring of resource utilisation.
• Contribute to technical documentation of the cloud environment and processes for supporting it.
• Ensure the cloud environment is maintained to high levels of availability and performance in line with service level commitments.

We are seeking a highly motivated and detail-oriented individual to join our team in the Business Process Management & System Projects function. The role offers an exciting opportunity to work on process improvement initiatives, digital transformation, and system implementation projects that drive efficiency and innovation across the organization.

ESSENTIAL DUTIES AND RESPONSIBILITES: 

• Perform product setup for NPI builds, including MES configuration and routing creation via Engineering Change Management.
• Provide PDM NPI related troubleshooting and issue resolution.
• Act as key user and SME for MES and PDM NPI processes, supporting functionality enhancements and process improvements.
• Consolidate and align PDM NPI enhancement requirements across operations, IT, and stakeholders.
• Drive design, development, and deployment of SAP & MES solutions to improve process efficiency, traceability, and data accuracy.
• Support end-to-end project execution and system enhancements through cross-functional collaboration, including requirements, testing, training, and change management.

• Set up and drive operations of Green Energy Programmes between Solarvest and Centexs (Up to 4 programs such as Smart Solar PV, Green Mobility and Storage, Green Hydrogen, Hyperscale Green Data Centre and Smart Solar PV Installation)
• Coordinate licensing approvals with relevant authorities for Centexs
• Conduct refresher courses to the Centexs Trainers and participate in Students Engagement Initiatives in Kuching and Mukah
• Update program syllabus every 6 months including new syllabus content
• Drive the Trainer-the-Trainers for Hyperscale Green Data Centre with Strategic Partners
• Coordinate job placement for all trainees and support employability initiative by outreach/marketing events together with Centexs Employment Team
• Conduct the Operation and Maintenance activities of the Testbeds in Kuching and Mukah
• Coordinate Centexs rooftop monthly and project billings and payment collection
• Collaboration with Centexs R&I team to drive and support commercialisation of testbeds
• Invitation and involvement of industry experts to the Programs teaching
• Support Centexs on co-marketing and technology launching events, become the first contact point for any VIP visits to testbeds
• And any other assignment / task as deemed fit

• Candidate must possess at least a Bachelor’s Degree in Engineering
• Electrical degree will be plus advantage
• Ability to multi-task and work in a startup environment
• Required language(s): Bahasa Malaysia, English
• Fast learner, ability to understand technical/engineering requirements
• Proficient in Microsoft Office
• Passionate to learn, able to work systematically, demonstrate accountability
• Willing to travel

AGEO is a leading innovator in automation technology, specializing in solutions for heavy-duty operations. We develop cutting-edge embedded systems to support industrial vehicles in the most demanding real-world environments in the US.

We are looking for a Senior Embedded Software Engineer to take technical ownership of embedded firmware and system software that power autonomous and connected vehicle platforms. In this role, you will work across the full lifecycle, from early hardware bring-up and system architecture through field deployment and fleet updates, playing a key role in shaping the future of AGEO's autonomous systems.

What you'll do:

• Develop embedded firmware for custom ECUs and IoT devices used in vehicle platforms - from initial hardware bring-up through production deployment
• Write device drivers and integration layers for sensors and communication modules including GNSS receivers, LoRa/LoRaWAN modules, cellular modems, CAN/J1939 buses, etc.
• Build and maintain ROS2-based applications running on embedded Linux platforms, including containerized workloads and OTA update pipelines
• Collaborate closely with hardware engineers during schematic review, PCB bring-up, and hardware-software co-debugging on custom designs
• Define and maintain firmware architecture, interface specifications, and test procedures to ensure reliability, robustness, and maintainability in harsh field environments
• Lead improvements to CI/CD pipelines, automated testing, and release processes for embedded firmware

What we're looking for (Requirements):

• Strong C/C++ for embedded systems (bare metal, RTOS, and embedded Linux)
• Experience designing and maintaining production-grade embedded firmware with real hardware constraints
• Experience deploying containerized applications (Docker or equivalent)
• Experience working with embedded interfaces and buses: I2C, SPI, UART, CAN/CAN FD
• Experience with network protocols such as TCP/IP, UDP, HTTP, MQTT
• Experience with LoRa/LoRaWAN or other wireless communication protocols
• Proficiency using hardware debug and validation tools (logic analyzers, oscilloscopes, multimeter, etc.)
• Ability to read schematics, interpret IC datasheets, and work effectively at the hardware-software boundary
• Solid Git workflow for collaborative development and code review
• Good communication skills
• 4+ years of embedded software development experience

Education and Experience:

• B.S. degree or higher in Computer Engineering, Electrical Engineering, or equivalent

Nice to Have (Bonus):

• Experience with ROS2, including node architecture, and sensor integration, and system bring-up
• GNSS (RTCM, PPP, RTK) application knowledge and field deployment experience
• Python programming experience
• Unit testing and CI/CD experience
• RTOS expertise (QNX, Ubuntu RT, FreeRTOS, ZephyrRTOS) and Linux for edge compute (driver bring up and scheduling/timing)
• UML/SysML experience

We're looking for an experienced and visionary Principal Engineer, Product Development Engineering to join our dynamic team. In this pivotal role, you will drive the development and optimization of innovative products from conception through qualification, ensuring exceptional quality and reliability. You will lead cross-functional teams, mentor engineering talent, and champion technical excellence while collaborating closely with design, manufacturing, and quality teams to deliver products that exceed customer expectations. This is an opportunity to make a significant impact on product strategy and engineering excellence within a forward-thinking organization.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead and drive product development initiatives from pre-silicon design through first silicon and full qualification, ensuring alignment with technology and product roadmaps.
• Develop and implement comprehensive test strategies, test flows, and screening methodologies that optimize product quality and reliability metrics for wafer testing. 
• Conduct in-depth electrical and functional failure analysis during new product development and qualification phases, identifying root causes and defining corrective action plans.
• Collaborate with cross-functional stakeholders including design engineers, device engineers, manufacturing partners, and quality teams to resolve complex technical challenges.
• Define and refine product specifications, test algorithms, and stress screening methods based on rigorous data analysis and industry best practices.
• Monitor product quality metrics and reliability performance across product lines, driving continuous improvement initiatives and process optimization.
• Partner with system and firmware teams to develop robust error handling algorithms and enhance overall product resilience.
• Mentor and support junior engineers, fostering a culture of technical excellence, innovation, and collaborative problem-solving.
• Communicate technical findings, recommendations, and strategic insights to senior leadership and cross-functional partners with clarity and precision.
• Manage project timelines, deliverables, and resource allocation to ensure efficient execution and on-time product launches.
• Develop and maintain technical documentation, product specifications, and engineering standards that support organizational goals.
• Champion innovation and process improvement initiatives that enhance product performance and manufacturing efficiency.

We are seeking an experienced Test Application Engineer to support and sustain Final Test (FT) operations in a high-volume semiconductor manufacturing environment. This role focuses on maintaining stable test performance, resolving production test issues, supporting equipment and hardware, and ensuring consistent product quality and manufacturing efficiency.

Key Responsibilities

• Sustain and maintain FT ATE performance for mass production
• Provide daily production test support to ensure stable test operations
• Troubleshoot and resolve test-related issues including yield drops, tester alarms, and test escapes
• Perform test correlation, limit validation, and guard band verification
• Support test hardware maintenance (load boards, sockets, cables, probe interfaces)
• Coordinate with Process, QA, and Manufacturing teams to resolve tester and handler issues
• Support engineering change implementation (ECR / ECO) related to test
• Assist in NPI FT handover from development to mass production
• Support temperature testing, re-test, and containment activities
• Participate in failure analysis and root cause investigations
• Prepare and maintain test-related documentation and reports
• Prepare and maintain Equipment/Tester OEE.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training, and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support systems comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

About the role 

At SEEK, we’re creating technology that helps people live more fulfilling working lives. As a Level 3 Software Engineer, you’ll design, build, and maintain web applications used by millions. You’ll work closely with designers, product managers, and engineers to deliver high-quality, scalable solutions that enhance SEEK’s platforms.

Reporting to a Senior Engineering Manager, you’ll be part of a collaborative squad that values innovation, learning, and craftsmanship. You will shape technical designs, write clean and efficient code, and mentor team members while driving improvements in SEEK’s engineering practices. Success means delivering impactful features, strengthening performance, and contributing to SEEK’s mission of connecting people with work.

What you will do 

• Build and maintain high-performing front‑end and back‑end applications
• Collaborate with cross‑functional teams to design and refine technical solutions
• Contribute to architecture decisions and technical direction
• Uphold quality through testing, reviews, and documentation
• Enhance developer workflows and CI/CD practices
• Share knowledge and mentor peers in engineering best practices
• Support system reliability and continuous improvement initiatives

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

About You

You will join the SEEK Business engineering team — a self‑contained scale‑up powered by SEEK’s global platform. You will design, build, and maintain full‑stack software that powers Australia’s largest online business‑for‑sale marketplace. Working across TypeScript, NodeJS, React, GraphQL, and AWS, you’ll deliver secure, reliable, and scalable solutions end‑to‑end. You will collaborate daily with product managers, designers, and fellow engineers, contributing to architecture decisions and continuous improvement in DevOps, CI/CD, and automation. Success in this role means shipping well‑crafted code, owning complex technical decisions, and helping the team raise engineering quality while driving rapid delivery.

What You Will Do

• Design and build high‑performance full‑stack applications using modern tech
• Own services through development, testing, deployment, and production support
• Contribute to architecture decisions and continuous delivery improvements
• Collaborate with design, product, and cross‑functional teams to deliver at speed
• Strengthen DevOps culture through CI/CD, observability, and automation
• Ensure reliability and performance of SEEK Business’s platforms
• Share learnings and mentor peers to uplift technical standards

As our DevOps Engineer - Networks you’ll be responsible for designing, building, and operating the initial network automation, monitoring, and tooling stack for IT and OT network operations in the data centre. In this role you’ll establish first generation scripts, pipelines, standards, and documentation to move the organisation from manual operations to automated, code driven network practices, under support from the Network & Security Operations team.

Within this position, your scope will cover:

• Designing and implementing the first generation of network automation playbooks, scripts, and templates for standard changes, provisioning, and configuration compliance across IT and OT networks
• Selecting and implementing initial toolchain components (e.g. Git repository, CI/CD tool, Ansible/Terraform, basic test frameworks) defining how they will be used by the operations team
• Establishing and configuring core network monitoring and logging for the data centre (devices onboarded, alert rules, dashboards, basic SLOs) and integrating where possible with ITSM/CMDB/DCIM platforms
• Define and document standard operating procedures and runbooks for using automation and tools (how to request changes, how pipelines work, how to roll back)
• Support incident and problem management by providing tooling, diagnostics scripts, and data exports to accelerate root cause analysis and post incident reviews

Your technical skillset will include:

• Strong practical Python and shell scripting skills to build automation, small tools, and integrations without existing frameworks
• Hands on experience setting up at least one network automation/IaC stack (e.g. Ansible + Git + CI, or Terraform based workflows) from an early stage starting point
• Configuration and onboarding devices into monitoring/logging platforms (e.g. SolarWinds/PRTG, Prometheus/Grafana, Elastic/Splunk), define alert rules, and build useful dashboards
• Switching, routing, firewalls, and VPN in data centre or enterprise networks, including HA and basic segmentation designs
• Designing simple but robust automation patterns and coding standards suitable for use by operations engineers (idempotent changes, rollbacks, safety checks)

Senior / Lead DevOps Engineer

Why You Should Apply
- Varied and strategic role across CI/CD, Infrastructure-as-Code (IaC), and Cloud Automation, reporting directly to the Head of Engineering.
- Lead all DevOps initiatives and set the foundations for CI/CD, automation, and shift-left practices.
- Clear 6-12 month objective to standardise CI/CD and reduce manual release and build processes, with full leadership support and resources.
- Opportunity to join a stable global financial services company (non-bank) that has established a regulated product suite in Malaysia over the past 5 years.

What You Will Do
- Lead the design and implementation of CI/CD pipelines, reusable pipeline architecture, quality gates, branching governance, automation testing, and release discipline.
- Establish CI foundations across repositories, build validation, early defect detection, and Git workflow standards.
- Drive Continuous Delivery and Deployment Automation, improve rollback strategies, release traceability, and reduce manual intervention.
- Implement Infrastructure-as-Code practices and cloud automation initiatives.
- Enhance deployment strategies, including blue-green and canary deployments.

What You Will Need
- Minimum 6 years of hands-on DevOps experience with AWS or similar platforms (Azure, GCP).
- Relevant experience as a DevOps engineer, cloud engineer, platform engineer, build & release engineer, or SRE.
- Ability to work independently and hands-on, driving digital transformation without reliance on a large team or strict SOPs.
- Experience in fintech, tech companies, product companies, or digital transformation teams within enterprise/MNC environments.
- Strong CI/CD transformation experience (Git-based CI, Jenkins, etc.).
- Hands-on experience with containerization and Infrastructure-as-Code.

About the Company & Team
- Malaysian team and product suite are less than 5 years old, part of a globally established fintech and financial services company operating in 15 countries.
- Regulated under Bank Negara Malaysia, ensuring high regulation and financial security.
- All products are built in-house, enabling long-term initiatives with internal technical capability.
- Provides end-to-end solutions across front, middle, and back office functions, serving both retail and institutional customers under its own brand and a white-label B2B product.
- Hybrid work arrangement, based in central Kuala Lumpur.

How to Apply
- Click the “apply” button. You may submit your CV or LinkedIn profile—whatever you prefer.
- The recruiter is happy to share more information with you before you proceed.
- Every applicant or enquiry will receive a reply.

Note
- Employment passes, work visas, or relocation support are not available.
- Only candidates with work rights in Malaysia will be considered.