Total 69 Senior Executive Software Engineer job vacancies in Malaysia

The Senior Packaging Engineer will lead packaging development and qualification activities for WD's HDD and Flash storage products. This is a technically hands-on and cross-functional leadership role — you will mentor junior engineers, drive complex packaging programs, and interface directly with customers, suppliers, and global engineering teams.

You are expected to operate with high autonomy, make independent technical decisions, and represent the Packaging Engineering function in NPI and sustaining programs.

Key Responsibilities : 
Technical Leadership

• Lead end-to-end packaging design, development, and qualification for complex HDD/Flash programs
• Define packaging architecture and material strategy for new and sustaining products
• Make independent technical decisions on packaging design trade-offs (cost vs. protection vs. sustainability)
• Act as Subject Matter Expert (SME) for packaging within cross-functional teams

Design & Qualification

• Own packaging qualification plans and test execution per ISTA/ASTM standards
• Review and approve packaging specifications, BOMs, and qualification reports
• Lead Engineering Change Orders (ECOs) and deviation requests
• Drive DFM (Design for Manufacturability) and DFA (Design for Assembly) reviews

NPI & Program Management

• Lead packaging workstream for NPI programs from concept to mass production
• Manage packaging milestones and deliverables within program timelines
• Interface with global product teams, customers, and contract manufacturers

Vendor & Supply Chain

• Develop and qualify new packaging suppliers in Malaysia/ASEAN
• Lead supplier performance reviews and cost negotiation
• Drive packaging cost reduction (cost down) initiatives

People & Mentorship

• Mentor and coach junior/mid-level packaging engineers
• Conduct technical reviews and provide guidance on complex issues
• Support team capability building and knowledge sharing

Compliance & Sustainability

• Ensure all packaging meets regulatory requirements (RoHS, REACH, ISTA)
• Champion WD sustainability goals through eco-packaging innovation
• Maintain quality documentation per WD QMS standards

Continuous Improvement

• Lead RCCA for field packaging failures and damage incidents
• Drive Lean/Six Sigma improvement projects within packaging function
• Benchmark industry trends and propose technology upgrades

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

We are seeking a highly motivated and detail-oriented individual to join our team in the Business Process Management & System Projects function. The role offers an exciting opportunity to work on process improvement initiatives, digital transformation, and system implementation projects that drive efficiency and innovation across the organization.

ESSENTIAL DUTIES AND RESPONSIBILITES: 

• Perform product setup for NPI builds, including MES configuration and routing creation via Engineering Change Management.
• Provide PDM NPI related troubleshooting and issue resolution.
• Act as key user and SME for MES and PDM NPI processes, supporting functionality enhancements and process improvements.
• Consolidate and align PDM NPI enhancement requirements across operations, IT, and stakeholders.
• Drive design, development, and deployment of SAP & MES solutions to improve process efficiency, traceability, and data accuracy.
• Support end-to-end project execution and system enhancements through cross-functional collaboration, including requirements, testing, training, and change management.

About You

You will join the SEEK Business engineering team — a self‑contained scale‑up powered by SEEK’s global platform. You will design, build, and maintain full‑stack software that powers Australia’s largest online business‑for‑sale marketplace. Working across TypeScript, NodeJS, React, GraphQL, and AWS, you’ll deliver secure, reliable, and scalable solutions end‑to‑end. You will collaborate daily with product managers, designers, and fellow engineers, contributing to architecture decisions and continuous improvement in DevOps, CI/CD, and automation. Success in this role means shipping well‑crafted code, owning complex technical decisions, and helping the team raise engineering quality while driving rapid delivery.

What You Will Do

• Design and build high‑performance full‑stack applications using modern tech
• Own services through development, testing, deployment, and production support
• Contribute to architecture decisions and continuous delivery improvements
• Collaborate with design, product, and cross‑functional teams to deliver at speed
• Strengthen DevOps culture through CI/CD, observability, and automation
• Ensure reliability and performance of SEEK Business’s platforms
• Share learnings and mentor peers to uplift technical standards

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training, and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support systems comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

We are actively advancing technological innovation in the semiconductor package assembly, with a focus on next generation packaging technologies such as PowerQFN, Flip-Chip, and SiP. In particular, the fields of AI, High Performance Computing (HPC), and Vertical Power Delivery (VPD) are rapidly increasing their demand for higher density, higher reliability, and high thermal dissipation package technologies.

This role offers the opportunity to work on cutting edge technologies such as power packages for AI/HPC, VPD, Server VR core/peripheral, and Accelerator/GPU markets and contribute to the development of packaging technologies that underpin innovations shaping society, including AI and next generation mobile computing.

Key Responsibilities:

• Design and develop package and interconnect methods for Renesas’s packaging needs in the areas of Power SiP/modules, flip-chip LGA, multi-chip module and power device packaging
• Work with OSAT/CM to develop, run DOEs to optimize processes and establish process specifications.
• Work with Product Groups and Reliability teams to qualify new packages and processes within required time frame.
• Ensure smooth transition into production by resolving all process integration issues, establishing production controls and monitors, and monitoring / resolving process issues.
• Develop and maintain technical expertise on advances and innovations in advanced leadframe, power SiP/modules, and flip chip interconnects.
• Address internal and external customer complaints working with peers of Marketing, Product groups, Quality and Operations organization to satisfy growth in businesses.

We are looking for a skilled Data Engineer with strong experience in cloud platforms like Amazon Web Services and Microsoft Azure. The candidate will be responsible for building scalable data pipelines, managing large datasets, and supporting analytics and reporting systems.

Senior / Lead DevOps Engineer

Why You Should Apply
- Varied and strategic role across CI/CD, Infrastructure-as-Code (IaC), and Cloud Automation, reporting directly to the Head of Engineering.
- Lead all DevOps initiatives and set the foundations for CI/CD, automation, and shift-left practices.
- Clear 6-12 month objective to standardise CI/CD and reduce manual release and build processes, with full leadership support and resources.
- Opportunity to join a stable global financial services company (non-bank) that has established a regulated product suite in Malaysia over the past 5 years.

What You Will Do
- Lead the design and implementation of CI/CD pipelines, reusable pipeline architecture, quality gates, branching governance, automation testing, and release discipline.
- Establish CI foundations across repositories, build validation, early defect detection, and Git workflow standards.
- Drive Continuous Delivery and Deployment Automation, improve rollback strategies, release traceability, and reduce manual intervention.
- Implement Infrastructure-as-Code practices and cloud automation initiatives.
- Enhance deployment strategies, including blue-green and canary deployments.

What You Will Need
- Minimum 6 years of hands-on DevOps experience with AWS or similar platforms (Azure, GCP).
- Relevant experience as a DevOps engineer, cloud engineer, platform engineer, build & release engineer, or SRE.
- Ability to work independently and hands-on, driving digital transformation without reliance on a large team or strict SOPs.
- Experience in fintech, tech companies, product companies, or digital transformation teams within enterprise/MNC environments.
- Strong CI/CD transformation experience (Git-based CI, Jenkins, etc.).
- Hands-on experience with containerization and Infrastructure-as-Code.

About the Company & Team
- Malaysian team and product suite are less than 5 years old, part of a globally established fintech and financial services company operating in 15 countries.
- Regulated under Bank Negara Malaysia, ensuring high regulation and financial security.
- All products are built in-house, enabling long-term initiatives with internal technical capability.
- Provides end-to-end solutions across front, middle, and back office functions, serving both retail and institutional customers under its own brand and a white-label B2B product.
- Hybrid work arrangement, based in central Kuala Lumpur.

How to Apply
- Click the “apply” button. You may submit your CV or LinkedIn profile—whatever you prefer.
- The recruiter is happy to share more information with you before you proceed.
- Every applicant or enquiry will receive a reply.

Note
- Employment passes, work visas, or relocation support are not available.
- Only candidates with work rights in Malaysia will be considered.

To lead and manage construction works during operational phase, including system upgrade, modification, and performance improvement activities. The role ensures all design and execution works are delivered safely, accurately, and in compliance with technical, quality, and regulatory standards.

Construction Planning and Execution:

• Manage construction works as per developed project execution plan, schedules, milestones, drawings, technical specifications.
• Address site technical queries, resolve issues, and provide necessary approvals to maintain progress
• Develop and lead catch-up plans for construction, and commissioning activities in order to be aligned with project objectives and timelines.
• Carry out inspections to ensure work quality, compliance, and safety
• Provide daily updates and reports on construction performance to stakeholders

Engineering Coordination:

• Review of Approved for Construction (AFC) drawings to ensure practicality and compliance with project specifications, codes, and standards.
• Resolve construction technical issues, provide guidance, and interface with design teams and consultants

Vendor/Subcontractor Management:

• Review vendor/subcontractor proposals, method statements and technical documentation for compliance with project requirements.
• Ensure timely delivery of equipment and materials as per project timelines.
• Collaborate with internal teams to ensure construction material specification compliance with project requirements.

Budget and Cost Control:

• Assist in preparing and monitoring the project budget and controlling costs
• Identify potential cost overruns, changes, or additional works, and ensure timely approval through change management processes
• Provide regular updates and reports on cost performance to stakeholders

Stakeholder Communication:

• Act as the primary construction liaison between the client, TNB/Government authorities, project teams, vendors, and subcontractors
• Attend project construction, meetings, present updates, and resolve construction issues.
• Ensure timely communication and reporting to all relevant parties on construction status and key issues

Risk Management:

• Identify and assess project risks during all phases and develop mitigation plans
• Monitor risks throughout the project and ensure prompt action to minimize impacts

Quality Assurance and Safety:

• Ensure all engineering and construction activities comply with QA/QC procedures and safety standards
• Address non-conformities and ensure corrective actions are implemented effectively
• Promote a culture of safety and quality throughout the construction period.

Commissioning and Handover:

• Prepare, review all the testing procedure and program as per specifications
• Oversee the commissioning phase, ensuring all systems are tested and operational as per specifications
• Review final documentation from vendor/subcontractors to facilitate project handover
• Support client training and operational readiness as required

• Minimum of 3 years of electrical/civil engineering or construction work background, with construction management related to High Voltage (HV) power system being added advantage.
• Bachelor’s degree in electrical or civil engineering or equivalent from a recognized institution
• Possess valid CIDB Green Card.
• Able to be located at outstation (i.e. construction site) during project execution.
• Knowledge of solar PV system installation, maintenance, performance monitoring, and electrical protection systems
• Familiarity with ISO 9001, ISO 14001, and ISO 45001 requirements is desirable
• Familiarity with construction requirements (e.g. JKR specifications, JPS specifications), and practical knowledge on “best practices” for construction activities.
• Strong understanding of low voltage (LV), Medium Voltage (MV) and High Voltage (HV) system integration and commissioning
• Competence in Microsoft Office (e.g. Project, Power Point, Excel, Words & etc.) and construction management software (e.g. Procore).
• Strong understanding of electrical drawings such as Single-Line-Diagram, PV Layout, etc.
• Strong understanding of civil drawings such as Foundation drawings, pile & rebar schedule, etc.
• Ability to perform technical due diligence, design validation, and retrofit feasibility studies
• Experienced in managing contractors, and site supervision
• Strong capability in planning and coordination with good resource management skills
• Timely proactive reporting to stakeholders.
• Strong analytical and problem-solving mindset with attention to detail
• Demonstrates leadership, accountability, and initiative in resolving technical issues
• Effective communicator with strong coordination and interpersonal skills
• Adaptable to field and office environments; able to manage multiple projects concurrently
• Upholds safety, integrity, and professionalism in all aspects of work

This role interfaces with cross functional teams on all phases of product life cycle. This role is responsible for driving yield enhancement, reducing test costs and ensuring the overall quality and manufacturability of the devices.  

Key Responsibilities

• Review and provide disposition on low-yield production lots, and drive root-cause analysis and corrective actions.
• Work closely with test engineering, assembly, quality, internal factory and OSAT to resolve issues efficiently and ensure smooth production flow
• Execute day to day sustaining activities (Overall lot rejection rate improvement, EQA hold rate reduction, SYL/ SBL sustaining, etc.) to ensure delivery fulfillment.
• Qualification and validation of new products, tester platform migration and various engineering activities. 
• Gross Margin Improvement Initiatives (Yield improvement, etc.).
• System integration.

Why You Should Apply
- Opportunity for professionals with both manual and automation testing experience to participate in a transition towards greater automation. Automation expertise is not required.
- As a senior team member, you will mentor and guide junior testers, positioning yourself for a leadership role within 1-2 years.
- Play a key role in shaping the automation strategy, experimenting with tools, and identifying test cases for future automation.
- Join a stable, global financial services company (non-bank) that has operated in Malaysia for 5 years, offering a locally regulated product suite.

What You Will Do
- Serve as the most senior Tester/QA in the team, responsible for manual test coverage, validating system behavior, identifying edge cases, and ensuring release quality across complex business workflows and system integrations.
- Translate business requirements into effective test strategies and scenarios, and perform functional, UAT, and regression testing.
- Guide junior testers and act as the liaison between testing and product & engineering teams to identify root causes for defects.
- Identify test cases suitable for automation and develop basic automated test scripts using tools such as Selenium, Cypress, or Playwright.
- Collaborate with DevOps and engineers to integrate automated tests into CI/CD pipelines, with support for strategy and scripting.
- This is not a people manager role; you will not directly manage junior testers. Leadership experience is not required, making this an ideal "in-between step" for senior testers seeking career advancement.

What You Will Need
- Willingness to work hands-on in a primarily manual environment while supporting the transition to automation.
- Ability to work independently and drive digital transformation without relying on a large team or strict SOPs.
- Experience in fintech, tech companies, product companies, or digital transformation teams within enterprise/MNC environments. Experience in other highly regulated industries is also welcome.
- At least 1 year of experience with automation tools (Selenium, Cypress, Playwright), including basic scripting. Exposure to API testing is a bonus.
- Ex-software engineers who have transitioned into testing/QA roles are encouraged to apply.

About the Company & Team
- The Malaysian team and product suite are less than 5 years old, but part of a globally established fintech and financial services company operating in 15 countries.
- Regulated by Bank Negara Malaysia, ensuring a highly regulated and financially secure environment.
- Products are built in-house, enabling long-term initiatives with internal technical capabilities.
- Provides end-to-end solutions across front, middle, and back office functions, serving both retail and institutional customers under its own brand and a white-label B2B product.
- Offers a hybrid work arrangement, based in central Kuala Lumpur.

How to Apply
- Click the “apply” button. You may submit your CV or LinkedIn profile—no need to worry if your CV is outdated.
- The recruiter is happy to provide more information before you proceed.
- Every applicant or enquiry will receive a reply.

Note
- Employment passes, work visas, or relocation support are not available.
- Only candidates with work rights in Malaysia will be considered.

• Design, develop, and optimize optical systems including camera systems and lighting configurations for test applications
• Develop and maintain automated reporting systems for Key Performance Indices related to Warranty Operations and test metrics
• Conduct comprehensive tests and validations for systems, test codes, and software solutions to ensure quality and reliability
• Identify and implement process improvement opportunities through collaboration with Engineering, Quality, Service Operations, and Brand Protection teams
• Analyze and provide recommendations for test infrastructure enhancements and optimization
• Develop and maintain test automation frameworks and tools to improve efficiency and reduce manual testing efforts
• Document test procedures, results, and technical specifications in accordance with company standards and best practices
• Collaborate cross-functionally to troubleshoot complex technical/ systemic issues and implement effective solutions
• Contribute to team objectives and support related deliverables as needed

ESSENTIAL DUTIES AND RESPONSIBILITIES:

We are seeking a highly motivated and talented Software Development Engineer to join our team at Sandisk. In this role, you will be instrumental in developing and maintaining our digital twin and machine learning software tools. Key responsibilities include:

1.      Develop and enhance our digital twin software solutions to improve efficiency and accuracy across the design and manufacturing processes.

2.      Leverage machine learning and data analytics techniques to optimize the design and manufacturing process, develop design recommendation systems, identify anomalies, and support failure analysis.

3.      Design, develop, and maintain software tools that streamline simulation workflows, minimize human error, and enhance the interpretation of simulation results.

This role interfaces with cross functional teams on all phases of product life cycle. This role is responsible for driving yield enhancement, reducing test costs and ensuring the overall quality and manufacturability of the devices.  

Key Responsibilities

• Review and provide disposition on low-yield production lots, and drive root-cause analysis and corrective actions.
• Work closely with test engineering, assembly, quality, internal factory and OSAT to resolve issues efficiently and ensure smooth production flow.
• Execute day to day sustaining activities (Overall lot rejection rate improvement, EQA hold rate reduction, SYL/ SBL sustaining, etc.) to ensure delivery fulfillment.
• Qualification and validation of new products, tester platform migration and various engineering activities. 
• Gross Margin Improvement Initiatives (Yield improvement, etc.)
• System integration.

Support continuous improvement and automation initiatives, productivity and quality excellence.

Key Responsibilities:

Test Manufacturing (Backend Operation) process improvements:

• Backend Process improvement (Standardization and automation)
• Product Yield improvement
• Product Quality improvement (Poka Yoke)
• Backend equipment and Productivity improvement
• New Equipment qualification and buyoff 
• Specs initiate, revise, and update in Agile system
• Support Internal Audit and Customer Audit
• RMA/ Customer Complain Investigation and Analysis
• New Packages BOM setup in Agile system
• Drive Automated processes to minimize human intervention error

Senior DevOps Engineer

Why You Should Apply
- Varied and strategic role across CI/CD, Infrastructure-as-Code (IaC), and Cloud Automation, reporting directly to the Head of Engineering.
- Lead all DevOps initiatives and set the foundations for CI/CD, automation, and shift-left practices.
- Clear 6-12 month objective to standardise CI/CD and reduce manual release and build processes, with full leadership support and resources.
- Opportunity to join a stable global financial services company (non-bank) that has established a regulated product suite in Malaysia over the past 5 years.

What You Will Do
- Lead the design and implementation of CI/CD pipelines, reusable pipeline architecture, quality gates, branching governance, automation testing, and release discipline.
- Establish CI foundations across repositories, build validation, early defect detection, and Git workflow standards.
- Drive Continuous Delivery and Deployment Automation, improve rollback strategies, release traceability, and reduce manual intervention.
- Implement Infrastructure-as-Code practices and cloud automation initiatives.
- Enhance deployment strategies, including blue-green and canary deployments.

What You Will Need
- Minimum 6 years of hands-on DevOps experience with AWS or similar platforms (Azure, GCP).
- Ability to work independently and hands-on, driving digital transformation without reliance on a large team or strict SOPs.
- Experience in fintech, tech companies, product companies, or digital transformation teams within enterprise/MNC environments.
- Strong CI/CD transformation experience (Git-based CI, Jenkins, etc.).
- Hands-on experience with containerization and Infrastructure-as-Code.

About the Company & Team
- Malaysian team and product suite are less than 5 years old, part of a globally established fintech and financial services company operating in 15 countries.
- Regulated under Bank Negara Malaysia, ensuring high regulation and financial security.
- All products are built in-house, enabling long-term initiatives with internal technical capability.
- Provides end-to-end solutions across front, middle, and back office functions, serving both retail and institutional customers under its own brand and a white-label B2B product.
- Hybrid work arrangement, based in central Kuala Lumpur.

How to Apply
- Click the “apply” button. You may submit your CV or LinkedIn profile—whatever you prefer.
- The recruiter is happy to share more information with you before you proceed.
- Every applicant or enquiry will receive a reply.

Note
- Employment passes, work visas, or relocation support are not available.
- Only candidates with work rights in Malaysia will be considered.

Senior Data Analytics Engineer / Lead

Location & Compensation
- KL Bangsar South (Hybrid)
- RM 8,000-14,000 Basic + Benefits

Why You Should Apply
- Join a data-first business intelligence platform and tech product company from Europe.
- Discover hidden value in unstructured data that drives significant business impact.
- Engage in a process of tracking, measuring, and iterating—not just handling data in and out.
- Provide actionable insights to corporate and enterprise clients, going beyond standard reporting.
- Future-proof your career by developing as a full stack data engineer and analytics professional, gaining a comprehensive understanding of the data lifecycle.

Key Responsibilities
- Split your role between 50% data engineering and 50% analytics.
- Identify and analyze trends, and conduct ad-hoc analyses to generate insights that support client decision-making.
- Collaborate with project managers and engineers to understand client needs, connect data sources, and deliver tailored solutions.
- Design, develop, and implement data pipelines to ingest and transform large volumes of data, and build scalable data models that power the core platform.
- Perform data integration and preparation, including ETL processes and data structure optimization, to streamline analysis workflows.

Requirements
- Educational background in Mathematics and Statistics, Analytics, Actuarial Science, or Data Science.
- Strong analytical mindset with a passion for working with numbers and converting data into actionable insights.
- Ability to define and solve ambiguous, open-ended business problems using exploratory and analytical approaches.
- Proficiency in SQL and Python for data transformation, cleaning, and preparation.
- Current role could in Data Analytics or Data Analyst / Data Engineer / Business Intelligence but you must have the Analytics experience

About the Company & Team
- A scaling European tech company with a Malaysian Engineering Hub, serving B2B enterprise customers.
- Specializes in niche, data-driven business insights tools for cargo, logistics, aviation, and shipping sectors.
- Supports clients in making informed commercial decisions related to routes, maintenance, demand planning, operations, and forecasting models.
- Opportunity to work with global customers, with a European head office and a Malaysian engineering hub.

How to Apply
- Click the “apply” button to submit your application.
- You may submit an updated CV or simply share your LinkedIn profile.
- The recruiter is available to provide more information before you proceed.

Additional Notes
- Employment passes, work visas, or relocation support are not provided.
- Only candidates with work rights in Malaysia will be considered.
- This role is not suitable for fresh graduates; 4-8+ years of relevant experience is required.

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support system comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

• Responsible in Process detection engineering - SPI/AOI/AXI for new product introduction/development and sustaining product engineering activities.
• Responsible for the SMT issues and internal/external quality feedback that related to SPI/AOI/AXI process. Troubleshoot the system, process, detection root causes and attain the corrective action to the issues.
• To plan, create and ensure the necessary SPI/AOI/AXI programs and process documents are completed and updated in time for production.
• Ensure that the respective area workstation, computer, and network system are well maintained in operation condition. Programs are regularly updated and back up.
• To participate in new product development discussion and contributes ideas and comments in the area of PCB assembly automation and process technology.
• To monitor the SPI/AOI/AXI inspection/detection windows and modify whenever necessary to increase machine capability and quality.
• To continuously review and improve strategy and technology in the SPI/AOI/AXI inspection processes.
• To be the Data Owner of the processes under care and set-up of a proper Data Management for Data Visualization and Analytics.
• To ensure machine calibration are per schedule.
• To participate, setup and review traceability for respective area and improve timely.
• To maintain and upgrade machine capability timely via engineering benchmarking projects.
• To assist in major machine breakdown troubleshooting.
• To provide training on machine maintenance, operation, and processes to all technical support personnel in detection process.
• To work closely with ME/MFG-x to comply, standardize and improve processes via PFMEA and VVts/DMDs.
• Prepare ROI as per needed from superior especially technical terms on the machine specification.
• To work with QMM on process and line audit.
• Any other assigned by immediate supervisor from time to time.