Total 17 Full-time Product Design job vacancies in Penang

Responsibilities:

• In-charge of production planning/inventory and scheduling of delivery.
• Monitoring and ensuring production running smoothly that in accordance to customers' requirement.
• Ensure the plan aligns with the material and capacity outlook.
• Liase with the customers and sub-contractors for delivery and quantity requirements.
• Work closely with production, material and inventory control to meet the customers's requirement with maximum efficiency.
• Prepare and submit status and performance reports.

Requirements:

• Working experience in a manufacturing enviroment and production planner.
• A fast learner and to work indepently.
• Outstanding organizational and problem-solving skills.
• Excellent communication abilities.
• Minimum SPM/O level or equivalent; Further education or cetification is preferred.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Personal development opportunities

Key Responsibilities:

• Design and develop electronic hardware for IoT products across a wide range of industries.
• Utilize ECAD tools to design electronic hardware Schematic and PCB layout.
• Follow industry-standard best practices for Signal Integrity, Power Integrity and EMI mitigation.
• Take detail measurements of hardware using electrical measurement tool including but not limited to multi-meters, oscilloscopes and power analysers to assess circuit performance and design improvements.
• Demonstrate problem-solving skills in PCBA troubleshooting of typical issues encountered within the product development cycle.
• Collaborate with a team of other digital, analogue, firmware, software and mechanical design engineers to review and improve hardware designs.
• Maintain hardware design and development documentation and ensure successful production releases.

Requirements:

• Bachelor Degree in Electronics/Mechatronics Engineering or other equivalent engineering disciplines.
• Min 2 year experiences in IoT and Embedded System hardware design and development.
• Experience in using Altium Designer or other equivalent ECAD tools.
• Work independently with minimum supervision.

Perks & Benefits

• Good Career Advancement & Training Opportunities.
• Excellent Benefits - Medical, Dental, Optical, Insurance.

主要責任：

• 為各行各業的物聯網產品設計和開發電子硬體。
• 利用ECAD工具設計電子硬體原理圖和PCB佈局。
• 遵循訊號完整性、電源完整性和 EMI 緩解的業界標準最佳實務。
• 使用電氣測量工具（包括但不限於萬用電表、示波器和功率分析儀）對硬體進行詳細測量，以評估電路性能和設計改進。
• 展示解決產品開發週期中遇到的典型問題的 PCBA 故障排除技巧。
• 與其他數位、類比、韌體、軟體和機械設計工程師團隊合作，審查和改進硬體設計。
• 維護硬體設計和開發文件並確保成功的生產發布。

要求：

• 電子/機電工程或其他同等工程學科學士學位。
• 至少 2 年物聯網和嵌入式系統硬體設計和開發經驗。
• 具有使用 Altium Designer 或其他等效 ECAD 工具的經驗。
• 在最少的監督下獨立工作。

津貼和福利

• 良好的職業發展和培訓機會。
• 卓越的福利 - 醫療、牙科、光學、保險。

職責：

• 監督和指導建設項目從構思到完成。
• 深入審查專案以安排可交付成果。
• 管理所有現場和場外施工，以監控建築和安全法規的遵守情況。
• 協調和指導建築工人和分包商。
• 選擇工具、材料和設備並追蹤庫存。
• 滿足合約履行條件。
• 每天回顧工作進度。
• 編制有關工作狀態的內部和外部報告。
• 提前規劃以預防問題並解決任何新出現的問題。
• 談判協議條款、起草合約並取得許可和執照。
• 分析、管理和減輕風險。
• 確保品質施工標準並使用正確的施工技術。

要求：

• 擁有豐富的施工管理工作經驗。
• 先進的施工管理流程、手段和方法知識。
• 對建築產品、施工細節以及相關規則、法規和品質標準有全面的了解。
• 熟悉施工過程的各個方面。
• 了解施工管理軟體包。
• 能夠規劃並看到「大局」。
• 擅長衝突和危機管理。
• 強大的領導能力和人力資源管理能力。
• 良好的時間和專案管理技能。
• 至少擁有施工管理、建築、工程或相關領域的學士學位。

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 休閒著裝要求
• 公司旅行
• 事假
• 開放文化

Responsibilities:

• Oversee and direct construction projects from conception to completion.
• Review the project in-depth to schedule deliverables.
• Manage all onsite and offsite constructions to monitor compliance with building and safety regulations.
• Coordinate and direct construction workers and subcontractors.
• Select tools, materials and equipment and track inventory.
• Meet contractual conditions of performance.
• Review the work progress on daily basis.
• Compile internal and external reports pertaining to job status.
• Plan ahead to prevent problems and resolve any emerging ones.
• Negotiate terms of agreements, draft contracts and obtain permits and licences.
• Analyse, manage and mitigate risks.
• Ensure quality construction standards and the use of proper construction techniques.

Requirements:

• Proven working experience in construction management.
• Advanced knowledge of construction management processes, means and methods.
• Thorough knowledge of building products, construction details and relevant rules, regulations and quality standards.
• Familiarity of all facets of the construction process.
• Understanding with construction management software packages.
• Ability to plan and see the 'big picture'.
• Competent in conflict and crisis management.
• Strong leadership and human resources management skills.
• Good time and project management skills.
• Possess at least a Bachelor's Degree in Construction Management, Architecture, Engineering or related field.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Company trips
• Personal leave
• Open culture

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

Key Responsibilities:

- Design and development of mechanical parts include plastic injection molding tray, machining pallet, jig, fixture for SSD drive manufacturing, including conceptualization, prototyping, testing, and implementation.

- Analyze and improve existing manufacturing processes and equipment for better performance, cost-efficiency, and reliability.

- Collaborate with cross-functional teams, including production, quality assurance, and R&D, to integrate new technologies and methodologies into the manufacturing process.

- Conduct thorough risk assessments for equipment designs and processes, implementing preventive measures to minimize downtime and ensure safety.

- Manage equipment development projects, ensuring they meet timelines, budget constraints, and quality standards.

- Stay abreast of the latest trends and advancements in mechanical engineering and SSD manufacturing technology, incorporating innovative solutions into our operations.

- Provide technical guidance and mentorship to junior engineers and technicians.

Job Responsibilities:

1. Work and lead junior engineer towards projects delivery with other layout and circuit design engineers to resolve any technical issues that will affect layout to ensure high quality.
2. Utilize EDA tools (Cadence and Synopsys) for layout design and all related verification items, perform all layout activities as cell and block level creation, edit and full verification.
3. Use state-of-the-art layout techniques for matching, ESD, latch-up prevention and parasitic reduction and work with an awareness and understanding of the process from physical point of view.
4. Attending all relevant project meetings, continuous assessment and reporting of timescale risks.
5. Where possible, use schematic driven layout and consider top level auto routing.
6.  Involve in review session and prepare all related document and data preparation for wafer tape out.

Job Responsibilities:

1. Work and lead junior engineer towards projects delivery with other layout and circuit design engineers to resolve any technical issues that will affect layout to ensure high quality.
2. Utilize EDA tools (Cadence and Synopsys) for layout design and all related verification items, perform all layout activities as cell and block level creation, edit and full verification.
3. Use state-of-the-art layout techniques for matching, ESD, latch-up prevention and parasitic reduction and work with an awareness and understanding of the process from physical point of view.
4. Attending all relevant project meetings, continuous assessment and reporting of timescale risks.
5. Where possible, use schematic driven layout and consider top level auto routing.
6.  Involve in review session and prepare all related document and data preparation for wafer tape out.

We are looking for people who take initiative and ownership in their work. As part of our team, you will be responsible for planning and implementing innovative test strategies and trimming procedures for MEMS-based sensors.

We seek individuals who can think outside the box and contribute creatively to our projects. You will have the opportunity to develop and optimize test concepts and programs for testing, characterization, and customer samples. Your understanding of system functionality, testability, and product quality will be invaluable as you collaborate within our development team.

Driving innovation is at the core of what we do. You will have the autonomy to independently create and design test strategies, working closely with MEMS Development. Additionally, you will take charge of the technical conception, development, and setup of laboratory facilities within the fab.

Reliability is key in our team members. You will coordinate module-specific measurement technology development in collaboration with advanced engineering, various development departments, and production. This includes meticulous tracking of time schedules and costs.

Lastly, we expect our team members to effectively delegate tasks. You will assign hardware and software development tasks to both external service providers and internal colleagues. Managing the workflow and ensuring accountability for results will be crucial in this role.

Responsibilities:

• Optimize or design new production processes in cooperation with product engineers, to enable product quality and yield.
• Debug and add new features to internally developped measurement software for the laboratory in C++ or C#.
• Enable testing new production methods and product variants in the laboratory.
• Create documentation of the production processes and support their implementation.
• Collaborate with colleagues in multiple locations and domains on a daily basis.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• HAMR (CE) program development in Penang
• Manufacturing improvement projects
• Product improvement iteration qualification

Regular

• Ensure new product/process transfer from GO to Penang and develop with good process control and good reliability performance
• HAMR (CE) program development to meet the performance requirement from HDD.
• Establish unique process HAMR from NPI to mass production, throughput improvement, cost reduction, yield improvement and utilization improvement projects, & ensure no compromise in term of product quality.
• Correspond to process design change iteration for performance improvement, this includes process optimization and tribology qualification.
• Provide general guidance to sputter ME yield/process team on Magnetic & Interface related process/yield issues

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis sure

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• HAMR (CE) program development in Penang
• Manufacturing improvement projects
• Product improvement iteration qualification

Regular

• Ensure new product/process transfer from GO to Penang and develop with good process control and good reliability performance
• HAMR (CE) program development to meet the performance requirement from HDD.
• Establish unique process HAMR from NPI to mass production, throughput improvement, cost reduction, yield improvement and utilization improvement projects, & ensure no compromise in term of product quality.
• Correspond to process design change iteration for performance improvement, this includes process optimization and tribology qualification.
• Provide general guidance to sputter ME yield/process team on Magnetic & Interface related process/yield issues

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis sure