Total 1,240 quality control engineer job vacancies in MY Penang Bukit Minyak H1A

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Job Duties / Requirements:

• Full Time 3 position available.
• Candidate must posses at least Professional Certificates, Diploma graduates in Automotive/Mechanical Engineering or equivalent.
• At least 3 years work experience in the related field.  However, fresh graduate also encourage to apply.
• Proficient in CAD drawing, knowledge in computer software and hardware equipment, and familiar with various measuring tools and equipment.
• Ability to planning, communication, coordination, analytical, judgment, organization as well as implementing in various tasks.
• Communication skills : Chinese and English
• Participate in feasibility assessment of new product development.
• Prepare APQP materials and guide the output of relevant unit data in a timely manner.
• Convene new product development meetings as planned, report the meeting contents and the resolutions, and organize meeting minutes,
• Record and send to relevant units, track the results and ensure implementation as planned.
• Responsible for real-time control of supplier's parts/mold progress and problem points.
• Make test samples, issue test orders and track test progress and results.
• Purchase and manage the materials required for new product samples, conduct trial production analysis of the materials, propose problem-solving countermeasures, and follow up on implementation.
• Track the progress of new product molding, inspection, new fixture production, modification, etc. and confirm compliance.
• Follow up on the OEM's trial assembly progress and problem points, propose solutions and provide feedback and track the results of problem-solving.
• Submit PPAP related information, samples, etc., and perform preparations before mass production.
• Prepare weekly and monthly reports and operating report materials.
• Prepare product budget and control budget execution.
• Responsible for on-site trial production of each changed part and submission of problem points.
• Complete other tasks may assigned by superior leaders from time to time.

Only shortlisted candidate will be notified.

Interested candidate are invited to apply online or email your detailed resume, expected salary directly to hr@gskm.com.my

Perks & Benefits

• 5 Working Days Hours (8:00am ~ 6:00pm)
• Company Uniform provided
• Travelling/Transport Allowance
• Meal/Attendance/Incentive Awards
• Bonus
• Company Trip / Team Building Activity

Job Responsibilities:

• Completes engineering projects by organizing and controlling project elements.
• Maintains project schedule by monitoring project progress, coordinating activities, and resolving problems.
• Controls project plan by reviewing design, specifications, and plan, scheduling changes, and recommending actions.

Requirements:

• Diploma, Bachelor and Master in Mechanical/Electrical/ Electronic/Construction or other related discipline required
• 1+ years of project experience working in the construction industry required
• Experience with facilities construction sites preferred

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Medical insurance

ROLES & RESPONSIBLITIES:

1) Assist in organize, plan, oversea and direct electrical projects for construction

2) Assist in perform and disseminate relevant information to various departments related to the project.

3) Assist in monitor project progress and maintain project schedule

4) Provide technical back-up service to the company which shall include develop project budget and track project costs according to contractual obligations and technical support to clients if required.
 

AUTHORITIES:      

1.     To fix technical problems reported by customer

2.     Perform routine preventive maintenance services at customer’s site

3.   To amend the drawings according to customer requirements

COMPETENCE REQUIREMENTS:

1) Work Experience : 3 years experience in handling site work

2) Professional Qualification : Diploma in Electronic / Electrical Engineering

3) Skills :-
a)    Able to communicate with sub-contractor and customer
b)    Troubleshooting and repair of electronic equipments

c)     Autocad, knowledge in drafting, basic measuring and design skills
d)    Able to work independently

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave

REQUIREMENTS

• ABILITY ON MATERIAL ORGANIZATION
• ABILITY TO SUPERVISE AND MANAGE SITE WORKER & SITE ISSUE
• PROFICIENCY IN COMPUTER - AIDED DRAFTING (CAD) SOFTWARE
• ABILITY TO DEAL WITH DIFFERENT PERSONALITIES AND REMAIN CALM
• ABILITY TO CARRY OUT ELECTRICAL DESIGN ACCORDING TO INDUSTRY STANDARDS
• WILLING TO TRAVEL

PERKS & BENEFITS

• KWSP, SOCSO & EIS IS PROVIDED
• TRAVELLING ALLOWANCE

WPG Malaysia is hiring a Field Applicantion Engineer.

Field Application Engineer (FAE) team’s objective is to provide first line technical 
support for the assigned product lines. Work closely with product marketing to meet assigned principals’ design win goals and objectives. Interact with customers’ R&D engineers to promote principals’ products and solutions. 

Duties and Responsibilities:- 

• Promote principals' focus products to the account base's R&D engineers for 
  design-in. 
• Work closely with sales and marketing, to fulfill expectations of the assigned 
  product lines, with regards to design-in and design-win activities. 
• Keep up to date on customer’s design activities, through regular contacts with 
  customers. 
• Keep abreast of the latest innovation of relevance to customers' product 
  focus, by attending relevant training, seminars and exhibitions. 
• Conduct training/technical seminars to promote principals' products. 
• Identify and cultivate potential new R&D accounts. 
• Support field sales on technical inquiries, product cross reference and 
  feedback quality issues to principals. 
• Identify and develop reference designs for the local market. 
• Any other related projects/duties which not indicated above will be assigned 
  by the superior from time to time. 

Requirements:- 

• Diploma / Degree in Electronic Engineering or equivalent. 
• Minimum 2-3 years R&D / Product Development and/or Field Applications engineering experience. 
• Proficiency in MS Powerpoint. 
• Strong electronic (Analog/Digital) background. 
• Effective communication skills, negotiation skills and presentation skills. 
• Willing to travel. 

Job Highlights

We provide a growing platform in terms of Site Experience,Grow Technical Improvement Guides & Skill Enhancement Training, Less Hierarchy Level, Less Office Politic. We are hiring for multiple work locations, do apply for further discussion. 

Job Description:

• Prepare Schedule for the flawless execution of assigned projects.
• Keeping the project on schedule, on budget and within the specifications.
• Develop costing for assigned tender with resourceful idea or proposal.
• Liase with supplier/ vendor/ contractors with acknowledgement of direct superior
• Ensure the material to be onsite as per target date
• Site coordination among consultant, client, supplier, vendor and contractor
• Communicate with client/ owner/ end use effectively with proper understanding by interpret their needs and requirement.
• Plan, coordinate and compile engineering design work with client/ designer/ consultant/ contractor
• Engineering drawing preparation
• Prepare site progress report as per project requirement.
• Prepare Method of Statement for the construction work
• Plan and arrange for testing and commissioning of the project to meet specification and requirement.
• Ensure all aspects of the project proceed while adhering to internal company
• SOPs as well as external regulations and laws
• Prepare handover documents once the project completion.

Job Requirements:

• Posses Degree certification in Electrical / Mechanical or Civil Engineering or equivalent
• Preferrable with 1-2 years of construction line working experience
• Have experience in project sites
• Able to work with minimum supervision

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan,
• Network Monitoring Systems (NMS), access points, firewalls, cyber security,
• Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma,
• Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Job Duties / Requirements:

• Full Time 3 position available.
• Candidate must posses at least Professional Certificates, Diploma graduates in Automotive/Mechanical Engineering or equivalent.
• At least 3 years work experience in the related field.  However, fresh graduate also encourage to apply.
• Proficient in CAD drawing, knowledge in computer software and hardware equipment, and familiar with various measuring tools and equipment.
• Ability to planning, communication, coordination, analytical, judgment, organization as well as implementing in various tasks.
• Communication skills : Chinese and English
• Participate in feasibility assessment of new product development.
• Prepare APQP materials and guide the output of relevant unit data in a timely manner.
• Convene new product development meetings as planned, report the meeting contents and the resolutions, and organize meeting minutes,
• Record and send to relevant units, track the results and ensure implementation as planned.
• Responsible for real-time control of supplier's parts/mold progress and problem points.
• Make test samples, issue test orders and track test progress and results.
• Purchase and manage the materials required for new product samples, conduct trial production analysis of the materials, propose problem-solving countermeasures, and follow up on implementation.
• Track the progress of new product molding, inspection, new fixture production, modification, etc. and confirm compliance.
• Follow up on the OEM's trial assembly progress and problem points, propose solutions and provide feedback and track the results of problem-solving.
• Submit PPAP related information, samples, etc., and perform preparations before mass production.
• Prepare weekly and monthly reports and operating report materials.
• Prepare product budget and control budget execution.
• Responsible for on-site trial production of each changed part and submission of problem points.
• Complete other tasks may assigned by superior leaders from time to time.

Only shortlisted candidate will be notified.

Interested candidate are invited to apply online or email your detailed resume, expected salary directly to hr@gskm.com.my

Perks & Benefits

• 5 Working Days Hours (8:00am ~ 6:00pm)
• Company Uniform provided
• Travelling/Transport Allowance
• Meal/Attendance/Incentive Awards
• Bonus
• Company Trip / Team Building Activity

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Responsibilities

• Responsible for overall sales activity throughout assigned market/ product range
• Good working relationship with existing customers and establish new contacts.
• Respond effectively and promptly to customer enquiries.
• Provide after sales technical and service supports to our customers.
• Ensure that quotations delivery schedules and forecasting inputs are followed up
• on in a timely and efficient manner.

Requirement

• Candidate must possess at least a Professional Certificate, Diploma,
• Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma,
• Professional Degree, Engineering or equivalent.
• Required language(s): Mandarin, English
• Possess own transport
• Fresh graduates / Entry level applicant are encouraged to apply.

Perks & Benefits

• Medical 

   

• Basis salary, commission, car allowance & etc.

• 5 working days ( Monday to Friday)

• Hospitalization benefits.

• Oversea training and Development opportunities.

角色和職責：

1) 協助組織、規劃、指導海外電力項目建設

2）協助執行並向專案相關各部門傳達相關訊息。

3）協助監控專案進度並維護專案進度

4) 為公司提供技術支援服務，其中包括根據合約義務制定專案預算並追蹤專案成本，並在需要時向客戶提供技術支援。

當局：

1、解決客戶反映的技術問題

2.在客戶現場進行日常預防性維護服務

3.根據客戶要求修改圖紙

能力要求：

1) 工作經驗：3年現場工作經驗

2) 專業資格：電子/電機工程文憑

3）技能：-
a) 能夠與分包商和客戶溝通
b) 電子設備故障排除與維修

c) Autocad、製圖知識、基本測量和設計技能
d) 能夠獨立工作

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 事假

工作職責：

• 透過組織和控制專案要素來完成工程專案。
• 透過監控專案進度、協調活動和解決問題來維護專案進度。
• 透過審查設計、規格和計劃、安排變更和建議行動來控制專案計劃。

要求：

• 需要機械/電氣/電子/建築或其他相關學科的文憑、學士和碩士學位
• 需1年以上建築業專案經驗
• 有設施施工現場經驗者優先

津貼和福利

• 津貼（旅費、交通費等）
• 附近的公共交通
• 醫療保險

工作職責/要求：

• 全職 3 個職位可供選擇。
• 候選人必須至少擁有汽車/機械工程專業證書、文憑畢業生或同等學歷。
• 至少3年相關領域的工作經驗。不過，也鼓勵應屆畢業生申請。
• 精通CAD繪圖，了解電腦軟體硬體設備，熟悉各種測量工具及設備。
• 具備在各項任務中的計劃、溝通、協調、分析、判斷、組織和實施的能力。
• 溝通能力：中文和英文
• 參與新產品開發的可行性評估。
• 及時準備APQP材料並指導相關單位資料的輸出。
• 依計畫召開新產品開發會議，報告會議內容及決議，整理會議紀錄；
• 記錄並發送給相關單位，追蹤結果並確保按計劃實施。
• 負責即時掌控供應商零件/模具進度及問題點。
• 製作測試樣品、發出測試訂單並追蹤測試進度和結果。
• 採購和管理新產品樣品所需材料，對材料進行試製分析，提出問題解決對策，並追蹤實作。
• 追蹤新產品成型、檢驗、新夾俱生產、改造等進度並確認符合性。
• 跟進整車廠試裝進度及問題點，提出解決方案並回饋，追蹤問題解決結果。
• 提交PPAP相關資料、樣品等，做好量產前的準備。
• 準備週報、月報和經營報告資料。
• 編制產品預算並控制預算執行。
• 負責各變更件的現場試製及問題點的提交。
• 完成上級領導不時交辦的其他任務。

只有入圍候選人才會收到通知。

有興趣的候選人請在線申請或將您的詳細簡歷、期望薪資直接發送至 hr@gskm.com.my

津貼和福利

• 5 個工作天（上午 8:00 ~ 下午 6:00）
• 提供公司製服
• 旅遊/交通津貼
• 膳食/出席/獎勵
• 獎金
• 公司旅行/團隊建立活動