Total 79,097 quality control engineer job vacancies in Malaysia

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Responsibilities: 

• Able to work beyond normal working hours when necessary.
• Implement effective maintenance procedures to minimize production down time caused by breakdown of machineries. 
• Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions. 
• Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance. 
• Implement effective preventive maintenance plan to ensure all facilities and equipment operate efficiently and effectively. 
• Initiate necessary modification and improvement to enhance machine efficiency. 
• Conduct studies and carry out analysis to ensure capacity of mechanical installations meet the needs of production. 
• Initiate immediate actions to recommend for improvement and upgrading when and where necessary. 
• Ensure all work requests are sufficiently and promptly fulfilled. 
• Assist in developing system and procedures to continuously enhance energy efficiency. 
• Conduct constant review on spare parts consumption and initiate necessary purchase of spare parts. 
• Analyse spare parts consumption and maintenance cost and initiate effective actions to reduce consumption and maintenance cost. 
• Monitor to ensure operation of utility supply and facilities comply with provision of relevant laws, by-laws, rules and regulations. 
• Plan constantly for proper upkeep and maintenance of building facilities. 
• Ensure continuous development and upgrading of subordinates’ skills. 
• Involve actively in cost savings or improvement projects. 
• To advise and guide maintenance supervisor in the implementation of effective 
  maintenance programs. 
• Provide proper guidance to subordinates to troubleshoot and overcome machine problems speedily and effectively. 
• To prepare monthly reports, capital expenditures and evaluate service providers.

Qualifications: 

• Minimum 3 years of relevant work experience in same field mechanical, electrical or industrial maintenance 
• Strong understanding of engineering principles and knowledge of equipment and machinery 
• Ability to analyse information, diagnose problems and develop solutions 
• Excellent communication and interpersonal skills 
• Strong time management and organisational skills 
• Ability to prioritise tasks and make decisions under pressure 
• Language required : English,Bahasa Malaysia, chinese 
• Minimum education level : certification level 

Responsibilities:

• To assist the Project Manager to monitor and supervise the construction works at the project site, to ensure it meets the requirements in term of cost, quality and time.
• To review construction drawings and carry out valued engineering.
• To co-ordinate with Authorities, Consultants and Sub-contractors.
• To prepare daily site reports and correspondence.
• To do site inspection to check on quality of works/progress of works/ defect inspection.
• To attend project site meeting to ensure project schedule is adhered to, problem and defects are attended to.

Requirements :

• Candidates must possess Degree/ Diploma in Building or Civil Engineering.
• Minimum 1-2 year working experience.
• Able to plan and lead sub-contractors on day-to day operation.
• Strong communication skills.
• Must be a team player, able to work hard and independently.

Perks & Benefits

• Commission and bonus
• Casual dress code

JOB RESPONSIBILITIES :

• To participate in planning, managing and implementing Electrical & ELV services for projects.
• To prepare Construction, Shop drawing & As built drawing for M&E System.
• To ensure works are done as per contract's specification.
• To assist pre-contract & tender division with tender support for Electrical & ELV services/project support.
• To coordinate, monitor and review construction work progress.
• To undertake all other duties and responsibilities as instructed.
• Inspection and reporting of installation works completed by Contractor.
• Ensuring all materials delivered to site conform with the approved specifications and Contract requirements.
• Identifying all outstanding work to be carried out timely to meet the timeline stipulated in the Contracts.
• Identifying potential problems and delay at site and report regularly to superiors on the progress of works.

JOB REQUIREMENTS :

• Candidate must possess at least Bachelor’s Degree or Professional Degree in Electrical Engineering or equivalent
• A minimum of 3-5 years working experience in related field is required
• Proficiency in MS Office, MS Project, AutoCAD
• Good in Bahasa Malaysia and English
• Good in Analysis, Design skills, Project Management and Procedures, Process Improvement, Technical Understanding, Documentation Skills, Safety Management and Supervision
• Required language(s): Mandarin, English, Bahasa Malaysia. Proficiency in Mandarin is preferred to interact with Mandarin-speaking stakeholder.
• Travel to the site is required as necessary and able to work outstation.

Perks & Benefits

• Medical Allowance
• Parking Subsidies
• EPF & Socso

This position can apply to Automation & Granulation & Extrusion & Plastic Injection & Assembly Workshop.

该职位开放给自动化、造粒车间、挤出车间、注塑车间、装配车间的申请。

Responsibilities

• Arrange reasonable manufacturing planning according to production orders and complete manufacturing tasks on time.
• Coordinate with other engineers, suppliers, and assembly teams to ensure machines meet OEE targets.
• Establish technical manuals, drawings, models, training documentation, preventative maintenance plans, and troubleshooting guides for newly established automated equipment/processes.
• Work with automation suppliers for design reviews, research, installation, and troubleshooting of parts.
• Examine the manufacturing management in the workshop and the implementation of the manufacturing technical documents.
• Responsible for coordinating new product pilot manufacturing.
• Responsible for the maintenance of mold and fixtures in the area of responsibility
• Participate in the trial production, testing, and review of new products, materials, and molds.
• Ensure records are adequately maintained, updated, and traceable per ISO 13485 requirements.
   

Requirements

• Prefer Mechanical Engineering/ Polymer Engineering or another related field.
• Ability to work independently and under pressure, good team spirit, strong interpersonal skills, adaptability, and good communication and presentation skills.
• Candidates fluent in Mandarin are preferred as the role requires the candidate to deal with Mandarin-speaking colleague
• Fresh Graduates are encouraged to apply!
   

Perks & Benefits

• On-the-job training will be provided
• Medical Benefits
• Incentive Allowance
• Seniority Reward
• Year-end salary adjustment
• Year-End Bonus
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Company trips
• Personal leave
• Open culture
• Personal development opportunities

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

Mob Date: 18/04/2024

Demob date: 09/05/2024

Duration: 3 weeks

Location: PFLNG2

Mob From: Kota Kinabalu

Responsibilities:

• Set up WirelessHART communication for multiple instruments using AMS TREX.

• Connect wireless UT sensors to the caliperay and repeaters and configure them for data transmission.

• Ensure antenna is installed with the optimal signal reception.
• Establish cable connections between antennas and the Emerson Gateway.
• Integrate the Gateway with the WirelessHART network.
• Together with the execution team for the installation and troubleshooting
• Ensuring compliance with specifications, codes or requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Ensuring all activities necessary to guarantee the design of a 'safe' plant are performed.
• To assist in troubleshooting electrical equipment failures and recommend solutions to avoid recurring issues.
• Submission UAUC Report. ( 1 UAUC per day)

CRITERIA

• Local Sabahan / Valid Sabah work permit
• OGSP
• Medical Offshore
• Bosiet
• CIDB
• Full dose of vaccination c/w booster
• WAH
• Related Certificates

Perks & Benefits

• Employee equity
• Casual dress code
• Open culture
• Personal development opportunities

This is a full-time role for a Sales Support Engineer, stationed in Kuala Lumpur, responsible for providing sales and technical support to customers, as well as preparing and delivering technical presentations. To  identify new opportunities of sales and marketing activities .Technical back groud with semiconductor knowledges preferred .

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Central location
• Casual dress code
• Personal leave

JOB RESPONSIBILITIES :

• To participate in planning, managing and implementing Electrical & ELV services for projects.
• To prepare Construction, Shop drawing & As built drawing for M&E System.
• To ensure works are done as per contract's specification.
• To assist pre-contract & tender division with tender support for Electrical & ELV services/project support.
• To coordinate, monitor and review construction work progress.
• To undertake all other duties and responsibilities as instructed.
• Inspection and reporting of installation works completed by Contractor.
• Ensuring all materials delivered to site conform with the approved specifications and Contract requirements.
• Identifying all outstanding work to be carried out timely to meet the timeline stipulated in the Contracts.
• Identifying potential problems and delay at site and report regularly to superiors on the progress of works.

JOB REQUIREMENTS :

• Candidate must possess at least Bachelor’s Degree or Professional Degree in Electrical Engineering or equivalent
• A minimum of 3-5 years working experience in related field is required
• Proficiency in MS Office, MS Project, AutoCAD
• Good in Bahasa Malaysia and English
• Good in Analysis, Design skills, Project Management and Procedures, Process Improvement, Technical Understanding, Documentation Skills, Safety Management and Supervision
• Required language(s): Mandarin, English, Bahasa Malaysia. Proficiency in Mandarin is preferred to interact with Mandarin-speaking stakeholder.
• Travel to the site is required as necessary and able to work outstation.

Perks & Benefits

• Medical Allowance
• Parking Subsidies
• EPF & Socso

Location : Johor, Kuala Lumpur and Penang Candidates Wanted 

Job Requirements

• Candidate must possess at least Diploma/Advanced/Higher/ Graduate Diploma in Engineering (Mechanical) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Willing to learn.
• Requires relevant semiconductor / mechanical / pcb industry experience
• Required language(s) : Chinese, English, Bahasa Malaysia.
• Preferable Chinese Speaking candidates.
• Fresh graduate are welcome to apply.
• Ambitious, Self-Motivated, Team Work and Independent.
• Coordinate and work with colleagues to meet and achieve target.
• Possess own transport and willing to travel.
• Able to start work immediately.
• Can work with minimum supervision.
• Have knowledge in machinery is an added advantage.
• Position available in Johor, Penang, Kuala Lumpur.
• Flexibility and willingness to travel frequently to assigned locations, including Kuala Lumpur, Penang, Singapore, and Indonesia.

Job Responsibility

• Provide on-site technical support to customers in various locations, including Kuala Lumpur, Penang, Singapore, Indonesia, and other assigned areas.
• Conduct technical training for the machines we sell to enhance understanding of product features and performance.
• Respond to service requests promptly, troubleshoot machine issues, and deliver effective solutions.
• Collaborate with the sales team, offering technical support to ensure customer satisfaction with our products.
• Maintain close communication with customers, building positive working relationships to foster customer loyalty.
• Attend to sales enquiry & achieve sales target.
• Gather and record customer feedback, providing product improvement suggestions to the research and development team.
• Participate in the development of maintenance plans to ensure optimal performance of equipment.
• Contribute to the expansion of our customer base by actively participating in efforts to acquire new clients.
• Complete reports assigned by the headquarters, including but not limited to detailed records on technical support, customer feedback, and sales trends.
• Provide quotations to customers and recommend suitable equipment based on their needs.
• Prepare and deliver technical proposals explaining products & services to customers.
• Purchase of spare parts or equipment.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Central location
• Casual dress code
• Company trips
• Work visa sponsorship
• Personal leave

Requirements : 

• Bachelor's degree in engineering or related field.
• Valid engineering license - CIDB or NIOSH.
• 2 years field and project planning experience.
• Proficiency in design and visualization software and excellent computer literacy.
• Ability to work with multiple discipline projects.
• Strong project management and leadership skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practises.
• Must posses own transport and be willing to travel. 

Job Responsibilities : 

• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Assign responsibilities and formulate project paramaters to the project team.
• Interact with clients to interpret their needs and requirements and represent them in the field .
• Perform quality control tasks and report on project status.
• Cooperate and communicate with project participants to maintain profitability and efficiency.
• Develope equipment specifications.
• Ensure compliance with applicable codes, practises, policies, standards, and specifications.
• Generate Gantt Chart, S-Curve, and Project Pipeline Schedule.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel, sports, transportation, etc.)
• Company trips
• Medical insurance
• Personal development opportunities

Purpose of Roles

Wrightbus is a fast-moving company which has experienced considerable growth in the last year. As part of this continued growth we are looking for an experienced Electrical Engineer to join our Electrical Engineering Design team. The successful candidate will have responsibility to support the further development of our Electrical Engineering Design, specifically planning and integration of the electrical control for bus body and chassis electrical systems with respect to hardware components, harnesses and panels.

JOB DESCRIPTION

• Support the NPD Strategy for EV, FCEV and HEV electrical control systems.
• Support the development of electric powertrain charging systems.
• Participate in the vehicle life cycle development through concept to engineering design, prototype build, certification, to Job 1
• Work effectively within a cross-functional team on the overall vehicle development
  Elicit external and internal stakeholder requirements for new product developments.
• Selection of electrical components and systems into new and existing vehicle designs ensuring products used meet required standards.
• Design and specification of electrical hardware components for the integration of vehicle subsystems, e.g. fuseboards, switchboxes.
• Liaise with suppliers and manage the progress to meet timing, specification, and engineering requirements
• Undertake the technical assessment and analysis of components and systems and develop optimal solutions to meet overall vehicle requirements.
• Design, and develop CAN communications systems and architecture.
• Design of low and high voltage control for bus body and chassis electrical systems,including wiring harnesses and electrical panels.
• Document, validate and provide FMEA for design reviews and NPD gateways.
• Creation of technical documentation with respect to the vehicle electrical system and installation eg. Wiring schematics, system schedules, harness drawings, electrical engineering standards and procedures.
• Provide and co-ordinate vehicle test plans and commissioning, testing and data logging of vehicle control systems.
• Provide Technical assistance to production, support engineers and the customer.
• Continued development of electrical system to improve ease of installation and to reduce the cost of manufacture.
• Co-ordinate with assembly and manufacturing teams to ensure that the assembly of the electrical system is correctly defined and implemented.
• Provide system technical information and documentation for both internal and external customers.
  
  

General Duties

• Undertake all duties in line with General Data Protection and maintain utmost level of confidentiality.
• Ensure work is completed to meet the requirements of the ISO 9001 standard.
• Ensure that you treat those with whom they come into contact in a courteous and respectful manner in accordance with the Dignity at Work Procedure.
• Wrightbus is committed to equality of opportunity and to selection based on merit. You are required to adhere to and promote the Equal Opportunities Policy throughout the course of your employment.
• You must maintain high standards of personal accountability.
• You must follow the training received when using any work items Wrightbus has provided.
• You must co-operate with others on health and safety and not interfere with, or misuse, anything provided for their health, safety, or welfare.
• You must take care of your own health and safety and that of people who may be affected by what you do (or do not do).
• Staying away from home on occasions will be necessary to meet the requirements of the roles
• Undertake any other duties or training conducive with efficient conduct of the post.

Note

This job description will be subject to review in the light of changing circumstances and may include other duties and responsibilities, as may be determined in consultation with the jobholder. It is not intended to be rigid and inflexible but should be regarded as providing guidelines within which the individual works.
Wrightbus is committed to equality of opportunity and to selection on merit.

Perks & Benefits

• Medical insurance
• Personal leave
• Personal development opportunities

Job Summary: 
As an Electrical Engineer, you'll play a pivotal role in designing, developing, and maintaining electrical systems and components. This position combines project management, technical expertise, and problem-solving skills to ensure the successful implementation of electrical projects. 

Key Responsibilities: 

1. Design and Development:

• Develop electrical systems and components by studying project requirements and applying engineering principles.
• Design electrical schematics, layouts, and specifications using computer-aided design (AUTO CAD) software. 

2. Project Management:

• Manage and coordinate electrical projects from conception to completion, ensuring compliance with specifications and codes.
• Develop project timelines, budgets, and resource requirements. 

3. Testing and Troubleshooting:

• Conduct testing and verification of electrical systems to ensure performance and reliability.
• Identify and resolve technical issues through troubleshooting and root cause analysis. 

4. Compliance and Standards:

• Ensure compliance with national and international electrical codes, standards, and regulations.
• Stay updated on industry trends and incorporate the latest technologies into designs. 

5. Collaboration:

• Collaborate with multidisciplinary teams, including engineers, architects, and project managers.
• Communicate effectively with clients and stakeholders to understand project requirements. 

6. Documentation:

• Create and maintain comprehensive project documentation, including design specifications and technical manuals.
• Prepare and review engineering drawings, plans, and specifications. 

7. Cost Estimation:

• Prepare cost estimates for electrical projects, monitoring project costs and identifying cost-saving opportunities. 

8. Continuous Improvement:

• Identify opportunities for process improvements and innovation in electrical design and implementation.
• Participate in professional development activities to stay current with industry trends.

Qualifications:

• Bachelor's degree / Diploma / Certificate in Electrical Engineering or a related field.
• Professional Engineer (PE) license is desirable.
• Proven experience in electrical engineering, preferably in project management roles.
• Proficiency in computer-aided design (CAD) software and relevant engineering tools.
• Strong analytical and problem-solving skills.
• Excellent communication and interpersonal skills.
• Ability to work independently and collaboratively in a team environment.
• Knowledge of electrical codes, standards, and regulations.

• Excellent Salary Compensation
• Work Life Balance
• Outstanding career growth & development opportunities

Able to work in site at Rawang, Selangor 

Preferably someone with high rise building expereince

• Preparing, scheduling, coordinating, and monitoring of assigned engineering projects.
• Manage compliance with standards and specifications for quality control and assurance.
• Identify and solve issues that arise at project sites.
• Oversee budgetary, scheduling, and project databases, and report regularly to project manager on progress.
• Review project proposals and plans to develop project objectives.
• Developing specifications for the project's needed equipment.
• Collect and analyze project information to create status reports and recommend future actions.
• Responsible for the preparation of Progress Claim, Variation Order, Final Account promptly and accurately. 
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Monitor project progress, conduct inspections at site and provide regular project status reports to Management. 
• To assist Project Manager in general operation required in order to run the project smoothly.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code

Responsibilities:

• To provide engineering support for production operation in addressing any product quality issues and process quality issues.
• To continuously analyse product or equipment specifications and performance requirements for process improvement activities such as mould design, process design, and equipment design.
• To participate in cross functional team that design, fabricates, tests and review new product and existing product.
• To review and ensure proper control of documentation for existing and new product or engineering change (ECO/PCN) and conduct proper handover training for production.
• To support New Product Introduction (NPI).
• To coordinate entire process and product flow from development stage (FA) to mass production.
• To plan and organize resources for all projects to ensure that it is being effectively executed.
• To prepare, compile and analyse design test data to establish performance standards for new product and/or existing modified product.
• To review and finalise control plan related to casting processes and any other documents/samples prior to customer submission.
• Support in any additional task as and when required by the superior.

Requirements:

• Degree in Industrial, Mechanical, Materials or Metallurgical Engineering or equivalent.
• Min 3 years’ experience in die-casting or similar industry.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities