Total 7 maintenance job vacancies in Quality Assurance / Control category in Malaysia

Job Description

Are you looking for an exciting opportunity with a rapidly growing pharmaceutical manufacturer? If so, then this is the opportunity for you!

Primary Responsibilities

• Design, assembly, installation, adjustment, testing, cleaning, calibration, maintenance, repair and troubleshooting of plant instrumentation, electrical and electronic systems such as controllers, transmitters, indicators, plant and laboratory analyzers, and weighing systems

• Perform ongoing maintenance of aseptic/clean room and bulk chemical areas

• Follow complex instructions for completion of job tasks

• Complete written documentation of work performed

• Flexible schedule required to support various maintenance activities

• Follow prescribed safety and environmental rules and regulations and maintain high quality standards of work

• Compliance with current good manufacturing procedures(cGMP), safety and environmental requirements/regulations/guidelines

• Candidate will be required to qualify in the Mechanic Craft by on-the-job performance, practical skills assessment and testing

Education Minimum Requirements

• High School Diploma or GED

• A journey person's card with a minimum of 42 month apprenticeship rating as a Control Tech OR a two or four year degree in instrumentation, electrical or electronics, OR military experience working in the areas of Instrumentation, Electrical, or Electronics within the last six years

Required Work Experience and Skills

• Four years of industrial experience OR equivalent military experience working in the areas of Instrumentation, Electrical, or Electronics, within the last six years

• Practical knowledge on the operation/use of general hand and power tools, instruments and testing apparatus common to the electrical, electronic and instrumentation fields

• Ability to read P&ID's, electrical drawings, blueprints, PLC ladder logic, etc.

• Must have knowledge installing, repairing and maintaining instrumentation, automation, electronic, single phase and all aspects of 3-phase electrical equipment throughout a manufacturing environment

• Effective calibration/troubleshooting skills

• Ability to communicate both in writing and verbally and work in a highly effective team environment

• Ability to manage multiple priorities and advance several tasks in parallel

• Demonstrated mechanical aptitude

Preferred Experience and Skills

• A current level one, two or three CCST designation from ISA

• Experience in aseptic or GMP/regulated and bulk chemical manufacturing environment

• Ability to work with and troubleshoot computer control equipment, including Programmable Logic Controllers (PLCs) and Distributed Control Systems (DCS)

• Experience in troubleshooting and programming VFDs (Variable Frequency Drives)

• Experience in electrical distributions systems with voltages greater than 600VAC

• Knowledge of SAP

Shift

• 12 hour shift rotation that involves working every other weekend

• Flexible schedule is required to support various maintenance activities at times

MMDHJ

VETJOBS

NOTICE FOR INTERNAL APPLICANTS

In accordance with Managers' Policy - Job Posting and Employee Placement, all employees subject to this policy are required to have a minimum of twelve (12) months of service in current position prior to applying for open positions.

If you have been offered a separation benefits package, but have not yet reached your separation date and are offered a position within the salary and geographical parameters as set forth in the Summary Plan Description (SPD) of your separation package, then you are no longer eligible for your separation benefits package. To discuss in more detail, please contact your HRBP or Talent Acquisition Advisor.

Employees working in roles that the Company determines require routine collaboration with external stakeholders, such as customer-facing commercial, or research-based roles, will be expected to comply not only with Company policy but also with policies established by such external stakeholders (for example, a requirement to be vaccinated against COVID-19 in order to access a facility or meet with stakeholders).  Please understand that, as permitted by applicable law, if you have not been vaccinated against COVID-19 and an essential function of your job is to call on external stakeholders who require vaccination to enter their premises or engage in face-to-face meetings, then your employment may pose an undue burden to business operations, in which case you may not be offered employment, or your employment could be terminated. Please also note that, where permitted by applicable law, the Company reserves the right to require COVID-19 vaccinations for positions, such as in Global Employee Health, where the Company determines in its discretion that the nature of the role presents an increased risk of disease transmission.

Current Employees apply HERE

Current Contingent Workers apply HERE

US and Puerto Rico Residents Only:

Our company is committed to inclusion, ensuring that candidates can engage in a hiring process that exhibits their true capabilities. Please click here if you need an accommodation during the application or hiring process.

We are an Equal Opportunity Employer, committed to fostering an inclusive and diverse workplace.  All qualified applicants will receive consideration for employment without regard to race, color, age, religion, sex, sexual orientation, gender identity, national origin, protected veteran status, or disability status, or other applicable legally protected characteristics.  For more information about personal rights under the U.S. Equal Opportunity Employment laws, visit:

EEOC Know Your Rights

EEOC GINA Supplement​

Pay Transparency Nondiscrimination

We are proud to be a company that embraces the value of bringing diverse, talented, and committed people together. The fastest way to breakthrough innovation is when diverse ideas come together in an inclusive environment. We encourage our colleagues to respectfully challenge one another’s thinking and approach problems collectively.

Learn more about your rights, including under California, Colorado and other US State Acts

U.S. Hybrid Work Model

Effective September 5, 2023, employees in office-based positions in the U.S. will be working a Hybrid work consisting of three total days on-site per week, generally Tuesday, Wednesday and either Monday or Thursday, although the specific days may vary by site or organization, with Friday designated as a remote-working day, unless business critical tasks require an on-site presence.  This Hybrid work model does not apply to, and daily in-person attendance is required for, field-based positions; facility-based, manufacturing-based, or research-based positions where the work to be performed is located at a Company site; positions covered by a collective-bargaining agreement (unless the agreement provides for hybrid work); or any other position for which the Company has determined the job requirements cannot be reasonably met working remotely. Please note, this Hybrid work model guidance also does not apply to roles that have been designated as “remote”.

Search Firm Representatives Please Read Carefully 
Merck & Co., Inc., Rahway, NJ, USA, also known as Merck Sharp & Dohme LLC, Rahway, NJ, USA, does not accept unsolicited assistance from search firms for employment opportunities. All CVs / resumes submitted by search firms to any employee at our company without a valid written search agreement in place for this position will be deemed the sole property of our company.  No fee will be paid in the event a candidate is hired by our company as a result of an agency referral where no pre-existing agreement is in place. Where agency agreements are in place, introductions are position specific. Please, no phone calls or emails. 

Employee Status:

Regular

Relocation:

No relocation

VISA Sponsorship:

No

Travel Requirements:

No Travel Required

Flexible Work Arrangements:

Not Applicable

Shift:

1st - Day, 3rd - Night

Valid Driving License:

Hazardous Material(s):

Title:

APS-3: Quality Control Inspector I - Maintenance

KBR Government Solutions delivers full life cycle professional and technical solutions that improve operational readiness and drive innovation. Our solutions help ensure mission success on land, air, sea, space and cyberspace for the Department of Defense, intelligence community, NASA, and other federal agencies. KBR’s areas of expertise include engineering, logistics, operations, science, program management, mission IT and cybersecurity.

KBR maintains and manages Army prepositioned stocks at the Army Field Support Battalion - Charleston (AFSBn-CHS) land site and aboard ship to include all logistics and maintenance operations. The KBR APS-3 Program is managed and executed at Goose Creek in support of the Army’s power projection doctrine and resources.  The contract provides maintenance of APS-3 stocks (Class II, IIIP, IV, VII, IX) to ensure that unit sets stored aboard marine vessels are configured and maintained at optimal readiness. KBR provides limited maintenance and supply support aboard ship to ensure that equipment sets are maintained in a ready condition for emergency download and issue to operating units at the direction of the US Army. KBR also provides maintenance services and logistical support for other Army programs IAW individual scope of work contract requirements.

This inspector implements quality control and safety plans to ensure compliance with contract specifications and applicable regulations, verifies all phases of a variety of goods, services or operation for conformity to established quality, health and safety, and other operational standards by performing on-going work for compliance with contractual provisions; ensures all services listed on the performance requirement summary are performed in a satisfactory manner, specifies areas to be inspected (scheduled and unscheduled) and how often inspections will be accomplished, communicates deficiencies to proper persons, maintains Quality Control files, and documents results of all inspections.

Roles and Responsibilities

• The Quality Control Inspector 1 (Maintenance) is responsible for quality control of the maintenance process, as outlined in the Performance Work Statement (PWS), to include all applicable PWS requirements and Army regulations. This encompasses verifying inspections, repairs and services are in accordance with Technical Manual (TM) requirements and specifications, verification of shop level maintenance supply processes are followed (correct parts ordered / parts accountability / unserviceable recoverable and serviceable excess turn-in), records (both paper and electronic system of record) are complete and correct, function and load tests have been completed and passed, and the equipment and supporting records will successfully pass inspection by the government. This inspector participates in final presentation of equipment and documentation to the Government unless directed otherwise by Shop or Quality Management. The QCI 1 will also be responsible to monitor storage, use and disposal of hazardous materials, ensure facility safety compliance and adherence to documented safety processes. Verification techniques and methods consist of but are not limited to visual inspections of equipment, facilities, storage locations and documentation, diagnostic analysis, troubleshooting, vehicle operations, component testing, and utilization of calibrated test equipment.

• This inspector champions continuous improvement principles and practices and enforces department and program policies and procedures; will assist in providing statistical data, trend analysis data and current equipment technical data updates to ensure accurate resources are determined in preparation for assigned missions; assists team leads and foremen with coaching and training team members in proper techniques and expected results based on verification inspection trends and observations; provides guidance and recommendations to management, supervisors, leads and employees in regard to meeting quality and safety standards; communicates clearly orally and in writing and works well with all employees and customers to ensure correct information flows consistently.

• This inspector will verify the work of Automotive Workers, Motor Vehicle Mechanics, Warehouse Specialists, Material Coordinators, Heavy Equipment Mechanics, and Supply Technicians along with providing support to employees in Equipment Records and Parts Specialist (ERPS) skill sets.

Basic Qualifications (Required Education, Experience, Skills, and Certifications)

•  Four years directly related work experience with Military Maintenance and/or Logistics and Unit Supply Systems OR certificate of training from vocational school or other recognized source with a major study in automotive maintenance, automotive technology, Logistics, Warehouse Management or other related field and four years directly related private sector work experience.

• In lieu of formal course work, a combination of college credits, ASE Certifications, on-the-job training, other formalized training, or experience may be considered.

• Basic knowledge of diesel engine and drivetrain fundamentals and electrical troubleshooting.

• Must have a demonstrated knowledge of GCSS-Army to include exporting of reports.

• Must have a demonstrated knowledge of unit level maintenance supply, to include the recoverable part process, condition codes and turn-in procedures.

• Must have knowledge of MMIS (Modification management Information System) and be able to access it to verify reporting of completed safety messages and MWOs.

• Knowledge of Military technical manuals and regulations.

• Possess a valid State Motor Vehicle Operator License.

• Must be able to obtain and maintain Common Access Card (CAC) requirements.

• Must be able to obtain and maintain local base access.

Preferred Qualifications (Preferred Education, Experience, Skills, and Certifications)

• Military background is preferred.

• Good computer skills including Microsoft Excel and Word.

• Good oral and written communication skills.

• Previous or current CAC card holder preferred.

Work schedule:  Monday - Thursday, 6:30am - 5:00pm (OT/weekends as required during ship cycle).
 

Physical Requirements:

• Must be able to stand - between 2 to 3 hours per day.

• Must be able to walk - between 4 to 5 hours per day.

• Must be able to Lift - up to 35 lbs. – 50 lbs. periodically.

• Must be able to squat, knell, bend, reach and climb periodically.

• Must be able to work outside and inside in non-climate-controlled environments.

THIS IS NOT A REMOTE ROLE. NO PER DIEM, NO UPLIFT, NO RELOCATION AVAILABLE.

INCLUSION AND DIVERSITY AT KBR

At KBR, we are passionate about our people, sustainability, and our Zero Harm culture.

These inform all that we do and are at the heart of our commitment to and ongoing journey toward being a more inclusive and diverse company. That commitment is central to our team of teams philosophy and fosters an environment of real collaboration across cultures and locations. Our individual differences and perspectives bring enhanced value to our teams and help us develop solutions for the most challenging problems. We understand that by embracing those differences and working together, we are more innovative, more resilient, and safer.

We Deliver – Together.

KBR is an equal opportunity employer. All qualified applicants will receive consideration for employment without regard to race, color, religion, disability, sex, sexual orientation, gender identity or expression, age, national origin, veteran status, genetic information, union status and/or beliefs, or any other characteristic protected by federal, state, or local law.

Job Description:

The Role :

Airbus Protect supports the Airbus Commercial Aircraft Integration
Tests team in Filton. The main tasks to be performed for this position
are:

• Act as a Maintenance Focal Point for the Filton test benches, capturing new requirements and working towards continual improvement with the aim to reduce outstanding technical issues

• Providing Architecture Design Solutions/ Electrical Component electrical schematics and understanding the language behind it to meet the Requirements of the test bench

• Assessing modification requirements from design office/test team and developing a suitable solution

• Updating or creating new wiring diagrams and wiring lists

• Liaising with the onsite team or external supplier to implement/build the solution

• Supporting the test benches by troubleshooting electrical issues and investigate the issue and develop a solution

• Support the testers in carrying out certain tests with diagnostic equipment e.g., oscilloscopes, DVM's, ARINC 429 test boxes, etc.

• Manage the re-commissioning of the test rig following any maintenance/modification.

• Ensure that technical documentation is updated/created and correct following maintenance or modification

Experience required:

• You have a university degree in Aerospace / Electrical Engineering

• You have at least 3 years of working experience in the field of Test means, Lab/Ground Testing or Test engineering

• You have good knowledge and/or experience with the following :

• Microsoft Visio

• Working with test rigs 

• Understanding of Electrical Design (ESSENTIAL) and Electrical Systems (Minimum basic electronic circuit design knowledge using relay logic, diodes, resistors, capacitors) 

• Autonomy to produce electrical and mechanical drawings, electrical schematics,

• Analysis of System performance, test reporting and investigations

• Definition of Instrumentation systems

• Knowledge of AutoCAD Electrical & Ki CAD, Schaeffer Front Panel Designer Software is a plus

• Skills in Analysing Computer based systems behaviours (Python, C++, Matlab, Labview, Databases) would also be a plus

• This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success.

We need someone who has/is:

• You are autonomous, curious, proactive, rigorous, with great attention to detail,

• You know how to adapt to different situations, and you are very structured and organised,

• Team player, keen to share their knowledge and work collaboratively within a fairly small team,

• You are proactive and can identify solutions to problems,

• You have very good communication skills both written and verbal communication and are able to communicate in a concise way,

• Fluent in English (verbal and written).

What’s in it for you…

Joining Airbus Protect with :

• A close and caring management

• A dynamic work environment and innovative projects

• A career path adapted to your aspirations

• A community of recognised experts

• An opportunity to get involved in Corporate Social Responsibility (C.S.R.) projects

• A complete training catalogue

​

Great benefits: 

• 25 days holiday

• Hybrid working

• Flexi time

• Option to purchase holidays

• Generous pension scheme

• Eligibility to a Company profit sharing scheme

• Share options

• Access to a benefits platform offering car leasing, family health plans, dental plan, shopping discounts and much more … 

​AIRBUS PROTECT

Airbus PROTECT brings together experts in risk analysis and management in the fields of safety, cybersecurity and sustainability. We deliver expertise to our own group, Airbus, for whom we act as a privileged partner, but also to external clients.

With over 1,600 experienced professionals based in France, UK and Germany, we service large-scale contracts with companies such as critical infrastructures (CNI), other industries and public institutions. 

Our positioning and strategy enable us to meet the highest standards of the market and to meet the challenges of tomorrow as a team...

Join the AIRBUS PROTECT journey...

#JobAPUK

#BUSafetyAP

#2to5YearsExp, #6to10YearsExp, #Over10YearsExp

This job requires an awareness of any potential compliance risks and a commitment to act with integrity, as the foundation for the Company’s success, reputation and sustainable growth.

Company:

Airbus Protect Limited

Contract Type:

Permanent

Experience Level:

Professional

Job Family:

Testing <JF-EN-ET>

By submitting your CV or application you are consenting to Airbus using and storing information about you for monitoring purposes relating to your application or future employment. This information will only be used by Airbus.
Airbus is committed to achieving workforce diversity and creating an inclusive working environment. We welcome all applications irrespective of social and cultural background, age, gender, disability, sexual orientation or religious belief.

Airbus is, and always has been, committed to equal opportunities for all. As such, we will never ask for any type of monetary exchange in the frame of a recruitment process. Any impersonation of Airbus to do so should be reported to emsom@airbus.com.

At Airbus, we support you to work, connect and collaborate more easily and flexibly. Wherever possible, we foster flexible working arrangements to stimulate innovative thinking.

Job Description & Requirements

Our Quality group ensures every single material inside our products is manufactured, processed, tested, packaged, stored and distributed aligned with our incredibly high standards of quality and meets all regulatory requirements. Partnering across our internal manufacturing facilities, external contract manufacturers and suppliers we create an interdependent global manufacturing network committed to deliver a compliant, reliable supply to customers and patients on time, every time, across the globe.

What will you do

• Responsible for planning, scheduling and performing calibration, maintenance and qualification of laboratory equipment.
• Responsible for maintaining laboratory chemicals and consumables inventories and disposals.
• Responsible for archival/retrieval of retention samples.
• Ensure laboratory equipment calibration, maintenance and qualification within timely manner and in compliance to standard operating procedures with necessary laboratory safety precautions.
• Liaise and coordinate with external service providers in carrying out calibration, maintenance and qualification of laboratory equipment and tools.
• Liaise with external vendors to ensure chemicals and consumables supply continuity.
• Support laboratory investigation on laboratory equipment failure, Out of Tolerance and Out of Specification
• Be the subject matter expert of laboratory maintenance and participate as auditee in site internal audit/external audit.
• Coordinate with laboratory team to ensure equipment availability for calibration, maintenance and troubleshooting work.
• Manage archival/retrieval of record for laboratory calibration, maintenance and qualification related documents.
• Understand customer needs and identifies solutions to non-standard requests by interpreting existing procedures, processes and practices.
• Ensure work and behave in accordance with EHS procedures and guidelines.
• Maintains positive working relationships among employees and fosters an environment where employee engagement, empowerment, teamwork and accountability are the cultural norm.
• Participate in continuous improvement initiative as part of the production system culture in Singapore.
• Participate in EHS, Business Compliance, cGMP and all other compliance-related matters, where applicable.
• Uses formal data based analytical tools (such as Lean Six Sigma process) to identify and implement operating improvement opportunities to eliminate waste, improving accuracy, compliance and productivity.
• Any other duties as assigned by the Senior Manager/Director.

What you must have

To be successful in this role, you will have:

QUALIFICATION:

Bachelor Degree in Science/ Life Science, Pharmacy, Pharmaceutical Science or Engineering or proven relevant experience.

EXPERIENCE:

This is a career conversion programme under Workforce Singapore (WSG) and candidates must meet the following criteria:

• Singaporeans/Singapore PRs only
• PMETs/Mid-Careerist with no prior work experience in Biopharma industry are welcomed to apply
• Open to two years contract
• Minimum 2 years of relevant experience in GMP manufacturing environment, preferably laboratory operations.

QUALIFICATION:

Bachelor Degree in Science/ Life Science, Pharmacy, Pharmaceutical Science or Engineering or proven relevant experience.

Expertise, Professional and Functional Competencies

· A continued improvement mindset.

· Good knowledge and understanding of GMP

· To be familiar with simple statistic to apply statistical analysis and process control techniques.

· Experience in MS-office applications.

· Proficient in English.

Other Personal Attributes:

· Good organization and time management skills.

· Able to work independently.

· Meticulous with high integrity.

· Good interpersonal and communication skills, with ability to work in cross-functional teams.

· Continuous improvement mindset.

· Positive attitude and self-motivated.

The individual shall report to the Site Manager for the project.

You shall be responsible for the preparation, not limited to, of the Project Quality Plan, ITP, Quality Procedures, Inspection Dossiers, Test Certificates and carrying out stage-wise and final inspection activities.

Your key responsibility is to ensure professional quality control and assurance for the delivery of works in excellent quality in compliance with the client’s requirements.

You shall co-ordinate with project team for all the works requiring your QC expertise/technical support for the works to be carried out effectively and as per specifications.

You shall support the Site Manager in the clearance of certain vendors and NDT contractors (if sourced out).

You shall support in the supervision of works such as fabrication, construction, welding, mechanical, piping and structural installations

You shall randomly check the essential parameters as per the WPS requirements and Quality Procedures, witness PT, MPI, UT, Hardness testing and any other activities requiring your expertise

You shall prepare Stage Inspection Reports as per ITP.

You shall lead the team to co-ordinate Plan and execute NDE works as per requirements and monitor the backing system for welding consumables, pre-heating and inter-pass temperature of Welds

You shall carry out post-test requirements on, but limited to, Bolt, nut, Gaskets and Bolt tightening or torque as per approved procedures, check that the line is complete and ready for test and prepare a punch list of outstanding items.

Ensure final document preparation & review and sign off of all relevant project documents, coordinate with client for the submission of documents as per client requirements.

Customer service oriented mindset

Relevant experience in the Petrol-Chemical Industry

Possess a Bachelor’s degree in Engineering (Mechanical) and/or Sciences

Possess certifications in Non-destructive testing systems / various types of welding / QA/QC certifications, audit compliances and certificates

Relevant experience in welding, NDT methods, total quality management and process

If you have Test Maintenance Engineering experience and you're seeking a new position in Warwickshire, we want to hear from you. Jonathan Lee Recruitment is helping a collaborative company recruit a Test Maintenance Engineer, and the role comes with an excellent salary and benefits package.

As a Test Maintenance Engineer, you will install and programme PLC controllers into new production and test equipment. You will also develop and upgrade existing equipment to improve quality and throughput.

In your first few weeks in this Test Maintenance Engineer role, you can expect to:

• Design, build and commission production and test equipment/rigs
• Generate electrical schematics for designed equipment
• Create instruction manuals and maintain asset register
• Update maintenance systems
• React to breakdowns

To apply for this Test Maintenance Engineer role, you will need knowledge of production and test equipment/rigs. You will also require the following:

• Experience installing & programming PLC controllers
• Electrical experience (time served/HNC)
• Experience programming HMI panels
• Maintenance CMMS knowledge
• TPM Knowledge

If you're looking to make a positive impact and create change, possessing an inclusive and committed approach, you'll be rewarded with an excellent salary and benefits package.

If this full-time Test Automation Maintenance Engineer job in Leamington Spa motivates and inspires you, please contact Chris Mead, 01384 446128, chris.mead@jonlee.co.uk at Jonathan Lee Recruitment today. We'd love to help you get your next role.

Your CV will be forwarded to Jonathan Lee Recruitment, a leading engineering and manufacturing recruitment consultancy established in 1978. The services advertised by Jonathan Lee Recruitment are those of an Employment Agency.

In order for your CV to be processed effectively, please ensure your name, email address, phone number and location (post code OR town OR county, as a minimum) are included

Servicing Compliance Operative (Maintenance) needed in London, £27,903.00pa PAYE - Reference:5233997

The role will be based inside the M25 and will cover across London.

Works vehicles will be provided

Role Purpose
To undertake weekly bell testing, emergency lighting testing and other building/compliance related checks and services at pre-determined frequencies and in accordance with a set programme of works.

Key Accountabilities

• Carry out weekly fire alarm bell testing to communal systems in accordance with BS 5839, this includes triggering and resetting fire alarm systems and recording the tests in an onsite log book / electronic recording system (PDA)

• Carry out monthly and annual emergency light testing in our communal areas in accordance with BS 5266 to ensure that all luminaires function as designed. Recording results via electronic recording system (PDA)

• Report any faults or service failures through to the contact centre at the point of identifying.

• Carry out other compliance related services as required and record visits via the PDA. (These additional services could consist of but are not limited to, weekly low usage outlet flushing, site inspections and general building compliance checks).

• Undertake daily vehicle checks, e.g. oil levels, water levels, tyres etc. Clean vehicle inside and outside at least once per week. Ensure vehicle defects are reported in accordance with local procedures and requirements

• Conform to all Safety Regulations, Procedures and Practices putting H&S at the core of all you do

This is a full time role on a permanent contract basis.

If you are interested in the role please apply on our website with your CV, alternatively you can email your CV to katie@essentialemploy.co.uk quoting the reference number.

Essential Employment is acting as an Employment Business in relation to this vacancy. Essential Employment is an Equal Opportunities Employer.

All our roles may be subject to pre-employment checks including references so please be prepared.

Due to high volumes of CVs received we are not able to respond to all unsuccessful applications. You will always however hear from us by phone if we are able to take your CV forward to the next stage.

You can also follow us at Twitter/Facebook/LinkedIn or via our website www.essentialemploy.co.uk.