Total 326 engineering job vacancies in Quality Assurance / Control category in Malaysia

• Collaborate closely with cross functional teams in USA to ensure smooth transitions and successful implementation of new products and meeting key quality metrics
• Lead the New Product Introduction (NPI) process coordinating mechanical cleanliness issues between Design Centre and SQE in Asia and ensure timely closures
• Collaborate with Design engineering, material science laboratory in the USA/Japan in implementing new cleanliness specifications, new technology in cleanliness testing, new surface treatment, new material, etc at suppliers.
• Drive technical improvement in the area of cleanliness and contamination control as defined by corporate cleanliness team
• Audit Suppliers to ensure compliance to prescribed requirements in the area of cleanroom operations, electroless Nickel plating, passivation, adhesive control, electropolish process so as to pre-empt excursions due to component cleanliness
• Provide technical advisory role to component SQE on contamination related issues to ensure that the corrective actions are effective and systemic

To support our extraordinary teams who build great products and contribute to our growth, we’re looking to add a Supplier Quality Engineering Manager based in Kallang, Singapore.

Job Responsibilities

• Collects and understands external and internal customers’ expectations or feedback on supplier quality, and cooperates with other top management personnel in formulating and establishing company policies, operating procedures, innovation plans, and goals for supplier quality.
• Analyzes, evaluates, and presents information concerning factors related to suppliers and components such as new regulations, cost of quality, suppliers’ risks, supplier’s performance, and proposals to other members of the management team.
• Cooperate with the material or purchasing team to establish the supplier quality requirements and agreements.
• Lead SQE team to evaluate, develop, and monitor suppliers and components to ensure they comply with Flex requirements and customer requirements on safety, quality, capability, delivery, environment, society regulation, etc.
• Lead SQE team to measure and track suppliers’ performance and to drive problem-solving and continuous improvement.
• Establish and maintain the supplier quality management process and tools, and train SQEs and all peers to ensure compliance of the supplier quality process.
• Commit cross-functional support and form good relationships with internal and external customers in order to maintain a strong support system in the organization, to achieve customer satisfaction and to comply with regulatory requirements

Job Requirements

• Requires a bachelor’s degree in a related field.
• 8 years of relevant work experience and 3 years of managerial experience.
• Internal or external audit certification for ISO 9001 is a must.
• Lean Six Sigma Green Belt or Black Belt certificates are preferred.
• Able to travel and audit suppliers’ process.

We're seeking a driven individual to bring new products to market in a dynamic environment. Test engineer is required to drive High-Volume Manufacturing (HVM) Test Excellence in collaboration with operations. Key responsibilities are as below:

• Optimize Test Strategies: Design and execute comprehensive test plans, balancing test time, yield, and quality to achieve aggressive goals in high-volume manufacturing environments. Identify the most cost-effective testing methods through troubleshooting, validation, and continuous improvement.
• Lead and Collaborate on Engineering Solutions: Co-lead the development and implementation of innovative engineering solutions to meet project requirements. Collaborate effectively with cross-functional teams to ensure project success.
• Champion Innovation and Cost Efficiency: Partner with cross-functional teams to seamlessly integrate cutting-edge testing technologies and elevate existing practices. Conduct research and champion the adoption of cost-saving solutions like Test Time Reduction (TTR) and new test platform enablement, driving CAPEX reduction through innovative test strategies.
• Technical Expertise and Support: Provide technical leadership and expert support in electrical failure analysis for internal and external stakeholders. Address issues related to RMAs, production, reliability, and DPPM (Defects Per Million Parts) improvement.
• Technical Communication and Documentation: Develop and deliver clear, concise technical reports and documentation, including electrical failure analysis work instructions, test equipment guidelines, test reports, and specifications.
• NPI (New Product Introduction) Support: Actively participate in NPI projects, ensuring a smooth transfer of test technology from the mother site to mass production.
• Knowledge Sharing and Mentorship: Conduct technical training sessions for junior engineers and technicians, fostering knowledge transfer and team development.

JOB SUMMARY:

Responsible to maintain Product Quality within Quasar Medical, Singapore Operations. This will include support for new product development and transfers.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

Include the following. Other duties may be assigned.

· Maintain the requirements of IS013485, GMP, FDA 820 and other applicable regulations.

· Participate in the internal and external audit programs as required.

· Supporting NC, CAPA, customer complaint activities.

· Preparing document related to product specifications, test methods, processes, validations etc.

· Supporting the data analysis process during validation.

· Responsible for the management of the equipment calibration in Quasar Medical Singapore.

· Participate in QA initiatives or cost improvement project

· Participate in new product introductions

· Other tasks assigned

SUPERVISORY RESPONSIBILITIES:

Other Quality personnel where required.

EDUCATION/ EXPERIENCE AND QUALIFICATIONS:

· Degree in Engineering or equivalent, 3 yrs of working experiences on Quality related role.

· Proper communication skills, Microsoft skills.

· Knowledge on ISO13485, FDA 820, and/or the Medical Device Directives are preferred

· Experience in Sterilization (ETO) is Added advantage.

WORK ENVIRONMENT:

While performing the duties of this Job, the employee is frequently exposed to moving mechanical parts. The noise level in the work environment is usually moderate. Controlled Environment (Class 10K/100K cleanroom) and office area.

RESPONSIBILITIES:

• Perform testing and commissioning of complex servers and storage products
• Perform quality assurance and risk assessments of end products
• Handle re-configurations in accordance to customer’s specifications
• Software loadings
• Basic knowledge of server and able to handle failure analysis (FA).
• Able to identify various error codes for individual failed server given by the diagnostic program
• UNIX and hardware based troubleshoot and rework on the failed server unit.
• Assists Engineers for pilot Run orders and other product related issues
• Keeping Engineers well informed of the found discrepancies on the line.
• Daily updates of the orders on the line, generating daily, weekly and monthly reports and keeping the line well maintained and organized.

REQUIREMENTS:

• Diploma in Electrical / Electronics / Mechatronics / Computer Engineering
• 0 or 5 years of working experience
• Willing to learn and able to pick up skills quickly
• Familiar with MS Office and good in documentation
• Willing to commit to overtimes

OTHER INFO:

• Work Location: 452 Alexandra Road, Singapore 119961 [Near Labrador Park MRT]
• Working Days / Hours: 7am – 3pm [Mondays to Fridays]

----------------------------------------------------------------------------------------------------

Celestica is an equal opportunity employer. All qualified applicants will receive consideration for employment and will not be discriminated against on any protected status (including race, religion, national origin, gender, sexual orientation, age, marital status, veteran or disability status or other characteristics protected by law).

At Celestica we are committed to fostering an inclusive, accessible environment, where all employees and customers feel valued, respected and supported. Special arrangements can be made for candidates who need it throughout the hiring process. Please indicate your needs and we will work with you to meet them.

COMPANY OVERVIEW:

Celestica (NYSE, TSX: CLS) enables the world’s best brands. Through our recognized customer-centric approach, we partner with leading companies in Aerospace and Defense, Communications, Enterprise, HealthTech, Industrial, Capital Equipment and Energy to deliver solutions for their most complex challenges. As a leader in design, manufacturing, hardware platform and supply chain solutions, Celestica brings global expertise and insight at every stage of product development – from drawing board to full-scale production and after-market services for products from advanced medical devices, to highly engineered aviation systems, to next-generation hardware platform solutions for the Cloud.

Headquartered in Toronto, with talented teams spanning 40+ locations in 13 countries across the Americas, Europe and Asia, we imagine, develop and deliver a better future with our customers.

Celestica would like to thank all applicants, however, only qualified applicants will be contacted.

Celestica does not accept unsolicited resumes from recruitment agencies or fee based recruitment services.

Exciting opportunity for a Chapter Lead - Test Engineering to join our Digitisation and Operational Excellence team at ING Australia. Reporting to the IT Area Lead, this person plays a key role in the continuous improvement of our quality assurance practices as part of Agile and DevOps. As a leader in the software engineering community, you’ll play a key role in the continual advancement of our engineering practices through practices such as Agile and Continuous Delivery, but you will also remain highly aware of industry trends and bring the best of the global engineering practices to ING. You’ll actively work in a Guild closest to your level of expertise and provide alignment across the Chapter you are leading. What you’ll do …… Work along the full lifecycle of software engineering from idea to working production.Build full stack testing, test automation solutions and design reusable tests following Service Oriented Design principles.Leverage the best in TDD / BDD practices to…

Click here to view more detail / apply for Chapter Lead Test Engineering

SafeWork NSW – State Inspector – Engineering (Electrical) Grade: State Inspector Salary: $142,267 - $143,603  superannuation Duration: Ongoing  Location: Parramatta or Gosford Applications Close: Monday 22nd April 2024 (9:59AM) About the Team SafeWork NSW is the state’s workplace health and safety regulator. Our focus is to reduce work related fatalities, serious injuries, and illnesses by securing compliance with work health and safety and associated legislation and improving the safety culture in NSW workplaces. Our ideal candidate will have strong technical industry knowledge. You will apply your industry knowledge, experience and qualifications to work in partnership with NSW workplaces to assist them in creating and maintaining work health and safety standards so that workers return home safely each day. About the role As a State Inspector in Engineering, you will be responsible for providing leadership and expert advice on emerging safety issues to build industry capability and implement harm prevention strategies. You will utilise your high-level leadership, industry knowledge,…

Click here to view more detail / apply for State Inspector - Engineering

Job Description

Own all aspects of supplier quality and reliability for Power Management ICs (PMIC).  Work with suppliers, along with hardware, firmware, product quality and reliability engineering teams to ensure PMIC performance in WD products.  Understand supplier processes to identify and control KPIV parameters to achieve KPOVs critical for WD product function.  Review supplier DOEs and reliability data to ensure adequate quality controls.  Audit supplier processes.  Contribute to WD product failure analysis; when necessary, drive supplier resolution of device failures via the 8D method.  Coordinate with Program Management, Design Engineering, Procurement and Factory for successful program execution with multiple suppliers, making recommendations on supplier selection.  Conduct supplier quality system and process assessments and score for periodic business reviews.  Review supplier change notices and plan the appropriate level of qualification activities.

Duties &Responsibilities: 

• General Management of WD PMIC suppliers: initiating and coordinating meetings regarding technology reviews/roadmaps and issues between Procurement, Design Engineering and suppliers.
• Qualify PMIC devices for use in WD products, conforming to all requirements.
• Manage ATE test reviews with supplier and Design Engineering.
• Monitor Critical to Function parameters via SPC.
• Confirm supplier PMIC reliability demonstration testing.
• Ensure supplier processes are understood via Fishbone diagrams to identify KPIVs and KPOVs; examine critical sensitivities via DOEs.
• Induce supplier activities to strengthen quality systems with FMEA and Error Proofing tools.
• Participate in WD product FAs to determine PMIC contribution. 
• Drive supplier FA of PMIC device failures, utilizing 8D method to determine the root cause hypothesis, validate failure hypothesis, identify escape cause, and implement corrective actions, as well as preventative actions.
• Coordinate MRB for disposition of nonconforming materials.
• Track supplier continuous improvement activities to eliminate common failure modes.
• Research new suppliers and technology roadmaps to assist selection of future PMIC devices.
• Review supplier change notices and work cross-functionally to disposition.

Summary

The Senior Systems Test Engineer for Value Engineering is responsible for evaluation of value engineering efforts on current products and achieving strategic quality goals following the launch of new developments (NPIs) and existing products. Key responsibilities will include working with the team to drive business stakeholders’ priorities participating in plans to successfully support all active products in the areas of cost reduction, supply chain support, and participate in design for in-sourcing projects. with key technologies.

Key accountabilities

• Primarily responsible for providing evaluation results (verification and validation), to ensure proper performance, long-term stability, reliability, robustness, and customer-usability for Value Engineering projects on all PerkinElmer products (include Mass Spectroscopy, ICP OES and GC products). Log and track all defects, test results.

Requirements

• Bachelor of Science degree or equivalent required.
• 2-5 years analytical instrumentation experience.
• Statistical analysis capabilities a plus.
• Excellent verbal and written communication skills; requires interaction with managers, supervisors, engineers in a fast-paced environment.
• Demonstrated ability to succeed in a fast-paced environment, working on multiple projects with constantly changing priorities and deadlines.
• Self-starter with the ability to prioritize, multi-task, and take ownership of projects, performing job requirements with minimal oversight and attention to detail.
• Positive attitude, high energy and troubleshooting skills
• Fully responsible for significant/challenging deliverables keeping management informed of progress and strategy.

• Listed Company
• Basic $3200 to $4300 + Variable Bonus
• Excellent Welfare and Benefits + Career progression
• Working location: Tuas (Company Transport Provided)
• Working hours: 8.30am – 5.15pm
• 5 days’ work week (Monday to Friday)
• Maintain company’s Quality Management System (QMS)

Job Responsibilities:

• Work closely with the Engineering and Production team to develop incoming quality, in-process Quality and Outgoing Quality requirements
• Responsible for all Quality plans for all products to meet customers specifications
• Work with relevant agencies to adhere to certification requirements when required
• Work with management to establish / maintain company’s QMS and Management Representative (MR) of company
• Work with Procurement / Purchasing to ensure that contractors / suppliers quote / supply items that meet customers’ specification
• Working out costing of products when required by management
• Responsible for all equipment calibration / maintenance program within the company
• Complete other tasks assigned by management

Requirements:

• Diploma and/or Degree in Mechanical / Manufacturing / Marine / Materials / Mechatronics Engineering or equivalent
• Proficiency in AutoCAD

Candidates are encouraged to apply this position via Apply Now button with the following information in the resume

• Work experiences and job responsibilities
• Current and Expected salary
• Reason for leaving
• Date of availability
• Education background

We regret that only shortlisted candidates will be contacted.

NG DIAUM YEE (R2198031)

EA Recruitment Pte Ltd

EA License No: 21C0492

Role & Responsibilities:
Will be aligned with Customer Delivery project and will be responsible for testing various data warehouse / data mart solutions using Azure services and tools.

• Working on customer projects
• Analyze requirements, existing application.
• Design and development of test plan, cases, and scripts.
• Ensure that the critical test scenarios for release testing.
• End to end Execution of tests cases, scripts, validate, reconciliation.
• Deliver test plan/ cases in accordance with enterprise standards and within development and operational guidelines.
• Collaborate with relevant team members (BA’s, Dev and QA) to understand project scope and identify and prioritize test cases and scripts and execution across data lifecycle of delta LakeHouse!
• Perform reviews of application code
• Develop in-depth system and application knowledge for higher test quality and coverage.

Must have skills:

• ETL Testing experience with exposure to Data Quality/Data Cleansing on Cloud platform preferably Azure.
• Hands-on on SQL and database concepts.
• Knowledge and experience of full software testing life cycle, Agile and DevOps
• Working & execution of different data management services.
• Good experience in QC. / Test case preparation. & execution
• Proven experience to implement BDD as a methodology for mid to large scale projects (1-2 years)
• Participate in story mapping sessions to define Acceptance Criteria
• Experience in implementing the test automation in agile & DevOps environments (2-5 years)
• JMeter, Pytest, Selenium and other data testing tools.
• Experience with at least one CI/CD tools set (1+ years)
• Familiarity with multiple test automation design patterns (Page Object Model, Data-driven, Keyword driven, Screen Play)
• Familiar with Azure Cloud services such as Azure Data Factory, ADLS, Blob, Azure Databricks.
• Familiar with data ingestion, data processing and analytical pipelines for big data, relational databases, and data warehouse solutions.
• Knowledge and experience in tuning ETL/ELT processes and SQL queries
• 3+ years of experience in data warehouse /or big data projects environment.

Good to have skills:

• Experience and Knowledge on Databricks
• Exposure in DevOps/DataOps in Azure.
• Test Automation for Mobile, Web & API testing, REST-Assured

Qualifications:

• Engineering graduates with a Computer Science background.
• Ability to hold dialogue with a client’s business and technical stakeholders.
• Good knowledge on execution of ETL/DQ/MDM jobs

Responsibilities:

· Develop systems design, programming and selection of equipment instrumentation and controls.

• Prepare and review I&C specifications, requirement, drawings, e.g. instrument lists and datasheets/specifications, ICA panels, control valve, process functional description and SLD

· Responsible for Single Line Drawing, Control Schematic drawings, and programming of SCADA/HMI necessary modification of existing programme.

• Participate in the development of P&ID's, package specifications, logic diagrams, cause & effects, control narratives
• Prepare RFQs, technical bid summaries and make purchase recommendations
• Lead and Interface with suppliers, clients, and other engineers on ICA

· Execution of projects.

· Startup, testing, commissioning and troubleshooting of plants

· Preparation and support tender team for tender and proposal activities.

Requirements:

• Degree in Electrical & Electronics / Instrumentation / Automation Engineering.
• Minimum 15 years relevant working experience, preferably with experiences in Instrumentation and Control.
• Knowledge in Instrumentation and Control.
• Knowledge in high end fieldbus communication (eg. profibus, modbus and other high end communication protocol).
• Able to read & understand single line diagram and generate Bill of Materials from single line diagram.
• Knowledge on control, schematics, motor controls and materials take-off.
• Knowledge in Mitsubishi / Siemens / Schneider / Omron PLC software would be an added advantage.
• Those with relevant project management, process design, and service & maintenance experience will be an added advantage.
• Possess good communication and interpersonal skill.
• Highly motivated, driven by excellence and having an eye for details.
• Able to take on numerous challenging tasks while simultaneously meeting high standards and deadlines/vision.

An attractive remuneration package, benefits, challenging work environment and excellent career growth in the company would be offered to the successful candidate.

Additional Information

Job Description

Position:  Staff Engineer - Instructional Designer

Team: Quality Assurance Engineering Team

 Instructional designer with at least 5-10 years experience, should be able to work from the Western Digital Bangalore office, have the ability to manage multiple deliverables, develop e-learning courses, have experience with authoring tools Articulate Studio or Articulate Storyline, and have experience updating web pages similar to SharePoint.

Job Description:

• In-depth knowledge of learning theories and instructional design models
• Create engaging learning activities and compelling course content, Reshaping content for changing needs.
• Structuring content and optimizing learning.
• Ensuring content matches established objectives. Conducting any research required.
• Set instructional end goals and create content that matches them
• Work with subject matter experts to identify the target audience’s training needs,
• Visualize instructional graphics, the user interface, and the finished product
• Analyze and apply trends and best practices in learning technologies and instructional design
• WBT, ILT, VILT, Microlearning, Mobile learning, Gamification, Assessments, etc
• Training Gap Analysis
• Provide exercises and activities that enhance the learning process
• Create supporting material/media (audio, video, simulations, role-plays, games, etc.)
• Devise modes of assessment, such as tests or quizzes, to measure the effectiveness of the course
• Ability to write effective copy, instructional text, audio, and video scripts

 

 

Responsibilities:

• Perform initial and final inspection of incoming/outgoing products, materials or customer items according to procedures and customer's specifications, including FAI (First Article Inspection) parts.
• Raise report whenever necessary.
• Perform incoming and outgoing documentation check, including FAI parts
• Interact and liaise with suppliers for any quality/technical related issues.
• Control further processing and delivery of nonconforming products.
• Monitor and maintain inspection tools and equipment
• Interact and liaise with customers for any quality/technical related issues.
• Prepare test procedure or design fixture, whenever needed.
• Perform assembly, testing and packing as per procedure/documentation whenever needed. Prepare and implement procedures, work instructions and other quality related documents.
• Implement QMS procedures, work instructions and other quality related duties/documents.
• Carry out failure analysis work and reports.
• Serve as a centre base documents controller for technical data and quality documents.
• Perform any other supporting duties as assigned.

Requirements:

• Minimum Diploma/Degree in Engineering
• Possess at least 1 -2 years prior working experience in engineering functions. Candidates with no experience will be considered as well
• Proficient in Microsoft Office.
• Training will be provided.
• Willing to travel as occasional travel is required.

Interested applicants pls send your updated CV to:

kate.leau@recruitexpress.com.sg

Subject: Quality Engineering

EA Personnel No: Kate Leau Wei Xuan (R1552331)

Company Registration No.: 99C4599

Responsibilities:

· Responsible for day to day project supervision for repairs of commercial and naval vessels

· Ensure engine overhaul processes are carried out effectively and productively in order to meet customer specifications and requirements

· Ensure the quality assurance of engine repair work and oversee assigned project to achieve engine delivery deadline and target

· Workshop maintenance to prevent work interruption especially for critical components such as test bay facilities, cranes, governor and fuel pump/injector overhaul station and etc

· Assist department head in evaluating of technical/engineering requirements of the jobs

· Perform engineering calculations and analysis, review of of drawing and resolving site technical issues.

· Plan and execute job as per planned Critical Plan Analysis (CPA), update and review of changes, resolve them in order to complete job within planned schedule safety and good quality

· Coordinate with transport during heaving lifting/transporting and check condition and status of lifting appliances/equipments and tools

· Submit field/service reports after job acceptance, attached with deviation or deficiency reports

· Liaise with owners representative and/ or class surveyor during witness/ inspection.

· Provide in process quality control support both in workshop and onboard to ensure job completion within schedule and no reportable claim.

· Liaise with project manager (SRM) to arrange for inspection/acceptance as per required

· Responsible for pre-service, disassembly, assembly and pre-delivery inspection and duly filled/initialed the relevant checklists, protocols with reference to update version

· Requisition and verification of spare parts for the service work; consolidate the material, stock take and indent spare required for supplementary work

· Supervise and responsible for the quality control standard of work carried out by his team

Requirements:

· Diploma or Degree in Marine or Mechanical Engineering

· Preferably 3-5 years of working experiences in shipyards or OEMs for engines

· Able to perform troubleshooting on pneumatic, hydraulic, piping and basic electrical system with minimum guidance

· Knowledge on Engine overhauling and applied mechanics

· Familiarity with Engine Warranty, Claims and Job Acceptance related processes

· Able to supervise a team in both workshop and onboard vessels

Other Information:

· Location: Benoi Road (Island-wide transport provided)

· 5 days work week

· Working Hours: 7.25am-5pm