Total 19 QC Engineer job vacancies in Penang

1) To perform in-process and out-going production inspection to ensure conformance to 
quality systems or product specifications including packaging quality. 
2) To monitor and conduct inspections on all production lines including operators. 
3) To carry out checks on returned goods and prepare an analysis report. 
4) To perform periodic lab tests on products. 
5) To work closely with the production department and warehouse on delivery and inventory. 
6) To liaise with health authorities and government bodies on QC related matters. 
7) To liaise with raw material suppliers as and when required. 
8) To continuously carry out necessary QC initiatives and implementation to maintain or 
improve quality standards of products. 
9) To prepare QC reports and procedure documentation. 
10) To observe/ensure good housekeeping and orderliness in production and R&D areas. 
11) To perform routine checks and maintenance of QC equipment. 

Job Description 

• Ensure the cleanliness of manufacturing lines, filling machines and production & 
  Packaging rooms. 
•  Responsible for hygiene and manage, record, update pest control system 
•  Able to manage and train food handlers to comply to the Good Manufacturing Practice 
•  Ensure quality control of product samples 
•  Enforce strict requirements implemented for production and packaging process  thru the ISO 9001:2015 policies 
• Assist in monitoring and updating existing ISO 9001:2015 programs, procedures, and document control programs 
•  Implement quality assurance programs that effectively monitor product 
  manufacturing in compliance with ISO 9001:2015 
•  Perform analytical tests, inspections, and monitoring of incoming rawmaterials/packaging and finished goods for specification compliance 
• Maintain proper ISO 9001:2015 documentations according to requirement

Perks & Benefits

• Open culture
• Personal development opportunities

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Jobs Scope:

• Designing, implementing, and managing Windows server environments for various projects.
• Evaluating, recommending, and implementing cloud solutions to meet project requirements.
• Developing and maintaining backup systems to ensure data integrity and disaster recovery capabilities.
• Implementing virtualization technologies such as VMware or Hyper-V to optimize server resources and enhance scalability.
• Designing and deploying storage solutions to meet the storage needs of various projects, including SAN, NAS, and RAID configurations.
• Collaborating with cross-functional teams to implement hardware upgrades and ensure seamless integration with existing systems.

Requirement:

• Bachelor's degree in Computer Science, Information Technology, or related field.
• Strong interest in system engineering and willingness to learn new technologies.
• Experience or familiarity with virtualization technologies such as VMware or Hyper-V is a plus.
• Effective problem-solving skills and the ability to work efficiently in fast-paced environments.
• Excellent communication skills and the ability to collaborate with cross-functional teams.

Perks & Benefits

• Commission and bonus
• Travelling Allowance (travel stipends, transportation, etc.)
• Flexible working hours
• Casual dress code
• Regular team activities
• Company trips
• Annual Leave / Medical Leave
• Medical Claim
• Optical & Dental claim
• Fast growing company that ensure career growth.

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

ROLES & RESPONSIBLITIES:

1) Assist in organize, plan, oversea and direct electrical projects for construction

2) Assist in perform and disseminate relevant information to various departments related to the project.

3) Assist in monitor project progress and maintain project schedule

4) Provide technical back-up service to the company which shall include develop project budget and track project costs according to contractual obligations and technical support to clients if required.
 

AUTHORITIES:      

1.     To fix technical problems reported by customer

2.     Perform routine preventive maintenance services at customer’s site

3.   To amend the drawings according to customer requirements

COMPETENCE REQUIREMENTS:

1) Work Experience : 3 years experience in handling site work

2) Professional Qualification : Diploma in Electronic / Electrical Engineering

3) Skills :-
a)    Able to communicate with sub-contractor and customer
b)    Troubleshooting and repair of electronic equipments

c)     Autocad, knowledge in drafting, basic measuring and design skills
d)    Able to work independently

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal leave

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan,
• Network Monitoring Systems (NMS), access points, firewalls, cyber security,
• Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma,
• Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

角色和職責：

1) 協助組織、規劃、指導海外電力項目建設

2）協助執行並向專案相關各部門傳達相關訊息。

3）協助監控專案進度並維護專案進度

4) 為公司提供技術支援服務，其中包括根據合約義務制定專案預算並追蹤專案成本，並在需要時向客戶提供技術支援。

當局：

1、解決客戶反映的技術問題

2.在客戶現場進行日常預防性維護服務

3.根據客戶要求修改圖紙

能力要求：

1) 工作經驗：3年現場工作經驗

2) 專業資格：電子/電機工程文憑

3）技能：-
a) 能夠與分包商和客戶溝通
b) 電子設備故障排除與維修

c) Autocad、製圖知識、基本測量和設計技能
d) 能夠獨立工作

津貼和福利

• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 事假

This position is entitled for an attractive commission scheme, apply to find out more!

Responsibilities: 

• To maintain & expand relationship with existing customers; 
• To identify & develop new markets for products & services; 
• To participate in the development and implementation of all activities carried out to achieve sales objectives; 
• To possess/ acquire vital product & process knowledge needed in order to propose solutions to meet customer’s expectation.
• To prepare quotations, proposals, presentations, reports and other sales related documents; 
• To interact with all functional departments to insure customer satisfaction; 
• To perform other duties as assigned. 
  
  

Requirements: 

• Candidate must possess minimum a Diploma / Bachelor's Degree in Engineering
• Minimum 5 years working experience in SMT, PCBA, Semiconductor or related industries. 
• Experience in sales will have an advantage; 
• Able to perform multi-task, work under pressure and tight schedule; 
• Superior outgoing personality, responsible, pro-active, motivated and assertive characters are required; 
• Possess own transport and willing to travel; 
• Good command of English & Bahasa Malaysia & Mandarin (written and spoken);
• Preferably those who are in their late 25s or early 35s.

We are looking for an innovative Technical Support Engineer who is passionate in research, design, prototyping, project management documentation, Product support for advanced automated machine and IoT 4.0 system.

As an Technical Support Engineer, you will be responsible for electrical, programming and product troubleshooting for CMS’s product. You are required to work closely with the Sales team, customer and manufacturer to ensure the customer use CMS product with optimum performance.

Job detail & reponsibilites

• A recognized Degree/Master in Electrical/Mechatronics Engineering or equivalent.
• 1-2 years working experience in related field.
• Working experience in machine design and knowledge in motion control, IOT 4.0 knowledge & PLC programming will be an added advantage.
• Knowledge in electrical wiring drawing.
• Programming knowledge in C#, Visualbasic, C++ and ladder logic programming.
• Troubleshoot product related error.
• Travel outstation to support handlers at customer side.
• Self starter and able to work independently.
• Fresh graduates are encouraged to apply.
• Need to be able speak Mandarin to communicate with Taiwan, If able to speak Japanese will be more advantage.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities

工作職責

• 了解交換器、路由器、SDWAN等與網路和安全相關的軟硬體選型的具體詳細信息
• 網路監控系統 (NMS)、存取點、防火牆、網路安全、
• 網際網路存取管理 (IAM) 和 Web 應用程式防火牆 (WAF)。
• 與客戶溝通，針對客戶平台相關問題進行系統管理、安裝、調試、故障排除、維護和現場支援。
• 在客戶 IT 基礎架構的規劃、設計和實施方面提供指導和專業知識，以獲得最有效的解決方案，以滿足業務需求開發，包括當前和未來的容量要求。
• 提供網路架構圖的規格書和詳細設計圖。
• 根據商定的服務水平，透過電子郵件、來電或現場回應事件、調查並提供升級的事件解決方案。
• 學習並適應新技術、產品和平台，例如 H3C、Cisco、Fortigate、Palo Alto、Aruba 和 Sangfor。
• 設定存取交換器、存取點、IPTV 和 Fortinet 防火牆以及 IPSEC VPN。
• 安裝接取交換器遷移至堆疊交換器並進行網路預防性維護。
• 與售前團隊合作，向客戶進行相關網路產品的演示，作為概念驗證。
• R&M、Commscope、Schneider、Avaya 等光纖配置和故障排除。

工作要求

• 擁有CCNA或CCNP等CISCO證書。
• 對 Cisco、Aruba、Palo Alto、Fortigate、Sophos 解決方案（包括交換器、路由器、防火牆、IP 電話等）的安裝、設定、故障排除和 RMA 擁有豐富的知識。
• 良好的態度和溝通能力。
• 至少1-2年工作經驗。
• 候選人必須至少擁有文憑/高級/研究生文憑，
• 工程（電腦/電信）、電腦科學/資訊科技或同等學歷的學士學位/研究生文憑。

津貼和福利

• 年度獎金
• 彈性福利高達每年 RM1500
• 每半年利潤分享
• 旅遊津貼
• 公司旅行
• 專業發展與成長機會
• 健身會員資格
• 休閒著裝要求

該職位享有誘人的佣金計劃，申請了解更多！

職責：

• 維持及擴大與現有客戶的關係；
• 識別和開發產品和服務的新市場；
• 參與制定和實施為實現銷售目標而進行的所有活動；
• 擁有/獲得所需的重要產品和流程知識，以便提出滿足客戶期望的解決方案。
• 準備報價、提案、簡報、報告和其他銷售相關文件；
• 與各職能部門互動，確保顧客滿意度；
• 履行指定的其他職責。
  
  

要求：

• 候選人必須至少擁有工程學文憑/學士學位
• 至少 5 年 SMT、PCBA、半導體或相關產業工作經驗。
• 有銷售經驗者優先；
• 能夠同時執行多項任務，能夠承受壓力和時間緊迫的工作；
• 個性開朗，有責任心，積極主動，積極進取，有主見；
• 擁有自己的交通工具並願意出差；
• 良好的英語、馬來語和華語能力（書面和口語）；
• 最好是 25 歲末或 35 歲出頭的人。

Key Responsibilities:

- Design and development of mechanical parts include plastic injection molding tray, machining pallet, jig, fixture for SSD drive manufacturing, including conceptualization, prototyping, testing, and implementation.

- Analyze and improve existing manufacturing processes and equipment for better performance, cost-efficiency, and reliability.

- Collaborate with cross-functional teams, including production, quality assurance, and R&D, to integrate new technologies and methodologies into the manufacturing process.

- Conduct thorough risk assessments for equipment designs and processes, implementing preventive measures to minimize downtime and ensure safety.

- Manage equipment development projects, ensuring they meet timelines, budget constraints, and quality standards.

- Stay abreast of the latest trends and advancements in mechanical engineering and SSD manufacturing technology, incorporating innovative solutions into our operations.

- Provide technical guidance and mentorship to junior engineers and technicians.

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab.