Total 175 Others/Any job vacancies

• Set up and operate centerless grinding machines to manufacture metal components to precise specifications
• Monitor machine performance and make necessary adjustments to ensure optimal output and quality
• Perform routine maintenance and troubleshooting on centerless grinding machines
• Supervise subordinate's operators in the department

Perks & Benefits

• Employee equity
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Open culture
• Fitness membership

職責與責任

• 負責依計畫對生產機器和設備進行預防性維護工作。
• 依照計畫（每週、每月、每季等）進行配套設施的維護活動。
• 記錄並存檔所有相關的維護活動報告，例如標準作業規程 (SOP)、預防性維護 (PM)、校正報告等。
• 在適用情況下，協助生產部門進行機器操作。
• 執行上級指派的日常監測、檢查、維護和維修工作。
• 負責處理和啟動任何機械故障的故障排除和維修工作，如果在完成工作中遇到任何困難，立即向上級報告。
• 進行新機器設備的安裝。
• 監督和管理所有外部承包商的工作，確保其按時以高標準完成。
• 確保備件庫存充足。
• 根據上級和管理階層的指示，執行各項維護任務。

要求

• 應徵者必須至少持有機械或相關領域的證書/文憑。
• 至少1年工作經驗，最好有機械維護和設施管理或相關經驗。
• 有超過 1 個空缺

福利待遇

• 休閒著裝要求
• 醫療保險

• 設定並操作無心磨床，以製造符合精確規格的金屬零件。
• 監控機器性能並進行必要的調整，以確保最佳產量和品質。
• 對無心磨床進行日常維護和故障排除
• 監督部門下屬操作員的工作

福利待遇

• 員工權益
• 津貼（旅費、交通費等）
• 休閒著裝要求
• 開放文化
• 健身會員

Responsibilities:

• Operate, maintain, and troubleshoot factory utility systems, including electrical power distribution, compressed air systems, chilled water and cooling systems, HVAC, gas supply, scrubber systems, and wastewater treatment plant (WWTP) equipment.
• Perform water sampling and basic laboratory testing (e.g., pH, COD, BOD, TSS), analyze results, and adjust chemical dosing as required to ensure compliance with standards.
• Ensure a stable and continuous supply of utilities to production lines and critical equipment.
• Monitor utility performance and identify abnormalities to prevent production downtime.
• Carry out general maintenance and handyman tasks as assigned by the supervisor.
• Execute preventive maintenance (PM) activities for all facility and utility equipment.
• Perform troubleshooting and corrective repairs with minimal disruption to production.
• Identify recurring issues and support root cause analysis and implementation of corrective actions.
• Provide on-site technical support during production hours.
• Respond promptly to any facility-related issues affecting production.
• Assist in machine installation, relocation, and commissioning from a facilities perspective.
• Ensure compliance with EHS, fire safety, and regulatory requirements.
• Adhere to shutdown/startup procedures, permit-to-work systems, and contractor safety guidelines.
• Support internal audits, customer audits, and regulatory inspections.
• Participate in emergency response situations (e.g., power failure, gas leaks, fire alarms, water leaks).
• Maintain accurate records for maintenance, breakdown reports, and utility consumption.
• Support 5S practices and maintain good housekeeping in facility areas.
• Provide on-call or shift support for facility-related emergencies.
• Carry out any other duties as assigned by the Company.

Requirements:

• Minimum Diploma or Certificate in Engineering (Electrical, Mechanical, Mechatronics, or related field).
• At least 1–3 years of working experience in factory facilities, utilities, or maintenance environment.
• Basic knowledge of facility systems such as electrical distribution, HVAC, compressed air, chilled water, and wastewater treatment systems.
• Ability to perform basic troubleshooting and maintenance of equipment.
• Familiarity with preventive maintenance (PM) practices and safety procedures.
• Knowledge of EHS (Environment, Health & Safety) requirements and regulatory standards is an added advantage.
• Ability to work in a fast-paced manufacturing environment and support production needs.
• Willing to work on shifts, on-call, or during emergency situations when required.
• Good teamwork, communication, and problem-solving skills.
• Responsible, disciplined, and able to work independently with minimal supervision.

Perks & Benefits

• Allowance
• Medical insurance
• Open culture

Responsibilities:

• Perform highly diversified duties to install and maintain production machines.
• Provide emergency/unscheduled repairs of production equipment during production.
• Translate and interpret equipment manuals and work orders to perform required maintenance and service.
• Diagnose problems, replace or repair parts, test and make adjustments.
• Perform regular preventive maintenance on machines, equipment and plant facilities.
• Utilise a variety of hand and power tools, electric meters and material handling equipment in performing duties.
• Identify faulty operations, defective material and report those and any unusual situations to proper supervision.
• Adhere to safety regulations and maintain clean and orderly work areas.

Requirements:

• Proven experience as maintenance technician.
• Basic understanding of electrical, hydraulic and other systems.
• Familiarity of general maintenance processes and methods.
• Working knowledge of tools, common appliances and devices.
• Manual dexterity and problem-solving skills.
• Solid physical condition and strength with a willingness to work overtime.
• Minimum SPM/O level or equivalent; Certificate in HVAC, building maintenance technology or relevant field will be a plus.
• Certified Maintenance

Perks & Benefits

• Open culture
• Personal development opportunities

Duties & Responsibilities

• Responsible to preform Preventive Maintenance works as per schedule for Production machines and Equipment.
• Carry out Maintenance activity for supporting facilities as per planning (weekly, monthly, quarterly, etc).
• Record and document of all related maintenance activities reports such as SOP, PM, Calibration report and etc.
• Assist Production Department in machine operation setting where applicable.
• Carry out routine monitoring, inspection, maintenance and repair works as assigned by superior.
• Attend and initiate troubleshooting and repair of any machinery breakdown, report immediately to the superior if face any difficulties in completing jobs.
• To carry out installation of new machine equipment.
• Monitor and supervise all work performed by outside contractors is done properly and high standard.
• Ensure the stock for spare part is sufficient.
• Carry out maintenance task as assigned by the superior and management from time to time.

Requirements

• Candidate must possess at least Certificate / Diploma in mechanical or any relevant field.
• Minimum 1 years working experience preferably in machine maintenance and facilities or equivalent.
• with more than 1 vancancy

Perks & Benefits

• Casual dress code
• Medical insurance

Job Description

• Develop, maintain and generate smart scope programs for use in inspection, verification of production materials for incoming, outgoing, FAI and in-process parts.
• Work closely with the QA team to measure, examine and test molded part to identify defects and non-conformance to specification.
• Manage and maintain all measurement machine to ensure functionality and meeting production needs.
• Prepare and submit required report(s) or documentation ensure clear identification of product inspection status

Qualification :

• SPM / Diploma in any related field
• Able to read 2D or 3D drawings
• Good knowledge of measurement equipment such as smart scope, caliper, height gauge etc. is an advantage
• Good communication skill and able to communicate effectively with other function teams
• Able to work in a team and individually
• Able to work under the environment with fast tempo
• Good attendance and punctuality to work

Perks & Benefits

• Open culture
• Personal development opportunities

ATTENTION: GAMERS & ANYONE WHO LOVES I.T！We are a big computer shop in the Penang area. At BESTBUY, we focus on work and non-political performance. If you work hard, a monthly gratification commission will definitely be available. If you like helping customers solve their problems, we welcome you to join us!

Requirements:

- Work in a team

- Good communication skills

- Positive attitude

- Willing to learn something new

- Responsible

- Self-motivated sales person are added advantage

- Possessing own transport is an added advantage

- Willing to work at mainland area

- Able to work on shifts, weekends and public holidays

- Fresh graduates without experience are welcome to apply as there will be on-job training provided

Job Responsibilities :

- Achieve monthly sales target

- Stock & demo arrangement

- Merchandise display and replenishment of stocks

- Attend to customers' inquiries

- Stock take

- Assist ordering and receiving of stocks.

- Process cash and non-cash sales transactions

- Price checking & update

- Perform general housekeeping duties

- Computer setup & installation

- Installing hardware and software systems

- Maintaining or repairing equipment

- Troubleshooting a variety of computer issues

- Setting up computer security measures

- Offering technical support on-site or via phone

Perks & Benefits

• Salary + Commission
• EPF + SOCSO + EIS
• Overtime pay
• Annual bonus (Subject to performance)
• Annual leave
• Medical and hospitalisation leave 
• Medical claims
• Birthday celebration
• Public Holiday meal
• Sales and product training
• Uniform provided
• Staff purchase discount

We are seeking a passionate and highly motivated AI Intern to support our artificial intelligence and machine learning initiatives. In this role, you will work alongside experienced data scientists, engineers, and product teams to help design, build, and test AI-driven solutions that enhance business performance and user experience.

This internship is ideal for students or recent graduates eager to gain hands-on experience in real-world AI development, research, and analytics.

Key Responsibilities

• Assist in developing, training, and evaluating machine learning and deep learning models.
• Clean, preprocess, and analyze structured and unstructured datasets.
• Support the team in building prototypes and proof-of-concept AI solutions.
• Conduct literature reviews on the latest AI/ML techniques and tools.
• Collaborate with cross-functional teams to understand business problems and propose AI-driven solutions.
• Document model development processes, workflows, and performance results.
• Assist in automating tasks using Python, AI APIs, or visualization tools.
• Participate in team meetings, brainstorming sessions, and sprint review

The Senior Network Engineer/Lead is responsible for designing and implementing solutions that compliment a dynamic, always growing and evolving global network for one of the leading organizations in financial services. You will bring a unique perspective to a team that adapts and maintains a secure and reliable network hosted across both cloud and office/site network infrastructure. 

Although the core focus of this role will be to act as a Network Engineer with a solid understanding of Network & IT Infrastructure Fundamentals including protocols, switches, routers/firewalls, it will also include exposure to experience operating within Azure & AWS cloud tenants. You will design and manage the local and wide area networks of our organization to ensure maximum up time for our users.

Reporting to the Director, IT, Infrastructure, you will:

• Design and Architect Networks

  Develop secure, scalable, and highly available network architectures using technologies like VPNs, VPCs, virtual networks, and load balancers.

• Cloud Network Management

  Provision, configure, and manage cloud-based network resources across platforms such as AWS, Azure, and Cisco Meraki.

• Network Security Implementation

  Enforce robust security measures including firewalls, intrusion detection systems, encryption, and compliance with industry standards.

• Performance Monitoring and Troubleshooting

  Continuously monitor network performance, diagnose issues, and optimize for stability, availability, and efficiency.

• Hybrid Network Integration

  Seamlessly connect cloud environments with on-premises infrastructure using secure methods like VPNs.

• Automation and Scripting

  Leverage automation tools and scripting languages to streamline network operations and reduce manual tasks.

• Disaster Recovery and Continuity Planning

  Manage backup strategies, disaster recovery protocols, and ensure business continuity for network systems.

• Documentation and Compliance

  Maintain accurate and up-to-date documentation of network configurations, operational procedures, and compliance records.

• Stakeholder Communication and Collaboration

  Collaborate with IT teams and stakeholders, providing clear updates on incidents, maintenance, and project progress.

• Continuous Learning and Innovation

  Stay current with emerging technologies and trends, recommending improvements to enhance network infrastructure.

• To support production on rotating shift and performing preventive maintenance, repairs, troubleshooting on equipment & machinery and do method solving & problem on machines at production lines.
• Conduct basic Repair / troubleshoot machines problem at production line with assist from Technicians 2, 3 or 4.
• Assists in the installation of new equipment and machines.
• To create, execute & update Preventive Maintenance, Autonomous Maintenance for line equipment, machines, and jig/fixtures according to Master Schedule List per Standard defined.
• To liaise with Maintenance Section or Engineer for maintenance plan and spare parts Availability/replacement/controlling.
• Work with Technicians 1, 2, 3 & 4, Engineer / Supervisor in the day-to-day operation.
• Performs routine maintenance tasks, such as cleaning, lubricating, and replacing parts.
• Documents work performed and preventive maintenance records.
• Carry out any other duties assigned by technicians 3 or 4 and direct superior from time to time.
• To provide verbal & written communication on equipment downtime, improvement, and document it for future reference.
• To ensure the design and the utilization of the machines & equipment are made according with all the Safety features / regulation.
• To ensure 5s is being carried out at workplace and follow Safety Rules & Regulation during work being carried out.
• Spare parts arrangement.
• To support Ad Hoc tasks assigned by direct superior from time to time.

This position is designed for a skilled software engineer with deep expertise in manufacturing environments. At the core of this role is the active, hands-on programming of the critical interfaces that drive our production. Acting as a key link to our central department in Germany, you will be responsible for translating strategic objectives into robust software and optimized manufacturing processes. We are looking for a full-stack developer who not only designs solutions but takes ownership of the end-to-end technical implementation, bringing a passion for improving complex production systems.

Core Responsibilities

• Hands-On Software Development: Take direct ownership of the practical programming, implementation, and maintenance of mission-critical software interfaces, particularly between our MES and SAP systems. 
• Manufacturing Process Conception & Optimization: Leverage your extensive, multi-year manufacturing experience to design, analyze, and continuously optimize material flow and factory control processes.
• Execution of Centralized Goals: In close collaboration with the team in Germany, you will take ownership of strategic goals and be responsible for translating them directly into technical solutions for our global production network.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Ensure production machine performance is well maintain.
• Assist process/equipment engineers to carry out or setup new device evaluation / engineering run when needed.
• Practice 6’s every time after maintenance/repairing /conversion
• Ensure all activities perform to the environment procedures.
• Ensure that all waste/ chemical are properly store/label and scrap.   
• Maintain and perform troubleshooting   on assigned operation.
• Highlight to superior any activities in the company that may be contrary to the environment policy.
• Hand shake Passover/communication book and daily machine status report.
• Follow all environmental procedures in carrying out daily activities
• Highlight to supervisor of any activities in the company that may be contrary to environment policy.
• Other duties and responsibilities which may be assigned by the Company from time to time.
• This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule.

Sebagai sebuah syarikat elektronik yang berkembang pesat, kami sedang mencari calon yang boleh menunjukkan kepakaran mereka dalam membentuk asas kukuh untuk pasukan perkhidmatan kami, terutamanya dalam bidang pemasangan dan perkhidmatan penghawa dingin (Air Con). Juga berperanan sebagai menjadi sumber teknikal utama untuk pasukan perkhidmatan pelanggan kami, membantu mereka bagi memastikan penyelesaian yang lancar dan cepat.

Tanggungjawab Juruteknik Penghawa Dingin termasuk tetapi tidak terhad kepada

• Memasang, memeriksa, menyelenggara, dan membaiki pelbagai jenis dan jenama penghawa dingin komersial dan kediaman.
• Melaksanakan penyelenggaraan preventif berkala dan kerja-kerja pembetulan pada sistem penghawa dingin.
• Mencari punca masalah elektrik dan mekanikal jika ada kerosakan.
• Melaksanakan kerja-kerja membaiki seperti penggantian kompresor penghawa dingin, motor, kipas, dan lain-lain.
• Mengesyorkan kerja-kerja membaiki yang sesuai dan penambahbaikan kepada pelanggan.
• Melaksanakan servis penghawa dingin di kediaman dan premis komersial pelanggan yang termasuk pencucian kimia, pemeriksaan gas, dan perkhidmatan penyelenggaraan umum.
• Memastikan semua kerja-kerja mematuhi standard alat dan Akta Kesihatan dan Keselamatan.
• Melaporkan harian dan mingguan kepada pengurus terus.
• Sebarang tugas lain yang diperlukan oleh penyelia segera.

• Pengalaman praktikal dalam pemasangan, penyelenggaraan (termasuk mencuci kimia), mengesan masalah, dan membaiki penghawa dingin.
• Mampu melakukan kerja fizikal.
• Penguasaan asas bertutur dan menulis dalam Bahasa Melayu dan Bahasa Inggeris
• Lesen memandu GDL.
• Pengalaman minimum 1 tahun diperlukan.
• Selesa bekerja 5.5 hari (Isnin hingga Jumaat 9 pagi hingga 6:00 petang / Sabtu 9 pagi hingga 1 petang).
• Diutamakan dengan sijil Lesen BCA (Lesen Penghawa Dingin) - Pemasangan Sokongan Struktur Untuk Unit Penghawa Dingin atau yang setaraf / Sijil Kebolehan Khas Malaysia (Diutamakan).

Responsible for timely machine installation and ensuring optimal production operations by maintaining equipment and enhancing yield, utilization, and product quality.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform machine installation as per schedule.
• Maintaining the smooth operation of production and optimizing yield, utilization, and product quality through machine sustaining and maintenance.
• Diagnose and troubleshoot equipment malfunctions, identifying root causes and implementing effective solutions.
• Monitor equipment performance indicators and implement corrective actions to address deviations from performance targets.
• Adhere to all safety regulations and protocols while performing maintenance and repair tasks, ensuring a safe working environment for all team members.
• Update machine status from outgoing shift to incoming shift.

Role Description:  

• Responsible for providing professional maintenance, inspection, troubleshooting, and repair services 
for industrial cranes and hoists. This role plays a critical part in ensuring customer equipment operates 
safely, reliably, and efficiently, while representing the Konecranes brand with strong technical expertise 
and customer service. Perform preventive maintenance not requiring compliance inspections, 
corrective maintenance, retrofits, crane installation or commissioning. Technicians can be further 
classified into "Maintenance Technician" or "Inspector" (i.e. those predominantly performing preventive 
maintenance) and "Service Technicians" (i.e. those predominantly performing maintenance and 
retrofits).  

Key Tasks :  
 
• Perform preventive maintenance, inspections, troubleshooting, and repairs on overhead cranes, hoists, 
   and related lifting equipment at customer sites. 
• Diagnose mechanical, electrical, and control system faults and implement corrective actions. 
• Carry out load testing, adjustments, calibrations, and commissioning of crane systems as per company 
   standards and safety requirements. 
• Complete service reports, job documentation, and recommendations for customers accurately and on 
   time. 
• Provide technical support and professional advice to customers regarding equipment condition, safety 
   risks, and service solutions. 
• Ensure all work complies with Konecranes safety policies, ISO standards, and statutory regulations. 
• Support emergency call-outs and breakdown service as required. 
• Collaborate with the Service team to improve service delivery, technical skills, and customer 
   satisfaction. 
• Maintain company tools, service vehicle, and equipment in safe and proper working order.

Awareness of ISO 14001 and 45001 standards

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Good discipline and behavior, willing to learn and grow.
• Shift technician support production to achieve KPI goals on Molding machine down time; utilization & to improve machine MTBA & OEE.
• Ability to perform machine preventive maintenance job and to improve equipment capability thru continuous improvement activities.
• Ability to perform assembly equipment conversion and major troubleshooting to ensure smoothed production line.
• This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Good discipline and behavior, willing to learn and grow.
• Shift technician support production to achieve KPI goals on wire bond machine down time; utilization & to improve machine MTBA & OEE.
• Ability to perform machine preventive maintenance job and to improve equipment capability through continuous improvement activities.
• Ability to perform assembly equipment conversion and major troubleshooting to ensure smoothed production line.
• This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule.

Responsible for timely machine installation and ensuring optimal production operations by maintaining equipment and enhancing yield, utilization, and product quality.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform machine installation as per schedule.
• Maintaining the smooth operation of production and optimizing yield, utilization, and product quality through machine sustaining and maintenance.
• Diagnose and troubleshoot equipment malfunctions, identifying root causes and implementing effective solutions.
• Monitor equipment performance indicators and implement corrective actions to address deviations from performance targets.
• Adhere to all safety regulations and protocols while performing maintenance and repair tasks, ensuring a safe working environment for all team members.
• Update machine status from outgoing shift to incoming shift.

• Attend to and troubleshoot test equipment issues during equipment downtime and low-yield situations.
• Set up and configure test equipment for production runs, including handler conversions and load board changes.
• Perform PCB board debugging and repair when test hardware fails during testing.
• Maintain good housekeeping practices and comply with all company and departmental safety rules, regulations, and disciplinary standards.

As Sputter Process Technician, you will be responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12hour Shift Pattern and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform measurement on characterization / evaluations samples following the experiment plan prepared by Engineer. As well as production monitoring samples.
• Carry out trouble shooting on metrology tools.
• Data compilation using Excel or Power point for measurement samples.
• Monitor Machine alarms, take appropriate action based on guidelines & instructions provided
• Carry out periodic samples house keeping & other tasks assigned by Engineer.
• Support & cooperate with other department to solve assembly issue /MES (Manufacturing Execution System).
• Comply and support EHS policy. Participate company activities such as IMS, 6S, RBA, BCMS etc

Western Digital    
The next big thing in data is you!
As Equipment Maintenance Technician, you will be responsible for maintaining specific tools on a media manufacturing production line. The successful candidate will be able to work with minimal supervision, take initiative and collaborate effectively; they will demonstrate a willingness to learn, flexibility, creative problem solving, exemplary communication skills and an ability to think on their feet. Candidates must be flexible to work a 12 hour AWS Shift and overtime, as required by the team.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead daily sustaining activities for Sputter equipment to ensure high equipment uptime and optimal performance.
• Support Engineers to monitor and drive continuous improvement on key KPIs such as OEE, MTBF, MTTR, Unscheduled downtime and PM effectiveness.
• Support Tool Owner and Equipment Engineer for machine conversion/upgrade and improvement projects.
• Perform routine preventive maintenance per PM schedule. Conduct routine maintenance checks and services on all production equipment.
• Document routine preventive maintenance on PM checklists, record data if applicable and maintain completed checklist/history in tool maintenance system.
• Perform regular inspections and maintenance on production machine to ensure optimal performance. Diagnose and repair mechanical, electrical, and control system issues.
• Document routine preventive maintenance and unscheduled failures details on system database
• Provide inputs to Shift Coordinator or Equipment Engineer to improve PM cycle-time, tool availability, quality/workmanship, reduce media scrap and cost of ownership.
• Lead problem-solving sessions and provide technical guidance to junior technicians.
• Participate in spare parts review, critical spare strategy, and cost optimization initiatives.
• Ensure safety protocols and cleanroom discipline are strictly followed during maintenance activities.

The OneSource & SAP Tax IT Analyst is a hands-on role within Renesas’ Enterprise Applications organization, supporting OneSource and SAP S/4HANA implementation and post go-live support for global tax processes. The role focuses on the functional support of OneSource as the primary tax engine integrated with SAP S/4HANA.

This position requires strong ownership, structured problem solving, and the ability to work independently after appropriate training and ramp-up. The candidate will collaborate with tax business users, FI SAP Analysts, project teams, and cross-functional IT stakeholders to deliver stable, efficient, and sustainable tax technology solutions. This role also provides exposure to global business processes and the opportunity to contribute to a large-scale SAP S/4HANA implementation project.

Role and Responsibilities:

• Support SAP S/4HANA implementation and post go-live operations for global tax processes, with OneSource as the primary tax engine solution.
• Configure, maintain, and support OneSource, including tax rules, tax determination, mapping, master data support, and tax calculation validation.
• Analyze and resolve tax-related incidents, interface issues, and SAP S/4HANA–OneSource integration issues.
• Translate tax and finance business requirements into practical SAP S/4HANA and OneSource solutions, including change requests and enhancements.
• Support testing, documentation, deployment readiness, user training, and post-deployment stabilization.
• Coordinate with internal teams and external support partners to ensure tax-related deliverables are completed with quality and consistency.

Ramp Up measurements including ELFR Measurements and qualification measurements

• Driving the measurements in full self-responsibility
• Booking tester capacity, align with line control
• Preparation of measurements
  • Initiate the preparation of tester cell (changing contact unit and/or part tweaking)
  • Load and start test program in GUI
  • Run test program with first part and check contact
  • Prepare parts in handler
  • Prepare and handle trays failure trays
  • Ensure proper contact
  • Feedback any issues to the corresponding support function and ensure timely support

• Observe yield of running measurement and initiate measures in case of drop down right in time, involve other support functions

Interface Role:

• Serve as the critical link between all involved parties Quality, Test Development, Test Engineering, Equipment Engineering, etc.

Test Cell Troubleshooting:

• Act as the first level support for instabilities and issues with first series, non/pre -series processes during ramp up and qualification measurements on Advantest V93k testers and Cohu Delta Matrix handlers

Proactive Problem Solving:

• Identify, apply, and document solutions and workarounds for recurring issues to ensure high data quality and efficiency.

About the company:

At BID Operations, we are passionate about supporting our clients in their journey towards success. Our mission is to empower you to thrive by handling the essential yet time-consuming aspects of your business operations, allowing you to concentrate on strategic growth and innovation.

Key Responsibilities:

Administer and configure Microsoft 365 services, including user accounts, security groups, SharePoint, Teams, Exchange, and OneDrive. Microsoft Intune device policy and Autopilot, Conditional Access, audit-log review, and license assignment.

Configure and manage Jira workflows, permissions, and user roles to ensure optimal usage across teams. Integrate Jira with other tools as needed. Includes Jira Assets administration.

Manage and optimize Jira Service Management for IT service requests, incident management, and change requests to ensure smooth internal processes. Includes request type, queue, SLA, and automation-rule design across ITIL-aligned practices (incident, request fulfillment, change, problem, knowledge, and service-level management).

Implement and manage access permissions for internal systems, ensuring users have the appropriate level of access based on their roles and responsibilities.

Set up and maintain SSO solutions across systems, including Microsoft Azure AD, ensuring smooth authentication processes for users. Covers SAML and SCIM integrations with a broad SaaS estate

Design and enforce security policies, including password policies, multi-factor authentication (MFA), and encryption standards, in accordance with best practices and regulatory requirements.

Ensure efficient and secure processes for onboarding and offboarding employees, including creating user accounts, assigning roles, and revoking access when necessary.

Set up and manage internal systems to meet business needs, ensure secure integration with existing platforms, and maintain alignment with IT security and compliance standards.

Deploy and manage mobile and endpoint devices using Microsoft Intune (for Windows and Android) and Jamf (for Apple devices). Enforce security policies, ensure compliance, and provide remote support capabilities across all managed devices.

Monitor system logs and perform regular audits to ensure compliance with security policies. Respond to and mitigate security incidents.

Automate repetitive tasks related to user management, access control, and system configurations using PowerShell, Bash, or other scripting languages. Includes Jira/JSM automation rules

Ensure that systems meet compliance standards such as GDPR, HIPAA, or other relevant regulations, and participate in internal and external audits.

Operate within ITIL-aligned service management practices — incident, request fulfilment, change, problem, knowledge, service-level, and vendor management — using JSM as the system of record. Maintain queue hygiene, SLA compliance, and accurate ticket categorization.

Author and maintain Runbooks, Standard Operating Procedures, and Knowledge Base articles in Confluence to enable consistent service delivery.

Liaise with SaaS vendors (e.g., Atlassian, Microsoft) and internal Compliance and Finance teams to coordinate license renewals, seat planning, tier upgrades, and order-form approvals.

Plan, document, and execute IT changes (e.g., permission scheme updates, SaaS integrations, group rollouts) under appropriate peer or stakeholder review, with rollback procedures and clear customer communication.

• Bachelor’s degree in Information Technology, Computer Science, or a related field.
• 3+ years of experience in system administration or IT systems configuration.
• Expertise in Microsoft 365 administration including Exchange Online, Teams, SharePoint, and OneDrive.
• Experience in Jira administration (user roles, permissions, and workflow configurations).
• Experience in Jira Service Management for handling IT service requests and change management.
• Strong knowledge of SSO technologies, particularly Microsoft Azure AD and other identity management platforms.
• Familiarity with access control policies and user lifecycle management (provisioning, de-provisioning).
• Hands-on experience with cybersecurity best practices, including MFA, encryption, and vulnerability management.
• Strong proficiency in scripting languages such as PowerShell and Bash for automating tasks.
• Experience with cloud platforms (Azure, AWS) is a plus.
• Awareness of and exposure to ITIL 4 service-management practices (incident, request fulfilment, change, problem, knowledge, service-level, vendor management).
• Experience with SaaS platform administration.
• Strong written communication and documentation skills — able to author runbooks and Knowledge Base articles, and comfortable using dashboards and metrics.
• Exposure to enterprise AI tooling is a plus.