Total 71 Quality Assurance Engineer job vacancies in Penang

Requirements :

• Education :  Diploma  or Degree  in  electrical  engineering.
• Skills : Electronic testing  design, electronic  systems, electronics  trouble shooting 
• Work Experience : Min 2 years’ electrical engineering  experience  others
• Job Requirement : Project Management, database design,  analyzing  information, reporting  research  results,  attention  to  detail
•  

Job Scopes:

• To design electrical panels, including selecting suitable components.
• To draw CAD drawing for electrical components, harness and panels.
• To draw electrical P&ID. 
• To prepare product reports by collecting, analyzing and summarizing information and trends. 
• To provide engineering information by answering questions and requests. 
• To keep equipment operational by following manufacturer’s instructions and established procedures. 
• To handle other tasks and duties as and when requested by superior.
• To assure product quality by designing electrical testing methods and testing finished products. 
• To confirm components’ capabilities by designing testing methods.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Personal development opportunities

要求 ：

• 教育背景：電機工程文憑或學位。
• 技能 : 電子測試設計、電子系統、電子故障排除
• 工作經驗 : 至少 2 年電機工程經驗
• 職位需求：專案管理、資料庫設計、分析資訊、報告研究結果、注重細節

工作範圍：

• 設計電氣面板，包括選擇合適的組件。
• 繪製電氣元件、線束和麵板的 CAD 圖紙。
• 繪製電氣 P&ID。
• 透過收集、分析和總結資訊和趨勢來準備產品報告。
• 透過回答問題和請求來提供工程資訊。
• 按照製造商的說明和既定程序保持設備運作。
• 根據上級要求處理其他任務和職責。
• 透過設計電氣測試方法和測試成品來確保產品品質。
• 透過設計測試方法來確認組件的功能。

津貼和福利

• 津貼（旅費、交通費等）
• 個人發展機會

Job  Responsibility:

• Process Engineering at Assembly Process
• Setup of new product which consist of document preparation to meet IATF requirements.
• Yield & quality improvement on assigned product types / process.
• Cost reduction projects in Assembly process in order to reduce overall product cost.
• To carry out investigation & propose corrective actions related to quality issue.
• To support Production delivery

Key Responsibilities:

- Design and development of mechanical parts include plastic injection molding tray, machining pallet, jig, fixture for SSD drive manufacturing, including conceptualization, prototyping, testing, and implementation.

- Analyze and improve existing manufacturing processes and equipment for better performance, cost-efficiency, and reliability.

- Collaborate with cross-functional teams, including production, quality assurance, and R&D, to integrate new technologies and methodologies into the manufacturing process.

- Conduct thorough risk assessments for equipment designs and processes, implementing preventive measures to minimize downtime and ensure safety.

- Manage equipment development projects, ensuring they meet timelines, budget constraints, and quality standards.

- Stay abreast of the latest trends and advancements in mechanical engineering and SSD manufacturing technology, incorporating innovative solutions into our operations.

- Provide technical guidance and mentorship to junior engineers and technicians.

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

1. Responsibilities: 

i. as project leader in creating product definition with marketing and applications 

ii. Apply your in-depth understanding of power process technologies, both existing and those under development, to design innovative power management & gate driver products. 

iii. Transistor level design of mixed-signal circuits of new and derivative power management products 

iv. To validate circuit and system performance in the lab. 

Critical Manufacturing is dedicated to empowering high-performance operations to make Industry 4.0 a reality with the most innovative, comprehensive, and modular MES software. We have a global presence, but our headquarters, and the main technical center, are in Porto (Maia), Portugal, where we develop a state-of-the-art solution for Semiconductor, Electronics, Medical Devices, and other Discrete industries.

In 2023, Critical Manufacturing expanded its footprint to Penang, Malaysia.

Recognized for the third consecutive year as a Leader by Gartner, we are part of ASMPT, the world's largest supplier of best-in-class equipment, and technological process partner for the electronics and semiconductor industries.

The role:

Do you have interest in pre-sales and business process analysis? Would you like to develop your skills in advanced manufacturing production environments?

If you are a self-motivated individual who has a passion for Manufacturing Execution Systems and thrives in a fast paced environment, look no further! Team up and apply now as a MES Pre-Sales Engineer.

What you’ll do:

• Conduct business process analysis - elaborate strategies and plans for product implementation (after customer or potential customer visits)
• Create and deliver presentations and perform product demonstrations for potential customers
• Propose high-level technical solutions fulfilling customer requirements
• Perform project implementation estimations and propose high-level project plans
• Respond to customer technical questionnaires (RFQ, RFI)
• Statement of Work analysis and development
• Handover won projects to project implementation teams

What you must have:

• Industrial Management Engineering or similar degree
• Knowledge of advanced manufacturing production processes and requirements, particularly in electronics, semiconductors or medical devices industries
• Ability to work remotely with internationally distributed virtual teams
• Excellent written and verbal communication skills
• German proficiency - spoken and written
• Availability to travel
  

What we consider a plus (not mandatory):

• Previous experience with MES product implementation/deployment of at least 1 year
• Knowledge of agile methodologies

Job Responsibilities:

1. Work and lead junior engineer towards projects delivery with other layout and circuit design engineers to resolve any technical issues that will affect layout to ensure high quality.
2. Utilize EDA tools (Cadence and Synopsys) for layout design and all related verification items, perform all layout activities as cell and block level creation, edit and full verification.
3. Use state-of-the-art layout techniques for matching, ESD, latch-up prevention and parasitic reduction and work with an awareness and understanding of the process from physical point of view.
4. Attending all relevant project meetings, continuous assessment and reporting of timescale risks.
5. Where possible, use schematic driven layout and consider top level auto routing.
6.  Involve in review session and prepare all related document and data preparation for wafer tape out.

Job Responsibilities:

1. Work and lead junior engineer towards projects delivery with other layout and circuit design engineers to resolve any technical issues that will affect layout to ensure high quality.
2. Utilize EDA tools (Cadence and Synopsys) for layout design and all related verification items, perform all layout activities as cell and block level creation, edit and full verification.
3. Use state-of-the-art layout techniques for matching, ESD, latch-up prevention and parasitic reduction and work with an awareness and understanding of the process from physical point of view.
4. Attending all relevant project meetings, continuous assessment and reporting of timescale risks.
5. Where possible, use schematic driven layout and consider top level auto routing.
6.  Involve in review session and prepare all related document and data preparation for wafer tape out.

POSITION SUMMARY:

In this position, the individual will be responsible for fully supporting the Department Manager on the development of the Company goals, strategy and tactics. The most important being the ability to work with the team to assure the good execution. The individual will work with the team to fully support the company and department goals.

PRINCIPLE DUTIES AND RESPONSIBILITIES: (Describe the specific roles and responsibilities of the position)

• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.
• Support Automation and development for new automatic and robotic equipment qualification and sustaining.
• Support the Production Line. Report online machine status and issue to reporting manager
• Follow daily/shiftly line issue and production support for automation equipment.
• Continuous improvement on direct/indirect material cost down, UPH, MTBA, and MTBF enhancement program.
• Ensure automation equipment in good performance to meet the goals on quality, yield, and cost, utilization and cycle time.
• Perform automation equipment conversion and set up. Observe 6S on daily job to ensure the continued and smooth production line.
• Able to conduct trainings to Operator/technicians on machine operation and skill improvement.
• Able to replace spare parts and machine buy off.
• Experience in automation equipment’s
• Manage engineer’s logistic needs.
• Any other duties assigned from time base on schedule and unscheduled activities
• Participate in productivity improvement, Lean, Kaizen and similar activities and provide manufacturing process optimization solution

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
• Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)

      2. To participate in project meeting to clarify plant/ production requirement on test  
          system.

      3. Responsible on full test implementation according to test procedure according to PAV
          defined by CoC team and achieve defined test coverage, make sure alignment and
          calibration process (such of flashing of memory, tuner alignment/ calibration.) is in line
          with test procedure.

      4. To support line for trouble shooting in test system.

      5. General support on the following:

• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

       6. Any other TEF7 related duties assigned to.

We are looking for people who take initiative and ownership in their work. As part of our team, you will be responsible for planning and implementing innovative test strategies and trimming procedures for MEMS-based sensors.

We seek individuals who can think outside the box and contribute creatively to our projects. You will have the opportunity to develop and optimize test concepts and programs for testing, characterization, and customer samples. Your understanding of system functionality, testability, and product quality will be invaluable as you collaborate within our development team.

Driving innovation is at the core of what we do. You will have the autonomy to independently create and design test strategies, working closely with MEMS Development. Additionally, you will take charge of the technical conception, development, and setup of laboratory facilities within the fab.

Reliability is key in our team members. You will coordinate module-specific measurement technology development in collaboration with advanced engineering, various development departments, and production. This includes meticulous tracking of time schedules and costs.

Lastly, we expect our team members to effectively delegate tasks. You will assign hardware and software development tasks to both external service providers and internal colleagues. Managing the workflow and ensuring accountability for results will be crucial in this role.

Responsibilities:

• Optimize or design new production processes in cooperation with product engineers, to enable product quality and yield.
• Debug and add new features to internally developped measurement software for the laboratory in C++ or C#.
• Enable testing new production methods and product variants in the laboratory.
• Create documentation of the production processes and support their implementation.
• Collaborate with colleagues in multiple locations and domains on a daily basis.

1. To manage the task of Quality Assurance for the products under his/her charge to ensure that the products, leaving the company meet the standards for quality set by the company.
2. To coordinate on corrective action for any quality problem occurring at QA, reliability, and customers.
3. To perform failure analysis on reliability, QA and customer detected defects and generate reports if necessary.
4. To initiate/ participate in quality improvement projects.
5. To assist QA Manager as per required and work towards QA department objectives.