Total 77 quality control engineer job vacancies in penang

POSITION SUMMARY:

In this position, the individual will be responsible for fully supporting the Department Manager on the development of the Company goals, strategy and tactics. The most important being the ability to work with the team to assure the good execution. The individual will work with the team to fully support the company and department goals.

PRINCIPLE DUTIES AND RESPONSIBILITIES: (Describe the specific roles and responsibilities of the position)

• Documentation: SOP, WI, FMEA, OCAP and Control Plan for related process.
• Ensure effective hand shaking process of new device/product introduction to the line and new process technology capabilities developments.
• Support Automation and development for new automatic and robotic equipment qualification and sustaining.
• Support the Production Line. Report online machine status and issue to reporting manager
• Follow daily/shiftly line issue and production support for automation equipment.
• Continuous improvement on direct/indirect material cost down, UPH, MTBA, and MTBF enhancement program.
• Ensure automation equipment in good performance to meet the goals on quality, yield, and cost, utilization and cycle time.
• Perform automation equipment conversion and set up. Observe 6S on daily job to ensure the continued and smooth production line.
• Able to conduct trainings to Operator/technicians on machine operation and skill improvement.
• Able to replace spare parts and machine buy off.
• Experience in automation equipment’s
• Manage engineer’s logistic needs.
• Any other duties assigned from time base on schedule and unscheduled activities
• Participate in productivity improvement, Lean, Kaizen and similar activities and provide manufacturing process optimization solution

Critical Manufacturing is dedicated to empowering high-performance operations to make Industry 4.0 a reality with the most innovative, comprehensive, and modular MES software. We have a global presence, but our headquarters, and the main technical center, are in Porto (Maia), Portugal, where we develop a state-of-the-art solution for Semiconductor, Electronics, Medical Devices, and other Discrete industries.

In 2023, Critical Manufacturing expanded its footprint to Penang, Malaysia.

Recognized for the third consecutive year as a Leader by Gartner, we are part of ASMPT, the world's largest supplier of best-in-class equipment, and technological process partner for the electronics and semiconductor industries.

The role:

Do you have interest in pre-sales and business process analysis? Would you like to develop your skills in advanced manufacturing production environments?

If you are a self-motivated individual who has a passion for Manufacturing Execution Systems and thrives in a fast paced environment, look no further! Team up and apply now as a MES Pre-Sales Engineer.

What you’ll do:

• Conduct business process analysis - elaborate strategies and plans for product implementation (after customer or potential customer visits)
• Create and deliver presentations and perform product demonstrations for potential customers
• Propose high-level technical solutions fulfilling customer requirements
• Perform project implementation estimations and propose high-level project plans
• Respond to customer technical questionnaires (RFQ, RFI)
• Statement of Work analysis and development
• Handover won projects to project implementation teams

What you must have:

• Industrial Management Engineering or similar degree
• Knowledge of advanced manufacturing production processes and requirements, particularly in electronics, semiconductors or medical devices industries
• Ability to work remotely with internationally distributed virtual teams
• Excellent written and verbal communication skills
• German proficiency - spoken and written
• Availability to travel
  

What we consider a plus (not mandatory):

• Previous experience with MES product implementation/deployment of at least 1 year
• Knowledge of agile methodologies

We are looking for people who take initiative and ownership in their work. As part of our team, you will be responsible for planning and implementing innovative test strategies and trimming procedures for MEMS-based sensors.

We seek individuals who can think outside the box and contribute creatively to our projects. You will have the opportunity to develop and optimize test concepts and programs for testing, characterization, and customer samples. Your understanding of system functionality, testability, and product quality will be invaluable as you collaborate within our development team.

Driving innovation is at the core of what we do. You will have the autonomy to independently create and design test strategies, working closely with MEMS Development. Additionally, you will take charge of the technical conception, development, and setup of laboratory facilities within the fab.

Reliability is key in our team members. You will coordinate module-specific measurement technology development in collaboration with advanced engineering, various development departments, and production. This includes meticulous tracking of time schedules and costs.

Lastly, we expect our team members to effectively delegate tasks. You will assign hardware and software development tasks to both external service providers and internal colleagues. Managing the workflow and ensuring accountability for results will be crucial in this role.

Responsibilities:

• Optimize or design new production processes in cooperation with product engineers, to enable product quality and yield.
• Debug and add new features to internally developped measurement software for the laboratory in C++ or C#.
• Enable testing new production methods and product variants in the laboratory.
• Create documentation of the production processes and support their implementation.
• Collaborate with colleagues in multiple locations and domains on a daily basis.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

• Business Controls and Compliance provides assurance to the management that business operational process and reporting controls are working in accordance with corporate audit requirements, internal control framework and company directives, to support the company’s rapid growth strategy.
• Define, review, validate and process information, and then execute business processes in accordance with contracts, policies and procedures established with distributors.
• Review and understand end-to-end business processes, assess key controls, and identify deficiencies, improvement opportunities and analyze root causes.
• Monitor performance, drive corrective actions, and then facilitate the business process and system improvements.
• Develop and oversee the implementation of new processes and workflows and monitor progress and effectiveness.
• Support business continuity processes in Sales & Distribution management including Order management, escalation/cancellation, Stock Rotation/Transfer, Consignment, etc.
• Provide support in terms of data analytics, preparing output from such analytic processes to strive for process improvement and data-driven decisions.
• Support audit process in collaboration with Finance or Internal Audit teams.

1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
• Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)

      2. To participate in project meeting to clarify plant/ production requirement on test  
          system.

      3. Responsible on full test implementation according to test procedure according to PAV
          defined by CoC team and achieve defined test coverage, make sure alignment and
          calibration process (such of flashing of memory, tuner alignment/ calibration.) is in line
          with test procedure.

      4. To support line for trouble shooting in test system.

      5. General support on the following:

• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

       6. Any other TEF7 related duties assigned to.

1. To manage the task of Quality Assurance for the products under his/her charge to ensure that the products, leaving the company meet the standards for quality set by the company.
2. To coordinate on corrective action for any quality problem occurring at QA, reliability, and customers.
3. To perform failure analysis on reliability, QA and customer detected defects and generate reports if necessary.
4. To initiate/ participate in quality improvement projects.
5. To assist QA Manager as per required and work towards QA department objectives.

1. To execute semiconductor evaluation activities as specified by NPD1. To execute semiconductor evaluation activities as specified by NPD.

2.  Maintain accurate documentation of process recipes, parameters, and procedures of the evaluation.

3. Prepare reports and presentations to communicate findings

4. Coordinate cross-departmental collaboration necessary to complete and keep to evaluation schedule.

5. Adhere to the operating procedures and observe the safe practices at all time during evaluation activities

Dalam peranan ini, anda akan bertanggungjawab untuk:

• Melakukan servis kawalan makhluk perosak seperti semburan, pewasapan, dan pemasangan perangkap untuk menghapus dan mengawal pembiakan lipas, semut, anai-anai, nyamuk, tikus, lalat, kekaltu, dan haiwan-haiwan perosak yang lain.
• Memberi sokongan kepada Penyelia dan pasukan dalam pelaksanaan tugas.
• Membina dan mengekalkan hubungan yang baik dengan pelanggan-pelanggan.
• Memberi laporan yang betul dan tepat pada masanya apabila diarahkan oleh Penyelia.
• Tugas-tugas lain yang berkaitan dengan pekerjaan yang mungkin diberikan kepada anda dari semasa ke semasa.

SEMUA JANTINA DARI PELBAGAI BANGSA ADALAH DIGALAKKAN UNTUK MEMOHON JAWATAN INI

Calon yang ideal memiliki:

• Minimum kelayakan pendidikan tahap SPM dan penyerahan sijil ketika permohonan
• Warganegara Malaysia, berumur antara 21 dan 35 tahun (36 tahun ke atas masih boleh dipertimbangkan sekiranya mempunyai pengalaman di dalam industri yang berkaitan).
• Mempunyai Lesen GDL yang sah dan mempunyai pengangkutan sendiri
• Berminat melakukan servis dan kerja luar (outdoor).
• Menetap di kawasan berdekatan.

Sangat Diingini Jika Anda:

• Mempunyai sifat ingin belajar. Pengalaman tidak diperlukan kerana latihan insentif akan disediakan.
• Berdisiplin dan mampu mematuhi semua polisi dan dasar Syarikat.
• Berupaya untuk berbahasa Melayu dan juga memahami bahasa Inggeris mudah (penulisan dan percakapan).
• Boleh menggunakan telefon pintar dan celik IT/teknologi.

Ganjaran dan Faedah

• Gaji pokok yang menarik, pelbagai jenis elaun dan insentif (bergantung kepada prestasi anda).
• Fleksibiliti dan kepercayaan untuk menggunakan van syarikat bagi tujuan kerja. Kad petrol juga disediakan.
• Insurans kemalangan, nyawa, dan kemasukan hospital.
• Faedah rawatan pesakit luar.
• Faedah rawatan mata dan gigi.
• Caruman KWSP, PERKESO & SIP.
• Pakaian seragam percuma (baju, seluar, topi, t-shirt, sarung kaki, kasut keselamatan, dan alat keselamatan kerja).
• Telefon bimbit dan/atau kad sim untuk kegunaan kerja (bagi yang berkelayakan).
• Pelbagai anugerah berkenaan kecemerlangan kerja, aktiviti korporat, dan inisiatif untuk kebajikan pekerja.

Anda akan dialu-alukan oleh rakan-rakan sekerja yang ramah, mantap, berdaya saing, bermotivasi tinggi, dan fokus untuk mencapai matlamat dan hasil.

Jadi, tunggu apa lagi? Ayuh, mari sertai pasukan kami dengan MEMOHON SEKARANG!

Peluang Sama Rata

Rentokil Initial percaya dalam menyokong semua pekerja dengan menyediakan peluang yang sama dan mengelakkan diskriminasi. Kami juga memberi penekanan kepada kepelbagaian di tempat kerja. Ini bermaksud, kami serius untuk mewujudkan persekitaran yang inklusif yang menerima perbezaan setiap individu, menghargai kekuatan mereka dan memberikan peluang kepada semua rakan sekerja untuk mencapai potensi penuh mereka. Adakah anda ingin menyediakan perkhidmatan profesional yang bernilai untuk komuniti anda? Adakah anda yakin yang anda mampu melakukan kerja ini dengan baik? Mohonlah hari ini!

Lokasi cawangan ini:

Rentokil Initial (M) Sdn Bhd 

No. 1, Jalan Sungai Tiram 7, Taman Perusahaan Nyaman Mutiara, 11900 Bayan Lepas, Penang

1. Generate KPI reports and track KPIs
2. To perform test data analysis with IT tools and statistical methods to benchmark test sites or investigate performance of new manufacturing sites
3. Coordinate Bosch internal change management, generate and track engineering change requests for semiconductor products
4. Support new products introduction within our international production network
5. The candidate is responsible for micromechanical automotive sensors in our international production network
6. The candidate is required to manage product data in series production and coordinate product issues at multiple manufacturing locations around the globe
7. Responsible to the monitoring of quality and costs of the products inclusive of planning, controlling and supervising product improvement projects
8. You will lead working groups within the framework of project, yield and quality management
9. The candidate is required to coordinate manufacturing activities of sensor products in an international production network in cooperation with the development and manufacturing departments

About Operations Engineering Division (OED): OED is the central team that supports all Business Unit Design and Development teams, and other organizations including Sales, Marketing, Business Operations, Foundry Operations, and Test.  OED provides a platform for managing all process technology and PDK development for both Internal and External Foundry processes. This strong and highly qualified team (mostly MS/PhD) add strength in developing Test Technology, Foundry Operations, and Yield management. The team’s world class contributions lead to aggressive NPI strategies and continual cost and gross margin improvement.

Duties and Responsibilities:

Cloud based yield tool deployment, Foundry Yield Improvement, Datamining support for fab escalations and yield tool training.

The new hire is expected to:

1. Drive Foundry Defect Density Reduction.
2. Analyze gaps between defect driven yield and actual ATPG yield to improve foundry related process / defect issues for yield improvement.
3. Collaborate with foundry process, PE/TE and foundry technical manager to design foundry DOEs for yield improvement.
4. Work with foundry on the WAT / Inline monitoring.
5. Drive foundry yield and gross margin improvement.
6. Support foundry Excursion/ RMA data analytics and work with foundry managers and QA for hold lot disposition.
7. Support foundry/fab transfer safe launch data analytics.
8. Conduct D0 yield calculation for new projects.
9. Maintain detailed documentation of yield analysis, experiments, and corrective actions for future reference and continuous improvement.
10. Drive PDF data integrity and loading for the foundry projects.
11. Provide PDF Exensio consultations for product/test teams.
12. Build PDF Exensio custom template as needed.

• Coordinates with Central IT department for all Plant IT Infrastructure setup, IT Infrastructure maintenance & IT Infrastructure improvement
• Manage the asset planning, procurement & controlling for all IT Infrastructure equipment
• Planning & controlling of budget for IT Infrastructure
• Coordinates all projects related to Central IT Dept services to our plant
• Responsible for the IT Security planning and implementation in the plant to ensure compliances with the Bosch Central Directives
• Enable highly available IT systems with the best performance while maintaining the highest security standards in plant
• Supports and ensuring conformity for all IT Manufacturing audits in the plant
• Participate & contribute to the success of the Bosch Automotive Electronic Semiconductor Division’s IT Manufacturing organization
• Responsible as the Local Authorization Coordinator (LAC) for plant
• Managing the access administration to MES, SAP & Reporting in plant
• Support the Data Security setup and coordination in plant

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• HAMR (CE) program development in Penang
• Manufacturing improvement projects
• Product improvement iteration qualification

Regular

• Ensure new product/process transfer from GO to Penang and develop with good process control and good reliability performance
• HAMR (CE) program development to meet the performance requirement from HDD.
• Establish unique process HAMR from NPI to mass production, throughput improvement, cost reduction, yield improvement and utilization improvement projects, & ensure no compromise in term of product quality.
• Correspond to process design change iteration for performance improvement, this includes process optimization and tribology qualification.
• Provide general guidance to sputter ME yield/process team on Magnetic & Interface related process/yield issues

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis sure

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• HAMR (CE) program development in Penang
• Manufacturing improvement projects
• Product improvement iteration qualification

Regular

• Ensure new product/process transfer from GO to Penang and develop with good process control and good reliability performance
• HAMR (CE) program development to meet the performance requirement from HDD.
• Establish unique process HAMR from NPI to mass production, throughput improvement, cost reduction, yield improvement and utilization improvement projects, & ensure no compromise in term of product quality.
• Correspond to process design change iteration for performance improvement, this includes process optimization and tribology qualification.
• Provide general guidance to sputter ME yield/process team on Magnetic & Interface related process/yield issues

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis sure