The Senior Grid Planning & Strategy Engineer is the strategic architect responsible for aligning our BESS pipeline with Malaysia’s National Energy Transition Roadmap (NETR). You will translate high-level energy policy into physical infrastructure investment strategies, identifying exactly where the grid requires BESS to maintain stability. By analysing long-term demand and RE integration challenges, you will position the company as a Strategic Advisor to the TNB Grid System Operator (GSO) and Suruhanjaya Tenaga (ST).

Key Responsibilities

• Policy-to-Infrastructure Translation: Analyse the NETR and Integrated Resource Planning (IRP) targets to identify the physical transmission upgrades and BESS capacities required to meet 700MW+ RE integration goals.
• Macro-Grid Stability & Planning: Perform regional load-flow and contingency ($N-1$) analyses using PSS/E or DIgSILENT. Identify "Weak Grid" nodes where BESS can provide synthetic inertia and voltage support to prevent curtailment of solar assets.
• Strategic Advisory (GSO/ST Liaison): Act as the lead technical diplomat with TNB GSO and ST. Provide evidence-based recommendations on grid-level BESS dispatching and infrastructure design to influence future Grid Code updates and tender structures.
• BESS Dispatch & Revenue Optimization: Model grid-level BESS dispatch scenarios (e.g., peak shaving, frequency regulation, and spinning reserve). Advise the commercial team on how the National Load Despatch Centre (NLDC) will utilize assets under the CRESS framework.
• Investment Roadmap Development: Design 5-to-10-year infrastructure investment plans. Identify optimal Point of Interconnection (POI) locations in the 132kV/275kV network where the grid is "thirsty" for BESS, ensuring long-term project bankability.

• Bachelor’s or Master’s Degree in Electrical Engineering (Power Systems) or Energy Policy & Planning.
• 8 years in Power System Planning, Transmission Engineering, or Grid Operations.
• Registered Professional Engineer (Ir.) or Graduate Engineer with the Board of Engineers Malaysia (BEM).

The Senior Grid System Design Engineer is the technical "Gatekeeper" for our BESS pipeline. This role carries dual responsibility: performing the advanced mathematical simulations required for TNB approval and acting as the primary technical auditor for BESS and PPC hardware suppliers.

Key Responsibilities

• BESS Dynamic Modeling: Develop site-specific BESS models including Inverters (PCS), Battery
• Management Systems (BMS), and Power Plant Controllers (PPC). You must accurately model GridForming (GFM) logic, Virtual Inertia, and sub-50ms Fast Frequency Response (FFR).
• Supplier Technical Auditing: Critically review BESS and PPC supplier proposals. You must verify if their stated ramp rates, Round Trip Efficiency (RTE), and control loop latencies are mathematically achievable and compliant with TNB requirements.
• Grid Impact Studies: Lead the execution of Load Flow, Short Circuit, and Transient Stability studies. must specifically address Weak Grid ($SCR < 2.0$) challenges and ensure the BESS does not cause sub-synchronous oscillations.
• TNB Regulatory Representative: Serve as the lead technical representative at TNB GSO (EMS Unit) meetings. You will defend the simulation results and manage the end-to-end Interconnection Agreement (IA) process.
• Harmonic & Power Quality Validation: Perform detailed harmonic resonance studies to identify if a supplier's inverter switching frequency will clash with the local TNB grid impedance.

• Bachelor’s or Master’s Degree in Electrical Engineering (Power Systems or Power Electronics focus).
• Experience: * Minimum 8+ years in utility-scale power systems.
• Direct experience in modeling at least two utility-scale BESS projects (min 10MWh+) in a professional simulation environment.
• A proven track record of at least 3 successful TNB Grid Impact Study (GIS) approvals.
• Professional Status: Must be a Professional Engineer (Ir.) or a high-level Graduate Engineer registered with the Board of Engineers Malaysia (BEM).
• Technical Authority: Ability to demonstrate prior experience in rejecting or correcting supplier technical designs based on simulation findings.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Good discipline and behavior, willing to learn and grow.
• Responsible for Equipment Engineering KPI which is MTBA, OEE, machine downtime, Quality and Preventive maintenance.
• Ability to support on hardown machines and assist technician to troubleshoot the machine.
• Ability to support on machines improvement in term of productivity and quality.
• "This role requires reliable presence to support operational and team objectives. Employees are expected to maintain regular attendance aligned with the company’s work schedule."

To work on the following tasks with guidance:
1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team
accordingly to following requirement:
a. To track project budget and ensure equipment cost within the planed budget.
b. On time delivery of test systems to the production line according to project milestone (include
manage of equipment, hardware interface and mechanical jig and fixture purchase)
c. Release the test system according to Test System Release Procedure.
d. To train and coach maintenance team to be able to handle test system breakdown more
effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target.
(eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System
Setup guideline and test fixture and job design concept)

2. To participate in project meeting to clarify plant/ production requirement on test system.

3. Responsible on full test implementation according to test procedure according to PAV defined by CoC team
and achieve defined test coverage, make sure alignment and calibration process (such of flashing of
memory, tuner alignment/ calibration.) is in line with test procedure.

4. To support line for trouble shooting in test system.

5. General support on the following:
• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine
efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling
from new project set up team after SOP.

6. Any other TEF7 related duties assigned to.

As our Hosting Systems Engineer you’ll be responsible for designing, implementing, maintaining, and managing the infrastructure that powers web services, applications, and customer data. This role sits at the intersection of system administration, infrastructure, and cloud technology, ensuring that hosted systems remain available, secure, and efficient. 

Within this role responsibilities will include the management and optimisation of NEXTDC computing and storage infrastructure, including Active Directory, Windows (and/or other systems) Server environments, and Hyper-V virtualisation. The role will drive the overall health and performance of NEXTDC systems, designing solutions for scalability and high availability, supporting Azure integrations, and managing storage solutions. ​

Your scope will cover:

• Designing and implementing scalable solutions for Windows Server environments (2016, 2019, 2022), Active Directory, and Hyper-V virtualisation
• Overseeing the architecture, maintenance, and optimisation of Group Policies, DNS, DHCP, and FSMO roles
• Developing and testing disaster recovery plans, manage backups (SAN), configure failover clusters, and ensure minimal downtime in case of system failures
• Monitoring system health for reliability, scalability, and security and provide advanced troubleshooting for complex system issues; identify and resolve performance bottlenecks
• Leading automation initiatives using PowerShell to streamline system management and improve operational efficiency
• Executing security measures, including role-based access control, encryption (BitLocker), and compliance with auditing standards
• Performing patch management using WSUS or SCCM, ensuring secure and timely deployment of updates and addressing vulnerabilities
• Supporting hybrid cloud initiatives, including Azure AD integration, cloud backup, and cloud-to-on-premises connectivity

Your technical skillset will include:

• Strong knowledge of Linux, Unix, and Windows Server systems
• Proficient in Windows Server administration and Active Directory management
• Expertise in Hyper-V, storage solutions (SAN, NAS, iSCSI, RAID), and PowerShell scripting
• Knowledge of networking protocols (TCP/IP, VPN, firewalls), patch management (WSUS, SCCM), and security tools (Windows Defender, role-based access control)
• Scripting/Automation: Proficiency in scripting languages (e.g., PowerShell, Bash) and automation tools like Ansible
• Familiarity with disaster recovery, backup solutions​
• Knowledge of Azure hybrid environments, incl. integration

This position is expected to provide Test Operations and Engineering support for products post manufacturing release and deliver operational excellence through cost reductions, OEE, yield and cycle time improvements to achieve our test KPI goals with our Test Manufacturing Sites (Internal and Outsourcing Suppliers) in Malaysia, Thailand, Singapore and across Asia (Taiwan, China, Korea). This position reports into Operations Engineering Department (OED).

Key Responsibilities

• Responsible for Test Operations interface to Renesas Product Groups and other functional teams (Supply Chain, Quality, Packaging, Foundry, PMO) across US, Japan, India, Malaysia, and China on all phases of product lifecycle
• Execute daily test operations activities with internal factories and test OSATs to ensure customer delivery fulfillment (i.e. Lot tracking and dispositions, Test Program releases, Hardware Troubleshooting/Repairs, Equipment up-time, Tester Utilization OEE tracking, Continuous Improvement Process, etc)
• Coordinate Probe/Final Test transfer from New Product Introduction to High Volume Manufacturing from Renesas Product Group groups
• Execute new test capacity expansions (tester/ handler/ hardware) to ensure sufficient capacity and meet production demand
• Deployment of new tester/handler technology and test solutions to test manufacturing sites from test development
• Implement best known practices and process within test manufacturing sites
• Drive Gross Margins (OEE, Yield, Retest) improvement initiatives

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

We’re looking for a motivated and dynamic Business Development Executive – Outdoor to join our expanding team. In this role, you’ll strengthen relationships with existing clients while driving new business growth through your strong sales skills and proactive mindset.

In this role you will be responsible for:

• To promote the Company and its products and services to its best advantage under the guidance of Sales Manager, Branch Manager, Area Sales Manager or other Senior Managers.
• To meet agreed sales targets for the Company’s products and services on a regular basis at budgeted price levels or better.
• Maintain extensive knowledge of market and competitors, identify and develop the company’s selling propositions and differentiators.
• To manage day to day sales activities, including proposal, service agreement, prospecting, market development, handling complaints and termination calls.
• Coordinating with various internal departments in ensuring proper execution and delivering outstanding customer service.
• To update daily sales in system and SOP compliances
• All monetary collection shall be returned to the company no later than two (2) days.
• Attend other work related duties as may be assigned to you from time to time.
• Make regular visits to clients’ to build rapport and to conduct presentations and/or premises inspections when necessary.
• Deal with clients’ complaints as a matter of urgency in accordance with company policy.
• Work closely with other team members to assist in collection
• Agile and flexible to perform on-site inspection
• Work closely with other team members to assist in collection

The ideal candidate will possess:

• Minimum a Diploma in related discipline of studies with proven track record in Sales
• Highly successful at converting clients with the ability to adhere to KPI's to ensure success
• Driven by data and building a network of excellent customer relationships
• Ability to work onsite and go on joint visits with Technical and Service colleagues
• Good understanding of Business clients in your designated locations
• Autonomous and thrive on challenges
• Required valid driving license because driving is part of the job requirement for this designation
• Possess own vehicle, is a Malaysian or holds a relevant resident status

Highly Desirable:

• Excellent sales, solutions & negotiation skills
• Ability to reach & exceed sales targets
• Versatility to build rapport with people at all levels
• Multi-lingual in both verbal and written English and Bahasa Malaysia, able to converse in decent clear communication. Ability to converse in other local dialects will be an added advantage
• Commercially focused acumen

We are seeking a talent new college Engineering graduate to join our SWK substrate plant polishing department. The ideal candidate will play a crucial role in optimizing our manufacturing processes, ensuring product quality, and driving continuous improvement initiative

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Process Optimization: Improve manufacturing processes to enhance efficiency, reduce costs, and maintain quality standards.
• Quality Control: Develop and implement methods to ensure products meet specifications and standards consistently. Collaborate with other departments.
• Troubleshooting: Identify and resolve issues in manufacturing processes to minimize downtime and maintain smooth operations.
• Risk Assessment: Evaluate potential risks in manufacturing processes and implement measures to mitigate them, ensuring safety and compliance.
• Continuous Improvement: Regularly review processes and performance metrics to identify opportunities for optimization and implement changes accordingly. Incorporate new technologies, materials, and methods to into existing workflows, enhance manufacturing processes and stay ahead of industry advancements.
• Equipment Optimization: Collaborate with Maintenance and Equipment teams to optimize equipment performance, troubleshoot issues, and implement preventive maintenance programs. Recommend equipment upgrades or modifications to improve efficiency and reliability.
• Documentation: Maintain accurate records of processes, procedures, and changes to facilitate analysis, audits, and continuous improvement.
• Collaboration: Work with cross-functional teams including production, equipment engineering, development, quality, and management to address challenges and implement improvements.
• Training: Provide training and guidance to production staff on new processes, equipment, and procedures to ensure effective implementation and adherence to standards.

The Power Supply Design Engineer is in charge to perform and follow a part of the Power Supply and Distribution design activity with the support of the Power Supply Design Leader.

He/She will have to perform power supply system design, calculation notes, simulations, and calculations to specify electrical equipment for Traction and Power substations and to verify the conformity of suppliers’ design with the Contract Specification. He/She will have to ensure the coordination of design with all other systems and equipment of the project.

He/She will provide design input for system engineering activities such as requirement management, configuration management, system assurance, and EMC studies.

Organisational Reporting

Reports operationally and hierarchically to the Power Supply Design Leader.

Network & Links

Coordination with the Project team, system integration team, consultant, end client, and internal/external stakeholders.

Responsibilities

• Perform power supply system design and detailed engineering for a railway electrification project (high voltage / medium voltage / traction / low voltage).
• Analyze project specifications and requirements.
• Perform simulations using ETAP and SIGNON.
• Review and validate suppliers’ technical drawings and calculations.
• Prepare Bill of Quantity (BOQ).
• Deliver single line diagrams, functional specifications, and technical drawings.
• Prepare design reports and schedules.
• Review suppliers’ offers for compliance with customer requirements.
• Manage coordination, interfaces, and Requests for Information (RFI).
• Coordinate with:
  • Customer, utility, contractors
  • Other subsystems (communication, signaling, trackwork, SCADA)
  • Suppliers, subcontractors, partners
• Prepare construction documentation (cable schedules, cable lists, block diagrams).
• Participate in as-built documentation.

Measurement (Performance Criteria)

• Timely delivery of deliverables
• Quality of documents
• Accuracy of work
• Client satisfaction

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

• Job Summary
  • To ensure smooth execution of back-end, post-sputter processes in compliance to process specification
  • To carry out engineering studies to improve post-sputter processes.
• Essential Duties & Responsibilities
  • To monitor daily process KPOV and KPIV
  • To trigger for process or machine maintenance as scheduled or on ad hoc basis
  • To ensure compliance to operating procedures and process parameters
  • To carry out evaluations for process improvement
  • To ensure quality of parts that leave the process and own up any excursions and action items to mitigate the impact and solve the issue.

Job Summary

• Responsible for 1st level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by Failure Analyzer.
• Responsible for monthly FOR (Fall Off Rate) data entry into FOR database for tracking of FOR and Internal Defect Cost (IDC).
• Prepare rework flow for any non-conformities detected at production line for sorting or rework activities.
• Responsible to follow up and track the status of rejected parts complained to supplier via Purchasing Quality engineer (PUQ).
• Responsible to coordinate measurement support activities for verification of part dimension in order to determine root cause of rejection found in the line.
• Update PVS system (Part Verification System) for setting up part number for barcode scanning activities to avoid missing or wrong items been shipped to customer.
• Support VSE in preparing and update In Process Checklist, Production Work Instruction (PWI), Production Quality Indication (PQI) and Quality Alert for daily production usage.
• Assist VSE in preparation of workstations layout, set up workstation and line release documents before Pre-Pilot run, Pilot Run and mass production.
• Support VSE to perform Machine and Process Capability Study to ensure machines and processes meet the capability requirement during new product introduction and mass production.
• Support VSE in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness.
• Support process improvement project in production through time study - VT improvement, direct productivity improvement, ergonomic, workstation, machine and technology.
• Support production in achieving the effectiveness, output, FOR and quality target through continuous improvement activity.
• Liaise with maintenance personnel for maintenance plan set up and spare parts replacement for existing machine used in production whenever necessary.

Job Scope

• Prepare workstation layout, set up workstation and assist VSE/FPV in preparation of line release documents during pre-pilot run, pilot run and SOP.
• Support VSE/FPV in Machine and Process Capability Studies to ensure new machine and process meet the capability requirement during new product introduction.
• Support VSE in coordination of PDP project sample build (Pre-Pilot and Pilot run) on material availability and jig and fixtures readiness.

 Operation Support

• Responsible for l51 level failure analysis of reject tools or components from production line to identify process or supplier related issue for failures which are unable to be solve by Failure Analyzer.
• Responsible to coordinate measurement support activities for verification of part dimension in order to determine root cause of rejection found in the line.
• Responsible to follow up and track the status of rejected parts complained to supplier via Purchasing Quality engineer (PUQ).
• Responsible for monthly FOR (Fall Off Rate) data entry into FOR database for tracking of FOR and Internal Defect Cost (IDC).
• Support VSE in preparing and update In Process Checklist, Production Work Instruction (PWI), Production Quality Indication (PQI) and Quality Alert for daily production usage.
• Prepare rework flow for any non-conformities detected at production line for sorting or rework activities.
• Update PVS system (Part Verification System) for setting up part number for barcode scanning activities to avoid missing or wrong items been shipped to customer.
• Support production in achieving the effectiveness, output, FOR and quality target through continuous improvement activity.
• Support process improvement project in production through time study - VT improvement, direct productivity improvement, ergonomic, workstation, machine and technology.
• Liaise with maintenance personnel for maintenance plan set up and spare parts replacement for existing machine used in production whenever necessary.
• Coordinate laser marking drawing conversion activity into laser marking machine and ISIR sample submission.

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

Job Summary:
The Sputter Process Technician is responsible for executing process characterization activities, ensuring sputter process meets key performance parameters, and supporting production through process monitoring and adjustments. 

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Perform process characterization for sputter equipment and materials.
• Conduct buy-off by verifying key process input variables (KPIV), including pressure, temperature, and voltage.
• Perform measurements and data collection for characterization samples.
• Monitor key process output variables (KPOV) during production to ensure process stability and product quality.
• Perform process adjustments as needed to maintain specifications and resolve deviations.
• Assist in troubleshooting process and equipment issues to minimize downtime.
• Maintain accurate records of process parameters, test results, and adjustments.
• Adhere to safety guidelines and cleanroom protocols at all times.

About the role 

At SEEK, we’re creating technology that helps people live more fulfilling working lives. As a Level 3 Software Engineer, you’ll design, build, and maintain web applications used by millions. You’ll work closely with designers, product managers, and engineers to deliver high-quality, scalable solutions that enhance SEEK’s platforms.

Reporting to a Senior Engineering Manager, you’ll be part of a collaborative squad that values innovation, learning, and craftsmanship. You will shape technical designs, write clean and efficient code, and mentor team members while driving improvements in SEEK’s engineering practices. Success means delivering impactful features, strengthening performance, and contributing to SEEK’s mission of connecting people with work.

What you will do 

• Build and maintain high-performing front‑end and back‑end applications
• Collaborate with cross‑functional teams to design and refine technical solutions
• Contribute to architecture decisions and technical direction
• Uphold quality through testing, reviews, and documentation
• Enhance developer workflows and CI/CD practices
• Share knowledge and mentor peers in engineering best practices
• Support system reliability and continuous improvement initiatives

As a Senior Equipment Engineer specializing in sputter media, you will be responsible for overseeing the operation, maintenance, and continuous improvement of sputtering equipment used in the production of hard disk media. You will work closely with cross-functional teams to ensure optimal equipment performance, minimize downtime, cycle time improvement and contribute to the development of new processes and technologies.
 
ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Develop and implement preventive maintenance schedules to ensure equipment reliability.
• Monitor and analyze equipment performance data to identify areas for improvement.
• Oversee machine installation, maintenance, and repair of sputtering equipment.
• Conduct root cause analysis for equipment failures and implement corrective actions.
• Collaborate with process engineers to develop and optimize sputtering processes.
• Develop project (equipment upgrades) plans, timelines, and budgets, ensuring projects are completed on time and within budget.
• Provide technical expertise, training, and mentor junior engineers/technicians on equipment operation and maintenance best practices. 
• Ensure all equipment and support systems comply with safety regulations and industry standards.
• Prepare and present reports on equipment status, performance metrics, and project progress to management.
• Document standard operating procedures (SOPs) and best practices for equipment operation and maintenance.
• Work closely with cross-functional teams, including process engineers, production managers, and quality assurance, to achieve production goals.
• Perform other duties as assigned by management.

About You

You will join the SEEK Business engineering team — a self‑contained scale‑up powered by SEEK’s global platform. You will design, build, and maintain full‑stack software that powers Australia’s largest online business‑for‑sale marketplace. Working across TypeScript, NodeJS, React, GraphQL, and AWS, you’ll deliver secure, reliable, and scalable solutions end‑to‑end. You will collaborate daily with product managers, designers, and fellow engineers, contributing to architecture decisions and continuous improvement in DevOps, CI/CD, and automation. Success in this role means shipping well‑crafted code, owning complex technical decisions, and helping the team raise engineering quality while driving rapid delivery.

What You Will Do

• Design and build high‑performance full‑stack applications using modern tech
• Own services through development, testing, deployment, and production support
• Contribute to architecture decisions and continuous delivery improvements
• Collaborate with design, product, and cross‑functional teams to deliver at speed
• Strengthen DevOps culture through CI/CD, observability, and automation
• Ensure reliability and performance of SEEK Business’s platforms
• Share learnings and mentor peers to uplift technical standards

• Develop embedded firmware which run on Bosch products.
• The developed embedded firmware shall base on test requirement from customer, internal engineering and manufacturing.
• The embedded firmware shall be able to interact with manufacturing and engineering test system via physical interface such as Serial, Ethernet, and USB
• Work closely with embedded firmware team in Malaysia and Germany in order to achieve common product development goal.
• Assist global engineering team to perform HW-SW integration bring up during development phases.
• Assist global manufacturing sites in troubleshooting manufacturing related problems.
• Provide postproduction and failure analysis support.
• Collaborate as project team member on Software design matters.
• Capture and evaluate customer, internal requirements and vehicle specific interface requirements. Identify suitable concept in terms of functional, technological and effort.
• Adhere to Bosch Software Engineering Process as e.g.:
  • Perform requirement reviews, design reviews and code reviews.
  • Perform unit testing and release of the software according to SW release process.
• Develop the SW design taking into consideration the dependencies to other module and integration into the overall system.
• SW programming using both standard and proprietary software tools and libraries.
• Create SW test specifications and protocols, if necessary, develop test SW. Executes test plans to ensure new software meets specifications, functionalities and performance requirements.
• Analyze failure logs, clarify system problems and resolve design issues.
• Develop and produce technical reports, design analysis and documentation in support of designs.

Job Summary

• Responsible for new product quality requirement.
• Ensure products manufactured meet product & process quality requirements.
• Customer complaint resolution and product warranty improvement.
• Develop, review and monitor the effectiveness of quality control procedures and processes, propose and implement improvements where necessary.
• Ensure closed loop of internal and external audit finding include product safety audit.
• Monitor and supervise QMM technician performance to ensure efficiency in quality management process.
• Responsible for process improvement project and update Management on the improvement result.
• Responsible for Quality problem resolution through problem solving process PSS/8D.
• Generate and maintain inspection plan for in-process (EQ, FQ) and outgoing (VQ).
• Responsible for component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Monitor, report of KPI’s in timely manner and establish action plan.
• Any other tasks or responsibilities assigned by superior.

Job Scope

New Product Introduction

• Responsibility for – Start up projects, warranty, customer complaint, first article approval (ISIR), reliability testing (QZ), etc.
• New project product qualification test include fulfill the regulation requirement.
• Actively involves in FEP, QG, FMEA, CP and production line release.
• Prepare product test plan, product inspection plan (EP), QZ test plan and FQ/VQ checklist.
• Provide training to QMM test technician on all the related inspection plan and checklist.
• Work with service center to understand the product quality level in the market.
• Coordinate project testing, investigate the failure and ensure close loop of the action implemented.
• Responsible for part release and incoming inspection plan.
• Ensure all ISIR requirements are fulfill before ISIR released e.g. S,F,L, and Cpk > 1.33, etc.
• To ensure measurement methodology alignment between PgP2 and supplier.
• To ensure all related fixture including short endurance for VQ/FQ audit, practical test are ready before pilot.  
• Lead Q-VSM process and ensure fulfillment during pilot stage.

Operation Support / Value Stream Quality

• Responsible for product & process quality in Value Stream, support VSM on product & process quality performance.
• Responsible for quality management in process changes, sorting & rework flow buyoff, concession management, customer complaint management, etc in the Value Stream.
• Responsible for quality management of ALR, product relocation, plant to plant activities, new line/equipment, machine/process parameters/software buyoff, etc.
• Support & drive PUQ on supplier incoming material quality issue disposition and 8D verification and evaluation.
• Support cost saving, 2nd / alternatives source activities and approve alteration change.
• Regular review with production personnel for CP and FMEA.
• Perform failure analysis on customer – warranty complaint tool and drive for improvement to achieve the agreed target.
• Ensure ANDI contents is checked before release and implemented correctly.
• Conduct periodic audits to ensure line and process compliances.
• Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Drive cross functional team for Quality process improvement (e.g. Q VSM, functional test quality gates, MES quality data analysis, etc).
• Responsible for plant to plant quality complaint management.
• Responsible for product transfer on quality measures between plant.
• Responsible for monthly Quality meeting, warranty analysis reporting.

Get to Know the Team

Tech Infra (TI) aims to Deliver Joy and Excellence to Grab engineers by enabling a frictionless ecosystem, allowing focus on value-adding features for users in a fast and safe manner. Some folks and companies would recognise this as a "Platform Engineering Team", and that is what we do.

Get to Know the Role

When you're an engineer at Grab, you are part of the heart and soul of the company. Our passion is anchored in the work that we do, and this is reflected in the impact we make on millions of lives on a daily basis. Grab Engineering is empowered by creating amazing services and tools that serve millions of passengers, driving partners, and fellow Grabbers.

You will report to our Software Engineering Manager, and you will based onsite in our Petaling Jaya office.

We seek independent thinkers who care for their product and own the problems we face day-to-day.

The Critical Tasks You Will Perform

• You will design and implement robust APIs and backend services using Python/Go.
• You will create responsive, user-friendly interfaces using JavaScript/TypeScript.
• You will mentor junior developers and conduct code reviews to foster growth.
• You will build scalable database architectures and optimize query performance.
• You will collaborate with product managers, designers, and stakeholders to deliver features effectively.
• You will lead feature development from conception to deployment, driving technical decision-making.
• You will participate in Agile development processes and contribute to technical documentation and knowledge sharing.

Job Summary

• Responsible for Battery testing (qualification, sample, reliability), documentation, problem resolution and failure analysis.
• Ensure released Battery is fulfilling the internal standards, external product safety and country specific requirements.  
• Perform failure analysis on failed Battery from qualification, testing, QZ, warranty and customer complaints. Drive for problem solving and improvement implementations.
• Review & monitor the effectiveness of the Battery test plans and implement improvements where necessary. Perform & ensure test method alignment between test labs.
• Responsible on the accuracy and competency of test reports generated.
• Support component first article inspection approval (ISIR) and approval on incoming part inspection plan including cost reduction activities.
• Manage and improve software quality processes, including requirement analysis, test case design, and defect tracking.
• Maintain and optimize test documentation in tools like CodeBeamer or SharePoint.
• Establish initial software testing strategy and its quality assurance methodologies, prepare training information package and provide training to quality engineers.

Job Scope

• Testing and qualification: Responsible for conducting testing and qualification of Batteries. Ensure meeting committed date to customer with accurate report.
• Develop, review and monitor the effectiveness of the Battery test plans and implement improvements where necessary. Develop test fixture / adaptor and plan equipment for better testing efficiency.
• Establish work instructions for all equipment and testers, with regular review to ensure validity. Train test technicians and ensure their competencies in performing testing.
• Work with project teams to realize the Battery testing schedule / life cycle.
• Responsible for failure analysis and postmortem on defects by using appropriate tools methodology e.g. 5 Why’s, RCA, FTA. Drive for improvements implementation.
• Provide advice on applicable test method to address root-cause of failure and improvement opportunities.
• Conduct regular and quarter review on defect trend for Battery failures for quality management. Conduct Failure Investigation with cross-functional team for non conformance incidents.
• Perform failure analysis on failed parts (inclusive customer and warranty complaints) and support improvement to achieve the agreed target.
• Conduct periodic audits on lab for lab compliances on functions and safety. Adhere 7S practice.
• Software Quality Assurance, requirement management, documentation & compliance
• Define and implement quality standards for embedded software and related applications in power tools.
• Develop and maintain test strategies, test plans, and test cases for software components, ensuring compliance with functional and safety requirements.
• Analyze software requirements for completeness and testability.
• Manage and track defects using tools like CodeBeamer, ensuring timely resolution and proper documentation.
• Continuously improve QA processes, maintain comprehensive documentation in Share Point for test processes, results, and quality metrics.
• Work closely with development, hardware, and system teams to ensure software quality aligns with product performance and safety standards.
• Any other matters as assigned by Superior to meet the target and deadline.

We are actively driving advanced package technology and developing power package with focusing on next generation technologies for AI data center and automotive. To achieve the rapidly growing demand and expedite release to market of power packages, we are developing such as Power QFN, HSON, HSOT and TOLL. This role offers the opportunity to work on, higher density, lower resistance, higher reliability, and high thermal dissipation package design and develop technologies.

Key Responsibilities

• Design and develop power package and interconnect for Renesas’s packaging needs in the areas of power QFN, HSON, HSOT and TOLL for AI data center and Automotive.
• Work with OSAT/Internal manufacturing especially collaboration with Malaysia and Japan PKG team to develop, run DOE to optimize processes and establish process specification.
• Work with Product groups and QA team to define target of package structure/design, develop new package and processes, and qualify packages within required period.
• Ensure smooth transition into production by establishing robust design and process through the DOE results, verification, and resolving issuesduring development period.
• Develop and maintain technical expertise on advances and innovations in advanced power package design, process, and interconnect that linked and execute pkg roadmap. 

We're looking for an experienced and visionary Principal Engineer, Product Development Engineering to join our dynamic team. In this pivotal role, you will drive the development and optimization of innovative products from conception through qualification, ensuring exceptional quality and reliability. You will lead cross-functional teams, mentor engineering talent, and champion technical excellence while collaborating closely with design, manufacturing, and quality teams to deliver products that exceed customer expectations. This is an opportunity to make a significant impact on product strategy and engineering excellence within a forward-thinking organization.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

• Lead and drive product development initiatives from pre-silicon design through first silicon and full qualification, ensuring alignment with technology and product roadmaps.
• Develop and implement comprehensive test strategies, test flows, and screening methodologies that optimize product quality and reliability metrics for wafer testing. 
• Conduct in-depth electrical and functional failure analysis during new product development and qualification phases, identifying root causes and defining corrective action plans.
• Collaborate with cross-functional stakeholders including design engineers, device engineers, manufacturing partners, and quality teams to resolve complex technical challenges.
• Define and refine product specifications, test algorithms, and stress screening methods based on rigorous data analysis and industry best practices.
• Monitor product quality metrics and reliability performance across product lines, driving continuous improvement initiatives and process optimization.
• Partner with system and firmware teams to develop robust error handling algorithms and enhance overall product resilience.
• Mentor and support junior engineers, fostering a culture of technical excellence, innovation, and collaborative problem-solving.
• Communicate technical findings, recommendations, and strategic insights to senior leadership and cross-functional partners with clarity and precision.
• Manage project timelines, deliverables, and resource allocation to ensure efficient execution and on-time product launches.
• Develop and maintain technical documentation, product specifications, and engineering standards that support organizational goals.
• Champion innovation and process improvement initiatives that enhance product performance and manufacturing efficiency.