Total 75 Procurement Engineer job vacancies in Penang

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

ESSENTIAL DUTIES AND RESPONSIBILITIES:

· Analyze, understand and document development requirements of product designs

· Carry out detailed electronic circuit design, including simulation

· Design and implement electronics design by selecting components, schematic design and perform PCB layout as well as integrate and test the hardware platform.

· Conduct product verification against defined hardware specification, prepare design documentation and support design transition to manufacturing as necessary.

· Assume technical lead role in project as necessary to provide the technical direction, technical decision and risk mitigation.

· Identify opportunity to improve within the functional team and participate in improvement activities.

· Create and maintain BOMs of the new designs

· Select new electronic parts, taking into consideration: obsolescence, availability and cost

· Perform and evaluate costing studies meeting the costing targets

· Liaise with project manager and a cross functional team to produce prototypes.

· Perform design FMEA to reduce risks of performance failures.

· Create & maintain technical documentation (schematics, specifications, performance, and bring-up reports)

· Work in a team for continuous development and improvement of products / parts / firmware.

1. To setup derivative test system for product lines based on test specification (PAV) provided by CoC team accordingly to following requirement:

• To track project budget and ensure equipment cost within the planed budget.
• On time delivery of test systems to the production line according to project milestone (include manage of equipment, hardware interface and mechanical jig and fixture purchase)
• Release the test system according to Test System Release Procedure.
• To train and coach maintenance team to be able to handle test system breakdown more effectively and maintain test system in achieving FOR (NTF related FOR) and OEE target. (eg. Propose Preventive Maintenance plan, analysis tool of breakdown causes, Test System Setup guideline and test fixture and job design concept)

      2. To participate in project meeting to clarify plant/ production requirement on test  
          system.

      3. Responsible on full test implementation according to test procedure according to PAV
          defined by CoC team and achieve defined test coverage, make sure alignment and
          calibration process (such of flashing of memory, tuner alignment/ calibration.) is in line
          with test procedure.

      4. To support line for trouble shooting in test system.

      5. General support on the following:

• To participate in FOR daily meeting, project meeting to monitor daily operation issue test related.
• To upgrade software to the latest DUT software released by ENG.
• To analysis MIS data and coordinate improvement activities on test time reduction and machine efficiency.
• Early involved in new model concept discussion with CoC and TEF7, to ensure smooth handling from new project set up team after SOP.

       6. Any other TEF7 related duties assigned to.

1. To manage the task of Quality Assurance for the products under his/her charge to ensure that the products, leaving the company meet the standards for quality set by the company.
2. To coordinate on corrective action for any quality problem occurring at QA, reliability, and customers.
3. To perform failure analysis on reliability, QA and customer detected defects and generate reports if necessary.
4. To initiate/ participate in quality improvement projects.
5. To assist QA Manager as per required and work towards QA department objectives.

1. To execute semiconductor evaluation activities as specified by NPD1. To execute semiconductor evaluation activities as specified by NPD.

2.  Maintain accurate documentation of process recipes, parameters, and procedures of the evaluation.

3. Prepare reports and presentations to communicate findings

4. Coordinate cross-departmental collaboration necessary to complete and keep to evaluation schedule.

5. Adhere to the operating procedures and observe the safe practices at all time during evaluation activities

• Assist in daily functioning of the Indirect sourcing team.
• Support all 6 categories including Logistics, Machinery & MRO, Facility & Professional Services.
• Assist in running reports and tracking Key Performance Indicators for the group.
• Coordinate and follow-up on assigned tasks.
• Participate in external and internal negotiations along with Category Experts.
• Coordinate with associates from the plant to implement projects to generate savings.

This role is 100% remote and requires 10% travel to WD sites and may include International. 

The Global Commodity Director of Procurement Construction - Real Estate Operation (REO) is a dynamic and results-driven leader who will direct, develop, and implement the necessary functional and process competencies to plan, source, purchase and deliver world-class product. Key activities for this position include, developing category strategies, risk mitigation, market analysis, RFx development, negotiation planning, competitive price and cost analysis, financial analysis, contract development and supplier management. We are looking for a passionate, driven, visionary leader with a track-record of performance.

The Director will work with the various Facility Operations teams, Eng. Teams, and Construction teams that support R&D and Manufacturing along with developing new sourcing strategies. The REO Procurement organization is responsible for assessing, sourcing, and managing WD Real Estate Operation suppliers, supporting WD’s technology and operational requirements globally. 

The incumbent requires to develop and maintain strong collaborative and cooperative working relationships with team members across different functions and at different levels within the organization. The position requires enthusiasm, passion, attention to detail and a desire to lead high-performance teams.

Position Description: Reporting to the Facility & Construction Sr. Director of Global Indirect Materials this person will lead and execute Strategic sourcing Projects, Complex Procurement Programs, and vendor management activities for assigned Facility and Construction categories and projects of low to high complexity scopes.

Responsibilities:

• Act as the business owner for his or her Facility categories, possessing a complete understanding of internal and external variables that impact the business entities. This entails owning forecasting, monitoring, understanding and reporting on the Facility category and construction industry, along with responsibility for driving strategic projects to achieve business objectives.
• Build and maintain (partnering) effective working relationship with assigned stakeholders.
• Ability to review and analyze data to determine sourcing opportunities based on best practice methodologies.
• Develop short-term/long-term category planning for both facility and construction, implement sourcing strategies for assigned categories following a standard strategic sourcing methodology.
• Capable of forming and driving Commercial, Technical bid reviews.
• Drive and develop the RFx process through to completion; including requirements gathering, identifying RFP criteria, scorecards with criteria and weighting, bidder's Proposals.
• Conduct high impact eSourcing events where applicable (e.g., eRFX).
• Capable of Developing and constructing Agreements.
• Solid negotiation skills on both Terms and Conditions plus cost targets (BATNA).
• Full understanding of Total cost of ownership.
• Contribute to the departments KPIs, including driving significant cost savings that contribute to the annual targets
• Help identify areas of risk for the business (i.e., delivery of service, quality, performance, timeline, warranty, governance); make recommendations where applicable.
• Full understanding of Business Continuity as it relates to Facility and Construction.
• Ability to insert oneself into business and recognize areas that require improvement and make recommendations for efficiency gain.
• Partner with key stakeholders and assist in development of approved and preferred vendor lists for assigned categories.
• Lead cross-functional teams to develop requirements and strategy to identify suppliers, establish SLA/KPI requirements. Measure supplier performance against contract SLAs and expectations and initiate corrective actions in the event of missed expectations to resolve any performance issues.
• Drive Supplier Review Meetings with key suppliers and senior level Align stakeholders and provide input on performance and future needs/strategic planning.
• Ability to build and maintain relationships with internal customers / clients as well as vendors.
• Ability to excel under pressure while dealing with changing priorities and timelines.
• Manage compliance to contracts.
• Support savings tracking processes and participates in special projects as needed.

1. Travel estimated 10% 

1. Generate KPI reports and track KPIs
2. To perform test data analysis with IT tools and statistical methods to benchmark test sites or investigate performance of new manufacturing sites
3. Coordinate Bosch internal change management, generate and track engineering change requests for semiconductor products
4. Support new products introduction within our international production network
5. The candidate is responsible for micromechanical automotive sensors in our international production network
6. The candidate is required to manage product data in series production and coordinate product issues at multiple manufacturing locations around the globe
7. Responsible to the monitoring of quality and costs of the products inclusive of planning, controlling and supervising product improvement projects
8. You will lead working groups within the framework of project, yield and quality management
9. The candidate is required to coordinate manufacturing activities of sensor products in an international production network in cooperation with the development and manufacturing departments

About Operations Engineering Division (OED): OED is the central team that supports all Business Unit Design and Development teams, and other organizations including Sales, Marketing, Business Operations, Foundry Operations, and Test.  OED provides a platform for managing all process technology and PDK development for both Internal and External Foundry processes. This strong and highly qualified team (mostly MS/PhD) add strength in developing Test Technology, Foundry Operations, and Yield management. The team’s world class contributions lead to aggressive NPI strategies and continual cost and gross margin improvement.

Duties and Responsibilities:

Cloud based yield tool deployment, Foundry Yield Improvement, Datamining support for fab escalations and yield tool training.

The new hire is expected to:

1. Drive Foundry Defect Density Reduction.
2. Analyze gaps between defect driven yield and actual ATPG yield to improve foundry related process / defect issues for yield improvement.
3. Collaborate with foundry process, PE/TE and foundry technical manager to design foundry DOEs for yield improvement.
4. Work with foundry on the WAT / Inline monitoring.
5. Drive foundry yield and gross margin improvement.
6. Support foundry Excursion/ RMA data analytics and work with foundry managers and QA for hold lot disposition.
7. Support foundry/fab transfer safe launch data analytics.
8. Conduct D0 yield calculation for new projects.
9. Maintain detailed documentation of yield analysis, experiments, and corrective actions for future reference and continuous improvement.
10. Drive PDF data integrity and loading for the foundry projects.
11. Provide PDF Exensio consultations for product/test teams.
12. Build PDF Exensio custom template as needed.

• Coordinates with Central IT department for all Plant IT Infrastructure setup, IT Infrastructure maintenance & IT Infrastructure improvement
• Manage the asset planning, procurement & controlling for all IT Infrastructure equipment
• Planning & controlling of budget for IT Infrastructure
• Coordinates all projects related to Central IT Dept services to our plant
• Responsible for the IT Security planning and implementation in the plant to ensure compliances with the Bosch Central Directives
• Enable highly available IT systems with the best performance while maintaining the highest security standards in plant
• Supports and ensuring conformity for all IT Manufacturing audits in the plant
• Participate & contribute to the success of the Bosch Automotive Electronic Semiconductor Division’s IT Manufacturing organization
• Responsible as the Local Authorization Coordinator (LAC) for plant
• Managing the access administration to MES, SAP & Reporting in plant
• Support the Data Security setup and coordination in plant

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• HAMR (CE) program development in Penang
• Manufacturing improvement projects
• Product improvement iteration qualification

Regular

• Ensure new product/process transfer from GO to Penang and develop with good process control and good reliability performance
• HAMR (CE) program development to meet the performance requirement from HDD.
• Establish unique process HAMR from NPI to mass production, throughput improvement, cost reduction, yield improvement and utilization improvement projects, & ensure no compromise in term of product quality.
• Correspond to process design change iteration for performance improvement, this includes process optimization and tribology qualification.
• Provide general guidance to sputter ME yield/process team on Magnetic & Interface related process/yield issues

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis sure

BROAD FUNCTIONS:

• Ensure smooth process transfer from GO R&D to Penang
• HAMR (CE) program development in Penang
• Manufacturing improvement projects
• Product improvement iteration qualification

Regular

• Ensure new product/process transfer from GO to Penang and develop with good process control and good reliability performance
• HAMR (CE) program development to meet the performance requirement from HDD.
• Establish unique process HAMR from NPI to mass production, throughput improvement, cost reduction, yield improvement and utilization improvement projects, & ensure no compromise in term of product quality.
• Correspond to process design change iteration for performance improvement, this includes process optimization and tribology qualification.
• Provide general guidance to sputter ME yield/process team on Magnetic & Interface related process/yield issues

Irregular

• Support inter-department projects (Back End, TEST)
• Support HDD return failure analysis sure

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.
 

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.
 

Why This Role
The role is based in Penang, Malaysia. As the ideal candidate, you will leverage your technical strength, analytical and problem-solving skills and play a vital role to fuel our growth in Process Engineering. Your role will include improving processes and wafer yields, increasing manufacturing productivity and lowering cost that are key to achieving Fab excellence. Coaching Associate Engineers (AEs) will also be part of your job responsibilities.
 

What You Will Do
▪ Support development and qualification of new processes or add additional modules/features into existing processes.
▪ Support new product introduction from tapeout till prototyping success.
▪ Use process integration and semiconductor device knowledge to troubleshoot and resolve inline measurement and electrical test issues.
▪ Identify and solve line and wafer yield related problems. Lead and drive issues to closure.
▪ Optimize process margins through DOE (Design of Experiments).
▪ Monitor critical inline measurement and electrical test parameters SPC trend and Cpk to ensure production wafers meet the require quality.
▪ Opportunities for job rotation and overseas assignment.
▪ Opportunities to file patents, author technical papers for publication and present at local or overseas seminars.
 

What You Will Need
▪ Masters/Degree in Microelectronics/Electrical/Electronics/Chemical Engineering or Science in Physics/Material Science or related field.
▪ Strong communication skills (interpersonal, oral and written).
▪ Strong analytical, presentation & problem-solving skill.
▪ Able to perform under fast paced and challenging environment.
▪ Good understanding of Semiconductor process and device physics, Statistical knowledge (SPC) and Software (JMP) is a plus.
 

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.
 

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.
 

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.
 

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Malaysia will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Why This Role
The role is based in the GF Malaysia office in Penang, Malaysia. The GF Malaysia office serves as a key hub providing engineering resources to supplement GF’s global fab operations on a real-time basis. Through the monitoring of key production processes, performance metrics and tool uptime, the GF Malaysia team will be able to provide important round-the-clock support for our global manufacturing operations.

As the ideal candidate, you will leverage your analytical and problem-solving skills and play a vital role to fuel our growth in Process Engineering. Your role will span across existing and new Fabs, improving processes and thereby wafer yields, increasing manufacturing productivity that are key to achieving Fab excellence. Coaching Associate Engineers (AEs) will also be part of your job responsibilities.

What You Will Do

• Sustain production line, SPC/FDC (statistical process control / fault detection classification) monitoring, CPK improvement, and troubleshooting support for process and tool issues.
• Support Process CIP (continuous improvement projects) to improve process robustness, cost and capacity efficiency.
• Develop new process recipes for new/existing technologies.
• Improve process performance indices adopting big data analytic, statistical analysis and structured problem-solving methodologies.
• Work with cross functional teams, cross fabs and OEM suppliers for BKM (best known method) convergence on recipes, material, method and I4.0 automation.
• Support company's production ramp schedule by process qualification, productivity improvement and new tool release.
• Provide training and guidance to Associate Engineers (AEs) to support day-to-day operational requirements.
• Opportunities for job rotation and overseas assignment.
• Opportunities to file patents, author technical papers for publication and present at local or overseas seminars.

What You Will Need

• MS/BS in Chemical Engineering, Electrical/Electronic Engineering, Mechanical Engineering, Materials Science Engineering, Chemistry & Physics and other relevant qualification.
• Good team player, able to work independently, resourceful, willing to learn new skills with good initiatives.
• Strong communication skills (interpersonal, oral and written).
• Knowledge in big data analysis and use of AI/ML, coding like python is a plus.
• Knowledge in wafer fabrication is a plus.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Malaysia will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.

Introduction to GlobalFoundries
GlobalFoundries (GF) is one of the world’s leading semiconductor foundries and the only one with a truly global footprint spanning three continents. We manufacture complex, feature-rich integrated circuits that enable billions of electronic devices. At GF, we make things that matter — from the solutions that enable the way we live today, to the technologies that drive what’s possible for tomorrow. Join us in changing the industry that is changing the world. For more information, visit www.gf.com.

Why GF
Be a part of our global team that is at the forefront of providing cutting-edge global technology solutions. We are seeking candidates with a strong passion for new technologies and advanced manufacturing, as we continue our Industry 4.0 Digitalization journey using technologies such as Artificial Intelligence and Machine Learning, robotics, big data analytics and more.

Your work will have a direct impact in our expanding Fab Operations, in building out our platforms of purpose-built technologies such as smart mobile devices, personal computing, home and industrial IoT, automotive and more. You will have access to the latest technological developments at GF Labs, with opportunities for patent submissions, presenting your ideas on a global platform, and enjoy GF-wide collaboration across our fabs and offices around the world.

Why This Role
The role is based in the GF Malaysia office in Penang, Malaysia. The GF Malaysia office serves as a key hub providing engineering resources to supplement GF’s global fab operations on a real-time basis. Through the monitoring of key production processes, performance metrics and tool uptime, the GF Malaysia team will be able to provide important round-the-clock support for our global manufacturing operations.

As the ideal candidate, you will leverage your analytical and problem-solving skills and play a vital role to fuel our growth in Process Engineering. Your role will span across existing and new Fabs, improving processes and thereby wafer yields, increasing manufacturing productivity that are key to achieving Fab excellence. Coaching Associate Engineers (AEs) will also be part of your job responsibilities.

What You Will Do

• Sustain production line, SPC/FDC (statistical process control / fault detection classification) monitoring, CPK improvement, and troubleshooting support for process and tool issues.
• Support Process CIP (continuous improvement projects) to improve process robustness, cost and capacity efficiency.
• Develop new process recipes for new/existing technologies.
• Improve process performance indices adopting big data analytic, statistical analysis and structured problem-solving methodologies.
• Work with cross functional teams, cross fabs and OEM suppliers for BKM (best known method) convergence on recipes, material, method and I4.0 automation.
• Support company's production ramp schedule by process qualification, productivity improvement and new tool release.
• Provide training and guidance to Associate Engineers (AEs) to support day-to-day operational requirements.
• Opportunities for job rotation and overseas assignment.
• Opportunities to file patents, author technical papers for publication and present at local or overseas seminars.

What You Will Need

• MS/BS in Chemical Engineering, Electrical/Electronic Engineering, Mechanical Engineering, Materials Science Engineering, Chemistry & Physics and other relevant qualification.
• Good team player, able to work independently, resourceful, willing to learn new skills with good initiatives.
• Strong communication skills (interpersonal, oral and written).
• Knowledge in big data analysis and use of AI/ML, coding like python is a plus.
• Knowledge in wafer fabrication is a plus.

GlobalFoundries is an equal opportunity employer, cultivating a diverse and inclusive workforce. We believe having a multicultural workplace enhances productivity, efficiency and innovation whilst our employees feel truly respected, valued and heard.

As an affirmative employer, all qualified applicants are considered for employment regardless of age, ethnicity, marital status, citizenship, race, religion, political affiliation, gender, sexual orientation and medical and/or physical abilities.

All offers of employment with GlobalFoundries are conditioned upon the successful completion of background checks, medical screenings as applicable and subject to the respective local laws and regulations.

To ensure that we maintain a safe and healthy workplace for our GlobalFoundries employees, please note that offered candidates who have applied for jobs in Malaysia will have to be fully vaccinated prior to their targeted start date. For new hires, the appointment is contingent upon the provision of a copy of their COVID-19 vaccination document, subject to any written request for medical or religious accommodation.