Total 72,964 Process Engineer job vacancies in The United States of America

Responsibilities:

• To provide engineering support for production operation in addressing any product quality issues and process quality issues.
• To continuously analyse product or equipment specifications and performance requirements for process improvement activities such as mould design, process design, and equipment design.
• To participate in cross functional team that design, fabricates, tests and review new product and existing product.
• To review and ensure proper control of documentation for existing and new product or engineering change (ECO/PCN) and conduct proper handover training for production.
• To support New Product Introduction (NPI).
• To coordinate entire process and product flow from development stage (FA) to mass production.
• To plan and organize resources for all projects to ensure that it is being effectively executed.
• To prepare, compile and analyse design test data to establish performance standards for new product and/or existing modified product.
• To review and finalise control plan related to casting processes and any other documents/samples prior to customer submission.
• Support in any additional task as and when required by the superior.

Requirements:

• Degree in Industrial, Mechanical, Materials or Metallurgical Engineering or equivalent.
• Min 3 years’ experience in die-casting or similar industry.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities

Job Description;

• Designs and implements systems and equipment procedures used manufacturing facilities.
• Testing and monitoring equipment.
• Updating current system processes.
• Conducting risk assessments.
• Complete other tasks assigned by superior leaders (including China)

Requirement;

• College degree or above, science and engineering majors are preferred.
• With factory quality engineering or quality management, 2 Years of work experience.
• More than one year working experience in electronic products or auto parts or magnetic device manufacturing enterprises is preferred;
• Have good analysis and judgment ability, problem-solving ability, strong logical thinking ability, quick thinking, able to do things, good at communication, team spirit, able to bear pressure;
• Familiar ISO9001,learn IATF 16949 priority;
• Good English reading, writing and communication skills, Cantonese or Chinese is preferred;
• Candidates fluent in Mandarin is a must as role requires candidate to deal with Mandarin speaking customer.
• Diligent work attitude, strong sense of responsibility, and team spirit.
  
  

Benefits:

• Free parking
• Meal allowance
• Petrol allowance
• Attendance allowance
• Opportunities for promotion
• Professional development
• Overtime pay
• Yearly bonus

職責：

• 為生產營運提供工程支持，解決任何產品品質問題和製程品質問題。
• 持續分析產品或設備的規格和性能要求，以進行模具設計、製程設計和設備設計等製程改進活動。
• 參與設計、製造、測試和審查新產品和現有產品的跨職能團隊。
• 審查並確保對現有和新產品或工程變更 (ECO/PCN) 的文件進行適當控制，並對生產進行適當的移交培訓。
• 支援新產品推出 (NPI)。
• 協調從開發階段（FA）到批量生產的整個流程和產品流程。
• 規劃和組織所有專案的資源，以確保其有效執行。
• 準備、編譯和分析設計測試數據，為新產品和/或現有改進產品建立效能標準。
• 在客戶提交之前審查並最終確定與鑄造工藝相關的控制計劃以及任何其他文件/樣品。
• 根據上級的要求，支援任何其他任務。

要求：

• 工業、機械、材料或冶金工程學位或同等學歷。
• 至少 3 年壓鑄或類似行業經驗。

津貼和福利

• 員工股權
• 佣金和獎金
• 津貼（旅費、交通費等）
• 醫療保險
• 個人發展機會

 1.Job Description
-Operate plant equipment and machinery.

-Data Key In.

-Ensure products are made according to quality, quantity and specification.

-Follow work instructions, company policies and procedure.

Skill, Knowledge & Personal Attributes
-Basic computer literacy

-Good attitude

-Able to work as rotate shift

 
 Education & Experience
-Preferable have working experiences in food manufacturing

Perks & Benefits

• Yearly bonus
• Allowance (travel stipends, transportation, etc.)
• Free Parking

• Analysis and improvement of production improvement in the production department;
• Improve the production process and product performance, and formulate corresponding work instructions; Departmental lean production organization to promote work
• PCB board design review, process plan confirmation, development and verification
  Cause analysis, treatment and prevention of defective products such as internal and external inspections and customer complaints;
• Familiar with the process development process of electronic products, with innovation ability, communication ability, planning ability, analysis and judgment ability, improvement ability
• Familiar with relevant office software, and have a preliminary grasp of the use of PRO-E drawing software
• Familiar with production process control methods and quality analysis and control tools; proficient in process improvement tools;
• Familiar with SMT, plug-in, wave soldering, testing and other production processes, and know the process control points
• Familiar with the improvement and improvement of electronic product technology, tooling and fixtures, quick thinking, strong ability to analyze and deal with production process problems
• Have a strong ability to analyze and deal with production technical problems, be able to work independently, formulate standard operating specifications SOP, train and guide production line employees
• College degree or above, major in electronics, electrical, and communication, with more than one year of relevant experience
• Understand the management standards of process work series, program documents, and product quality, safety and environmental protection standards
• Able to work independently, write PFMEA, SOP, train and guide production line staff
• Possess strong communication, coordination and execution skills, a high degree of professionalism, a positive and optimistic work attitude, good at interacting with people of various personalities.
• Fresh graduated are welcome.

Perks & Benefits

• Open culture, company weekly sport days, teambuilding events, company events organization 
• Internal & External training for career path growth 
• Free employees parking with security

This position can apply to Automation & Granulation & Extrusion & Plastic Injection & Assembly Workshop.

该职位开放给自动化、造粒车间、挤出车间、注塑车间、装配车间的申请。

Responsibilities

• Arrange reasonable manufacturing planning according to production orders and complete manufacturing tasks on time.
• Coordinate with other engineers, suppliers, and assembly teams to ensure machines meet OEE targets.
• Establish technical manuals, drawings, models, training documentation, preventative maintenance plans, and troubleshooting guides for newly established automated equipment/processes.
• Work with automation suppliers for design reviews, research, installation, and troubleshooting of parts.
• Examine the manufacturing management in the workshop and the implementation of the manufacturing technical documents.
• Responsible for coordinating new product pilot manufacturing.
• Responsible for the maintenance of mold and fixtures in the area of responsibility
• Participate in the trial production, testing, and review of new products, materials, and molds.
• Ensure records are adequately maintained, updated, and traceable per ISO 13485 requirements.
   

Requirements

• Prefer Mechanical Engineering/ Polymer Engineering or another related field.
• Ability to work independently and under pressure, good team spirit, strong interpersonal skills, adaptability, and good communication and presentation skills.
• Candidates fluent in Mandarin are preferred as the role requires the candidate to deal with Mandarin-speaking colleague
• Fresh Graduates are encouraged to apply!
   

Perks & Benefits

• On-the-job training will be provided
• Medical Benefits
• Incentive Allowance
• Seniority Reward
• Year-end salary adjustment
• Year-End Bonus
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Company trips
• Personal leave
• Open culture
• Personal development opportunities

Responsibilities:

• Installs, maintain and repairs Automatic Identication Data Capture equipment,  such as Thermal Transfer Printer(Deskotp, Table-top, Mobile), Handheld Scanner, Mobile Scanner/Terminal, and other related products onsite or offsite.
• Study blueprints, schematics, operator & service manuals, and other specifications to familiarise installation & servicing procedures.
• Setup or oversee installation of equipment according to manufacturer's specifications.
• Operates & demonstrate equipments to End Users
• Perform End User Training upon equipment installations
• Deal with Customers (End User or Engineer) when service or support is required
• Consult with engineering personnel to resolve unusual problems in system operation and maintenance.

Requirements:

• Possess at least DiplomElectronics or equivalent field.
• a Engineering, Those without Diploma but have relevant work experience is encouraged to apply
• Fresh Graduates are encouraged to apply as we provide On-the-Job Training
• Proven work experience as field service technician (if any)
• Basic knowledge on equipment control and troubleshooting methods/skills.
• Excellent analytical and problem solving skills.
• Customer oriented and effective communication skills.
• any related work experience with Thermal Printer or Scanner such as Sato, Zebra, Honeywell, OKI, Epson, Citizen, etc is added advantage

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Car Allowance
• Full Petrol, Toll & Parking Claims
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Open culture
• Personal development opportunities
• Yearly Bonus & Incentives
• Yearly Salary Review

This is a full-time role for a Sales Support Engineer, stationed in Kuala Lumpur, responsible for providing sales and technical support to customers, as well as preparing and delivering technical presentations. To  identify new opportunities of sales and marketing activities .Technical back groud with semiconductor knowledges preferred .

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Central location
• Casual dress code
• Personal leave

Mob Date: 18/04/2024

Demob date: 09/05/2024

Duration: 3 weeks

Location: PFLNG2

Mob From: Kota Kinabalu

Responsibilities:

• Set up WirelessHART communication for multiple instruments using AMS TREX.

• Connect wireless UT sensors to the caliperay and repeaters and configure them for data transmission.

• Ensure antenna is installed with the optimal signal reception.
• Establish cable connections between antennas and the Emerson Gateway.
• Integrate the Gateway with the WirelessHART network.
• Together with the execution team for the installation and troubleshooting
• Ensuring compliance with specifications, codes or requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Ensuring all activities necessary to guarantee the design of a 'safe' plant are performed.
• To assist in troubleshooting electrical equipment failures and recommend solutions to avoid recurring issues.
• Submission UAUC Report. ( 1 UAUC per day)

CRITERIA

• Local Sabahan / Valid Sabah work permit
• OGSP
• Medical Offshore
• Bosiet
• CIDB
• Full dose of vaccination c/w booster
• WAH
• Related Certificates

Perks & Benefits

• Employee equity
• Casual dress code
• Open culture
• Personal development opportunities

Location : Johor, Kuala Lumpur and Penang Candidates Wanted 

Job Requirements

• Candidate must possess at least Diploma/Advanced/Higher/ Graduate Diploma in Engineering (Mechanical) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Willing to learn.
• Requires relevant semiconductor / mechanical / pcb industry experience
• Required language(s) : Chinese, English, Bahasa Malaysia.
• Preferable Chinese Speaking candidates.
• Fresh graduate are welcome to apply.
• Ambitious, Self-Motivated, Team Work and Independent.
• Coordinate and work with colleagues to meet and achieve target.
• Possess own transport and willing to travel.
• Able to start work immediately.
• Can work with minimum supervision.
• Have knowledge in machinery is an added advantage.
• Position available in Johor, Penang, Kuala Lumpur.
• Flexibility and willingness to travel frequently to assigned locations, including Kuala Lumpur, Penang, Singapore, and Indonesia.

Job Responsibility

• Provide on-site technical support to customers in various locations, including Kuala Lumpur, Penang, Singapore, Indonesia, and other assigned areas.
• Conduct technical training for the machines we sell to enhance understanding of product features and performance.
• Respond to service requests promptly, troubleshoot machine issues, and deliver effective solutions.
• Collaborate with the sales team, offering technical support to ensure customer satisfaction with our products.
• Maintain close communication with customers, building positive working relationships to foster customer loyalty.
• Attend to sales enquiry & achieve sales target.
• Gather and record customer feedback, providing product improvement suggestions to the research and development team.
• Participate in the development of maintenance plans to ensure optimal performance of equipment.
• Contribute to the expansion of our customer base by actively participating in efforts to acquire new clients.
• Complete reports assigned by the headquarters, including but not limited to detailed records on technical support, customer feedback, and sales trends.
• Provide quotations to customers and recommend suitable equipment based on their needs.
• Prepare and deliver technical proposals explaining products & services to customers.
• Purchase of spare parts or equipment.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Central location
• Casual dress code
• Company trips
• Work visa sponsorship
• Personal leave

Requirements : 

• Bachelor's degree in engineering or related field.
• Valid engineering license - CIDB or NIOSH.
• 2 years field and project planning experience.
• Proficiency in design and visualization software and excellent computer literacy.
• Ability to work with multiple discipline projects.
• Strong project management and leadership skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practises.
• Must posses own transport and be willing to travel. 

Job Responsibilities : 

• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Assign responsibilities and formulate project paramaters to the project team.
• Interact with clients to interpret their needs and requirements and represent them in the field .
• Perform quality control tasks and report on project status.
• Cooperate and communicate with project participants to maintain profitability and efficiency.
• Develope equipment specifications.
• Ensure compliance with applicable codes, practises, policies, standards, and specifications.
• Generate Gantt Chart, S-Curve, and Project Pipeline Schedule.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel, sports, transportation, etc.)
• Company trips
• Medical insurance
• Personal development opportunities

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management. 
• Determines project responsibilities by identifying project phases and elements; 
  assigning personnel to phases and elements; reviewing bids from contractors. 
• Determines project specifications by studying product design, customer 
  requirements, and performance standards; completing technical studies; preparing cost estimates. 
• Confirms product performance by designing and conducting tests. 
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements. 
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems. 
• Controls project plan by reviewing design, specifications, and plan and schedule 
  changes; recommending actions. 
• Controls project costs by approving expenditures; administering contractor contracts. 
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions. 
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations. 
• Maintains project data base by writing computer programs; entering and backing up data. 
• Maintains product and company reputation by complying with federal and state 
  regulations. 
• Contributes to team effort by accomplishing related results as needed.

JOB REQUIREMENT 

• Requirements Analysis
• Design Skills
• Project Management
• Manufacturing Methods and Procedures
• Process Improvement
• Technical Understanding
• Documentation Skills
• Safety Management
• Supervision,
• Knowledge of CAD, CAD/CAM Circuit Design

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.

Responsibilities:

• To assist the Project Manager to monitor and supervise the construction works at the project site, to ensure it meets the requirements in term of cost, quality and time.
• To review construction drawings and carry out valued engineering.
• To co-ordinate with Authorities, Consultants and Sub-contractors.
• To prepare daily site reports and correspondence.
• To do site inspection to check on quality of works/progress of works/ defect inspection.
• To attend project site meeting to ensure project schedule is adhered to, problem and defects are attended to.

Requirements :

• Candidates must possess Degree/ Diploma in Building or Civil Engineering.
• Minimum 1-2 year working experience.
• Able to plan and lead sub-contractors on day-to day operation.
• Strong communication skills.
• Must be a team player, able to work hard and independently.

Perks & Benefits

• Commission and bonus
• Casual dress code

Job Highlights

We provide a growing platform in terms of Site Experience,

Grow Technical Improvement Guides & Skill Enhancement Training

Less Hierarchy Level, Less Office Politic

We are hiring for multiple work locations, do apply for further discussion. 

Job Description:

• Prepare Schedule for the flawless execution of assigned projects.
• Keeping the project on schedule, on budget and within the specifications.
• Develop costing for assigned tender with resourceful idea or proposal.
• Liase with supplier/ vendor/ contractors with acknowledgement of direct superior
• Ensure the material to be onsite as per target date
• Site coordination among consultant, client, supplier, vendor and contractor
• Communicate with client/ owner/ end use effectively with proper understanding by interpret their needs and requirement.
• Plan, coordinate and compile engineering design work with client/ designer/ consultant/ contractor
• Engineering drawing preparation
• Prepare site progress report as per project requirement.
• Prepare Method of Statement for the construction work
• Plan and arrange for testing and commissioning of the project to meet specification and requirement.
• Ensure all aspects of the project proceed while adhering to internal company SOPs as well as external regulations and laws
• Prepare handover documents once the project completion.

Job Requirements:

• Posses Degree certification in Electrical / Mechanical or Civil Engineering or equivalent
• Preferrable with 1-2 years of construction line working experience
• Have experience in project sites 
• Able to work with minimum supervision

Perks & Benefits:

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities