Total 73,283 Automation Engineer job vacancies in The United States of America

·        Undertaking technical and feasibility studies including site investigations.

·        Liaising with clients and a variety of professionals including architects and subcontractors.

·        Resolving design and development problems.

·        Managing budgets and project resources.

·        Scheduling material and equipment purchases and deliveries.

·        Making sure the project complies with legal requirements, especially health and safety.

·        Assessing the sustainability and environmental impact of projects.

·        Ensuring projects run smoothly and structures are completed within budget and on time. 

·      Considering budget, regulations and environmental hazards during risk-analysis stage

·      Forecasting design and construction timeline.

·      Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages.

·        Analyse bar bending schedule and monitor installation of rebar on site.

·        Immediate join candidate to locate at Gua Musang site.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)

·        Undertaking technical and feasibility studies including site investigations.

·        Liaising with clients and a variety of professionals including architects and subcontractors.

·        Resolving design and development problems.

·        Managing budgets and project resources.

·        Scheduling material and equipment purchases and deliveries.

·        Making sure the project complies with legal requirements, especially health and safety.

·        Assessing the sustainability and environmental impact of projects.

·        Ensuring projects run smoothly and structures are completed within budget and on time. 

·      Considering budget, regulations and environmental hazards during risk-analysis stage

·      Forecasting design and construction timeline.

·      Completing and submitting all permit applications to the appropriate agencies and ensuring projects are compliant throughout the design and construction stages.

·        Analyse bar bending schedule and monitor installation of rebar on site.

·        Immediate join candidate to locate at Gua Musang site.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)

Requirment / Scope:

• Installation of electrical system/extra low voltage system (CCTV/ alarm) 
• Candidate must possess at least Primary/Secondary School/SPM/"O" Level in any field.
• Required language(s): English, Mandarin, Bahasa Malaysia
• No work experience required.
• On job training
• Preferably Entry Level specialized in IT/Computer - Network/System/Database Admin or equivalent.
• Own transportation required

http://www.stssb.com/
Installation of electrical system/extra low voltage system (CCTV alarm)

Perks & Benefits

• Employee equity
• Personal leave
• Personal development opportunities

1. Job Description:

• Assist in tender costing & proposal preparation
• Prepare, review, and submit engineering documents and drawings
• Material procurement and subcontract evaluation
• Procurement & organize material delivery scheduling
• Project planning, execution, and reporting
• Perform inspection, rectification, testing, and commissioning for installation works
• Liaise with clients, authorities, subcontractors, and workers for project-related tasks
• Maintain company’s management and EHS system at the project site
• Any other ad-hoc duties as required

2. Job Requirements:

• Ability in drafting M&E services with AUTOCAD
• Ability in Electrical system designing in compliance with Malaysia Standard (MS) &
• British Standard (BS)
• Project Management skill
• Candidate must possess at least a Bachelor’s Degree in Engineering recognized by the Board of Engineers Malaysia (BEM)
• Application is open for candidates with min 5 years of experience
• Knowledge of Renewable Energy will be an added advantage

Perks & Benefits

• Employee equity
• Commission and bonus
• Central location
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Personal leave
• Open culture
• Personal development opportunities

Job responsibilities:
- Establishing new and maintaining existing relationships with customers.
- Managing and interpreting customer needs and requirements.
- Prepare costing, quotation and negotiating tender and contract terms.
- Negotiating and closing sales by agreeing terms and conditions.
- Offering after-sales support services.
- Market and promote company’s product and services.
- Preparing reports for head office and meeting regular sales targets.
- To receive and process all invoices, expense forms and requests for payment.
- Provide technical training/ presentation to customer for company’s or product introduction.
- Having experience in equipment sales (Industry Air Compressor) and servicing line will be an added advantage

Requirements:
-Minimum Certificate or Diploma in Sales & Marketing/ Business or SPM with 2 years working experience in sales.
-Experience in equipment industrial sales.
-Computer literature (Microsoft Words, Excel. Powerpoint) and a fast learner
-Aggressive in sales and marketing
-Excellent in communication and good interpersonal skills.
-Able to work independent with minimum supervision to meet sales target.
-Hardworking and trustworthy.

Perks & Benefits

• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Central location
• Flexible working hours
• Casual dress code
• Free snacks / Happy hours
• Regular team activities
• Personal leave
• Personal development opportunities

Civil Engineer 

• Liaise and coordinate with contractor, clients & authority.
• To produce details design of sewerage, water supply, earthworks, road and drainage.
• To attend pre-consultation with authority for civil design works
  Structural Engineer.

Structural Engineer

• Perform structural analysis/ calculation and design for various building and structural works.
• Provide technical expertise for building construction projects with full responsibility for interpreting, organizing, executing and coordinating technical assignments, ensuring that standards and procedures are adhered to and recommending process improvements.
• Scrutinise accuracy of calculations, drawings and reports and ensure quality standards are adhered.
• Cooperate and work closely with other engineers & drafter.
• Delivering projects to the required quality, timeline and budget.
• Liaison with third party engineering firms on tasks involving non-standard engineering issues and collaborates with project team to resolve problems by contributing significant new designs and techniques.

Perks & Benefits

• Nearby public transport
• Medical insurance
• Team Building

Job Responsibilities:

• To provide remote IT support on copier related issues via phone, live chat and email.
• Responding in a timely manner to service issues and requests.
• Providing technical support across the company (in person or over the phone)
• To diagnose and troubleshoot LAN/WAN network operating system, software and hardware.
• To configure and install drivers into PCs, Laptops, Smartphones to support copier printer, scanner function & scan to email function.
• To identify and resolve copier printer scanner issues on Window 10, Mac Operating Systems.

Job Requirements:

• Diploma / Advanced Diploma in IT
• Good communication skills
• Good knowledge and experience in general IT infrastructure, desktop / network management
• Multi-task efficiency
• Preferably at least 1 year of working experience in IT support

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Central location
• Medical insurance
• Open culture

Duties and Responsibilities:

1.      Fully understand the technical concepts being offered by the Group of Companies (GoC) in Green Energy Solutions (GES) (i.e. Renewable Energy, Energy Efficiency, Energy Storage, Electric Mobility, etc.) especially Solar PV Systems, Battery Energy Storage Systems (BESS), EV charging infrastructure, etc.

2.      Participate in proposal preparation, quotation, costing process/evaluation (if applicable) and participate in tender preparation and communicate with customer clearly in person and via official communication channels.

1.      To efficiently & effectively develop, manage and monitor investment projects such as GES (RE/EE/EV) investments for GoC  (exclusively for Solar PPA/EE EPC only).

2.      Maintain/manage a good relationship with Key Account Client (KAC) and help work closely with Project Team to resolve operational related matters (when necessary) to ensure a high-performance level is constantly maintained with KAC to position the GoC for obtaining more constant project leads which will be converted to sales revenue.

3.      Develop new relationship with potential new Key Account Client (KAC) by engaging on educating/perform marketing activities (i.e. New Product/Technology or Case Study presentation) to develop business opportunities  (i.e. new project to solve specific technical problem with the GoC’s technological solution). The end goal is to secure the potential KAC to be a permanent KAC after securing a project which contributes to the Group’s revenue and profitability.

4.      To understand the concept of promoting the GES solutions (offered by GoC) for different types of application across different industries. (For any assistance, employee shall seek training needs from supervisor or company subject experts (internally/externally).

5.      Gather customer business short/medium/long term needs/requirements to tailor the right solution with GoC’s  products & solutions to help the customer succeed in its project goals.

6.      To be aware of company’s/department’s Annual KPI (i.e. target revenue and profit) and stay on track. To discuss on solutions and challenges at any time to ensure alignment with all stakeholders to achieve KPI.

7.      To be aware of and counter the competitor’s threats in the market by educating the customer on GoC's key values and benefits during face to face presentation or during tendering.

8.      To always ensure that the key line of communication between client and GoC’s representatives is clear and declared as soon as possible (even when there are changes), this includes being the intermediary between the Project Team/Legal Team and the Client.

9.      Facilitate & discuss (with internal departments) strategy during tendering and Asset Management in order to meet the client goals (i.e. project delivery timeline, tender target price, technical solutions, client expectations, QHSE goals, etc.) 

10.  To always be up to date on the latest Strength/Weaknesses/Opportunity/Threats (SWOT) and engage with internal peers to help educate others on GoC’s key values and benefits in all its offerings when compared to external competitors.

11.  Update project status on a weekly basis in the tracking system as well as update the Supervisor/Manager on the current status of each Asset to Manage and/or Tender/Quotation being prepared.

12.  To research (latest industry trends, electricity industry regulations, etc.) and share knowledge on any changes required on GoC solutions for various applications with different clients and market segments when external law, regulations, environment, competitor activity develops against the GoC’s status quo.

13.  To perform & manage any other ad-hoc duties/tasked matters as assigned by the supervisor/management/manager.

Qualifications & Experience

• Power system and automation, power electronics and transmission, control engineering, electrochemistry and other related majors, with more than 3 years of project experience and a bachelor's degree or above.
• Familiar with new energy, electrical integration or photovoltaic related technologies, and can prepare system integration plans that meet project needs. Applicants with project experience in the photovoltaic or energy storage industry are preferred;
• Have good logical thinking, rigorous problem analysis ability, and quick learning ability; be diligent, proactive, strong in pressure resistance, and have keen insight into and capture of industry information

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.

Job Description :

• Prepare project design documents, drawings & budgetary proposals.
• Work in a team to produce coordinated acoustic design with all necessary mechanical, electrical and spatial designs. 
• Project co-ordination and management.
• Attend project meetings.
• Perform site inspections and project commissioning. 
• Overseas Travel for meeting attendance and/or project site visit

Requirements: 

• Possesses at least a Bachelor’s Degree in Engineering. Specialization in Acoustics, Noise & Vibration, Mechanical or Building Services is preferrable.
• At least 2 years experience in Architectural Acoustic, Mechanical Design or Building Services is preferrable. 
• Project  management and site experience with exposure in SE Asia projects is preferrable.
• Knowledge and proficiency in using MS Project, AutoCad, Autodesk will be an advantage.
• Fluency in English Language both spoken and written. 
• Willingness to travel in South East Asia and Asia Pacific regions as and when required.
• Strong initiative, customer-oriented, strong communication and interpersonal skills, able to meet tight schedule.
• Good writing skill and capable to produce professional design/ tender documents.
• Hard working and willing to learn.
  5 days work.
• Candidates with working experience are encouraged to apply. 
  
  

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Nearby public transport
• Central location
• Flexible working hours
• Casual & Smart dress code
• Medical insurance
• Personal leave

Key Responsibilities will include, but not limited to;

• Positive safety and work attitude is essential.
• Set and clearly communicate targets and expectations aligned with site and business objectives.
• Accountabilities for the role include all mine engineering, mine geology, survey and technical services.
• Maintain mine plans, including daily plans, weekly plans, monthly forecasts, yearly budget plans, and LOM plans.
• Routine operational reports will be required, including but not limited to daily, weekly, monthly, mine reconciliation reports, reserve block model/grade reports.
• Preparation of mine designs (pit designs, waste dump designs, access roads, stockpile designs, drainage designs. etc.) and blast designs using the Surpac software.
• Manage day to day relationship with and provide guidance to Mine Operations team.
• Day to day mining contractor management.
• Communication with geologists and other professionals and site management.
• Contractor claim review/validation/verification and management.
• Pit optimization using Whittle.
• Mine cost analysis and alternative project evaluations.

Key qualifications and experience required include the following;

• A tertiary qualification in Mine Engineering
• More than 5 years of mine operations experience in the resources industry
• Excellent communication, organisational and problem-solving skills.
• Strong understanding of Safety Management and a positive approach to implementing and execution of Management Systems.
• Knowledge of Surpac Software and the use of Whittle highly desirable.
• Competent user of Mircosoft Office Products especially Excel, Work and PowerPoint and Access database.

Perks & Benefits

• Employee equity
• Accomodation
• Transportation
• Casual dress code
• GHS / GTL insurance
• Meal allowance
• Panel clinic

Job Highlights

We provide a growing platform in terms of Site Experience,

Grow Technical Improvement Guides & Skill Enhancement Training

Less Hierarchy Level, Less Office Politic

We are hiring for multiple work locations, do apply for further discussion. 

Job Description:

• Prepare Schedule for the flawless execution of assigned projects.
• Keeping the project on schedule, on budget and within the specifications.
• Develop costing for assigned tender with resourceful idea or proposal.
• Liase with supplier/ vendor/ contractors with acknowledgement of direct superior
• Ensure the material to be onsite as per target date
• Site coordination among consultant, client, supplier, vendor and contractor
• Communicate with client/ owner/ end use effectively with proper understanding by interpret their needs and requirement.
• Plan, coordinate and compile engineering design work with client/ designer/ consultant/ contractor
• Engineering drawing preparation
• Prepare site progress report as per project requirement.
• Prepare Method of Statement for the construction work
• Plan and arrange for testing and commissioning of the project to meet specification and requirement.
• Ensure all aspects of the project proceed while adhering to internal company SOPs as well as external regulations and laws
• Prepare handover documents once the project completion.

Job Requirements:

• Posses Degree certification in Electrical / Mechanical or Civil Engineering or equivalent
• Preferrable with 1-2 years of construction line working experience
• Have experience in project sites
• Able to work with minimum supervision
• Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities

Job Description:

• To monitor project quality plan, work program and assist Project Manager in monitoring project cash flow and progressive claim preparation.
• Provide oversight in managing all necessary resources throughout the entire project from start-up through closeout and ensure that owner’s expectation is met.
• Plan, coordinate, supervise and monitor construction works at site & ensure site personnel following of company rules & regulations.
• Prepare quantity for variation order works and quotation.
• Ensure our installation, servicing and / or maintenance works are according to drawing contract specification and work schedule
• To attend site progress meeting, coordination meeting, safety meeting and site inspection
• To attend valuation of progress claim with client and / or consultants’ representative
• Ensure that the day-to-day operations of projects are transitioned effectively to
• Project Managers when work commences in the field.
• Adhere to quotation and tender management policies and practice in performing daily task.
• Obtain necessaries and update documents to ensure availability of documents (e.g: pricing & technical data) for tender submission
• Prepare quotations & proposed drawing as per client’s requirements and standard operating procedures.
• Responsible for on time delivery of all assigned tenders / quotation.
• Keep pricing and other information regarding quotation and tender confidential
• Adhere AUTOCAD drawing as per client requirements

Job Requirements:

• Candidate must possess at least Diploma or Bachelor's Degree in Engineering (Mechanical), Engineering (Electrical/Electronic) or equivalent.
• Required language(s): Bahasa Malaysia, English, Mandarin
• Required Skill(s): Microsoft Office, EXCEL, AUTOCAD, Microsoft Project, OUTLOOK
• Preferably Entry Level specialized in Engineering Construction/Structural or equivalent.
• Fresh Graduate are welcomed to apply!

• Allowance (travel stipends, transportation, etc.)
• Personal leave
• Personal development opportunities
• KWSP & SOCSO
• Medical Insurance
• Company trips

Job Description;

• Designs and implements systems and equipment procedures used manufacturing facilities.
• Testing and monitoring equipment.
• Updating current system processes.
• Conducting risk assessments.
• Complete other tasks assigned by superior leaders (including China)

Requirement;

• College degree or above, science and engineering majors are preferred.
• With factory quality engineering or quality management, 2 Years of work experience.
• More than one year working experience in electronic products or auto parts or magnetic device manufacturing enterprises is preferred;
• Have good analysis and judgment ability, problem-solving ability, strong logical thinking ability, quick thinking, able to do things, good at communication, team spirit, able to bear pressure;
• Familiar ISO9001,learn IATF 16949 priority;
• Good English reading, writing and communication skills, Cantonese or Chinese is preferred;
• Candidates fluent in Mandarin is a must as role requires candidate to deal with Mandarin speaking customer.
• Diligent work attitude, strong sense of responsibility, and team spirit.
  
  

Benefits:

• Free parking
• Meal allowance
• Petrol allowance
• Attendance allowance
• Opportunities for promotion
• Professional development
• Overtime pay
• Yearly bonus

Key Responsibilities will include, but not limited to;

• Positive safety and work attitude is essential.
• Set and clearly communicate targets and expectations aligned with site and business objectives.
• Accountabilities for the role include all mine engineering, mine geology, survey and technical services.
• Maintain mine plans, including daily plans, weekly plans, monthly forecasts, yearly budget plans, and LOM plans.
• Routine operational reports will be required, including but not limited to daily, weekly, monthly, mine reconciliation reports, reserve block model/grade reports.
• Preparation of mine designs (pit designs, waste dump designs, access roads, stockpile designs, drainage designs. etc.) and blast designs using the Surpac software.
• Manage day to day relationship with and provide guidance to Mine Operations team.
• Day to day mining contractor management.
• Communication with geologists and other professionals and site management.
• Contractor claim review/validation/verification and management.
• Pit optimization using Whittle.
• Mine cost analysis and alternative project evaluations.

Key qualifications and experience required include the following;

• A tertiary qualification in Mine Engineering
• More than 5 years of mine operations experience in the resources industry
• Excellent communication, organisational and problem-solving skills.
• Strong understanding of Safety Management and a positive approach to implementing and execution of Management Systems.
• Knowledge of Surpac Software and the use of Whittle highly desirable.
• Competent user of Mircosoft Office Products especially Excel, Work and PowerPoint and Access database.

Perks & Benefits

• Employee equity
• Accomodation
• Transportation
• Casual dress code
• GHS / GTL insurance
• Meal allowance
• Panel clinic