Total 152 Market Research Analyst job vacancies in Engineering category in The United States of America

As the Research Engineer (Equipment/Operations), you are directly involved in tool installation activities for semiconductor process tools. You would need to work proactively to coordinate with the contractor on the ground for the execution and take corrective and preventive actions of lessons learned, due diligently to prevent reoccurrence. You are responsible for performing utilities turn-on after installation is completed. You must perform the activities per ASTAR site procedure and safety policies to ensure all tool-install-related activities are completed, meeting safety, quality, schedule and budget requirements. You will also be required to perform other activities such as operations for the different semiconductor modules (Diffusion, Litho, Dry/Wet Etch, Thin Film, Implant, etc).

Responsibilities:

• Coordinate with all tool-install base contractors to execute equipment hookup for new tools, to meet the high-quality standards, dynamic schedule, and forecasted budget.
• Coordinate with the Project owner (NGTC/APM) to facilitate utility release as per the planned schedule and update tool release status timely
• Follow all safety and environmental procedures to ensure compliance with EHS-related regulations, risk assessment, safe work procedures, and permit-to-work system.
• Play an active role in safety, actively participating in safety discussions and safe work practices.
• Establish regular area walks to identify opportunities for improved safety, cleanliness, housekeeping and efficiency
• Establish regular, working interaction with peers as well as vendors in tool installation & facilitation, communicating clearly and respectfully all relevant information.
• Keep the reporting officer informed regarding the progress of assigned work and any abnormalities observed in your area.
• Demonstrate ability to understand drawing and highlighting discrepancies
• Follow area-specific procedures and documentation
• Prioritize work tasks to meet schedule and expectations, minimum guidance
• Perform tool tool-relativities and cleanroom systems troubleshooting during the hookup phase
• To perform equipment trouble-shooting of the equipments in NGTC when the need arises
• To perform utility-on after installation completion and to work closely with LCAM for complete closure
• To perform tests balancing of exhaust for new tools whenever necessary
• To perform measures for tool consumption during the hookup phase and to work closely with LCAM
• Use methods to organize, calculate, and display data accurately for utility and flowrate measurement
• Perform site activities in accordance to the Discipline

Requirements:

• Degree/Diploma holders with at least 5 or more years of experience in Mechanical/Electrical/Chemical engineering or equivalent with at least 5 years of relevant experience
• Semiconductor experience (Equipment & Process)
• Facilities field or Wafer Fab Manufacturing equipment background will be an advantage.
• AutoCAD

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

To apply, It will be great if you could share your CV to hoonteck.tan@randstad.com.sg. Alternatively, you can apply at https://lnkd.in/gkNna5yv

• Opportunity to select and implement new ERP solution
• High job stability. Strong profit track record with HQ here in Singapore

About the company

Our Client is a market leader within their industry. As the company continue to invest in IT, they are looking for a new ERP Consultant / Analyst – finance & procurement / supply chain – SAP , Microsoft Dynamics , Oracle or etc to join their team.

About the job

Your responsibility involves:

• Gathering Requirements from stakeholders from various department to comprehensively grasp and document the business needs, with a specific emphasis on procurement, finance, and EAM functionalities.
• Creating a comprehensive RFP package encompassing all business requirements, particularly emphasizing the functionalities of procurement, finance, and EAM modules, alongside other critical criteria for evaluating vendors and products.
• Evaluating Vendors and Products based on business needs
• Proving detailed analysis and recommendation for the most suitable ERP based on business needs and cost
• Collaborate closely with the selected vendor and internal teams to ensure the smooth implementation of the new ERP
• Leading and executing the change management activities for the new ERP migration project. This includes developing the formulation of change strategy to execution of the changes which includes achieving buy-in, managing business change impact analysis and readiness assessment

Skills and experience required
As a successful applicant, you will have proven experience in multiple ERP platforms. Proven track record in selecting and implementing a new ERP is required for this role.

Whats on offer
This is an excellent opportunity to join an established company with exposure to business stakeholder management. You will get the opportunity to lead high value projects with exposure to latest technology.

To apply, It will be great if you could share your CV to hoonteck.tan@randstad.com.sg. Alternatively, you can apply at https://lnkd.in/gkNna5yv (EA: 94C3609/ R1219669)

To apply, It will be great if you could share your CV to hoonteck.tan@randstad.com.sg. Alternatively, you can apply at https://lnkd.in/gkNna5yv

• Opportunity to select and implement new ERP solution
• High job stability. Strong profit track record with HQ here in Singapore

About the company

Our Client is a market leader within their industry. As the company continue to invest in IT, they are looking for a new ERP Consultant / Analyst – finance & procurement / supply chain – SAP , Microsoft Dynamics , Oracle or etc to join their team.

About the job

Your responsibility involves:

• Gathering Requirements from stakeholders from various department to comprehensively grasp and document the business needs, with a specific emphasis on procurement, finance, and EAM functionalities.
• Creating a comprehensive RFP package encompassing all business requirements, particularly emphasizing the functionalities of procurement, finance, and EAM modules, alongside other critical criteria for evaluating vendors and products.
• Evaluating Vendors and Products based on business needs
• Proving detailed analysis and recommendation for the most suitable ERP based on business needs and cost
• Collaborate closely with the selected vendor and internal teams to ensure the smooth implementation of the new ERP
• Leading and executing the change management activities for the new ERP migration project. This includes developing the formulation of change strategy to execution of the changes which includes achieving buy-in, managing business change impact analysis and readiness assessment

Skills and experience required
As a successful applicant, you will have proven experience in multiple ERP platforms. Proven track record in selecting and implementing a new ERP is required for this role.

Whats on offer
This is an excellent opportunity to join an established company with exposure to business stakeholder management. You will get the opportunity to lead high value projects with exposure to latest technology.

To apply, It will be great if you could share your CV to hoonteck.tan@randstad.com.sg. Alternatively, you can apply at https://lnkd.in/gkNna5yv (EA: 94C3609/ R1219669)

We are looking for an energetic and motivated engineer to join our team. In this position you’ll play an important role in helping to develop cutting edge manufacturing technologies, as well in helping companies innovate and grow. And while doing so you’ll have the opportunity to work directly in and understand the industrial environment.

If you are passionate about engineering, process development, operating heavy machinery, advanced manufacturing, materials, and processes, this could be the role for you!

JOB DESCRIPTION

• Provide technical support and conduct process trials/experiments for both research and industry projects.
• Be an integral member of a metal casting team involving the operation of heavy machinery.
• Conduct materials characterization and testing.
• Engage with industry partners, customers and research collaborators to develop and execute plans.
• Provide timely project update and reports to team members, collaborators, and sponsors.
• Perform other ad-hoc roles / tasks as required / assigned.

JOB REQUIREMENT

• Bachelor’s degree in mechanical engineering / Materials Science and Engineering.
• Experience and knowledge in metallurgy, metal solidification and behaviour.
• Knowledge with CAD or SolidWorks is preferred but not required.
• Experience in an R&D environment or related industry is preferred but not required.

These are some of the soft skills we are looking for:

• Self-driven and proactive, apply logic and reason to effectively solve problems and manage risks.
• Team player with the ability to work effectively and independently within the team.
• Welcoming ideas from others and drive processes forward in an inclusive manner.
• Professionalism in communicating and interacting with team members and industry players.
• Attention to detail.
• Keen interest and ability to learn and adapt to new technologies to stay up-to-date and remain relevant.

We are looking for an energetic and motivated engineer to join our team. In this position you’ll play an important role in helping to develop cutting edge manufacturing technologies, as well in helping companies innovate and grow. And while doing so you’ll have the opportunity to work directly in and understand the industrial environment.

If you are passionate about engineering, process development, operating heavy machinery, advanced manufacturing, materials, and processes, this could be the role for you!

JOB DESCRIPTION

• Provide technical support and conduct process trials/experiments for both research and industry projects.
• Be an integral member of a metal casting team involving the operation of heavy machinery.
• Conduct materials characterization and testing.
• Engage with industry partners, customers and research collaborators to develop and execute plans.
• Provide timely project update and reports to team members, collaborators, and sponsors.
• Perform other ad-hoc roles / tasks as required / assigned.

JOB REQUIREMENT

• Bachelor’s degree in mechanical engineering / Materials Science and Engineering.
• Experience and knowledge in metallurgy, metal solidification and behaviour.
• Knowledge with CAD or SolidWorks is preferred but not required.
• Experience in an R&D environment or related industry is preferred but not required.

These are some of the soft skills we are looking for:

• Self-driven and proactive, apply logic and reason to effectively solve problems and manage risks.
• Team player with the ability to work effectively and independently within the team.
• Welcoming ideas from others and drive processes forward in an inclusive manner.
• Professionalism in communicating and interacting with team members and industry players.
• Attention to detail.
• Keen interest and ability to learn and adapt to new technologies to stay up-to-date and remain relevant.

City FM Australia provides world-leading facilities management and engineering solutions that ensure safe, successful and sustainable outcomes for our partner – Coles  The Opportunity: This up to 12-month fixed term role offers an opportunity for a skilled and proactive individual to work as an Energy Analyst within the City FM Energy Centre supporting our partner Coles to achieve their sustainability targets.  The Role:  Investigation and resolution of Energy Event exceptions identified by the City energy management system.   Continuous interrogation of systems to identify energy consumption trends within stores to determine areas of improvement.   Proactively identify innovative energy conservation measures to reduce consumption, demand and cost.   Analyse information, using COMS, site controllers, databases and other systems to present information in various formats (i.e. spreadsheets, charts, written reports.)   Communicating with the field workforce to gather supporting information and achieve desired energy performance outcomes.   Maintain energy usage baselines.   M&V of savings achieved from energy event analysis.   Upkeep records…

Click here to view more detail / apply for Energy Analyst - Building Optimisation Engineer

• Work with stakeholders to understand each department’s business roles and access provisioning processes
• Review the application access matrix and department role matrix.
• Define business roles in identity Management System
• Perform reconciliation in the Identity Management system
• Provide administrative support to IDM team
• Work on BAU issues and resolve issues as per agreed SLA
• Execute queries via BI to generate reports required for daily monitoring.
• Application on boarding into Identity Management Solution
• Work on application access reconciliation and centralized access repository
• Segregation of Duty (SOD) rules maintenance in Identity Management System
• Work with Internal & External Auditors

Requirements:

• 3-6 years of working experience in Identity and Access Management domain.
• 3-6 years of working experience in Database SQL & reporting.
• Knowledge on RBAC (Role Based Access Control).
• Knowledge on Oracle Identity Manager
• Comprehensive knowledge of MS Excel
• Strong verbal and written skills
• Excellent computational ability
• Effective communication skills
• Ability to multitask effectively
• Maintain high level of quality and productivity
• Work independently with minimal supervision

Ensure operational excellence and regulatory compliance in the centre.

Responsibilities:

• Provide operational support in the centre day-to-day and during center events
• Support the organization operations and research need through the workshops/laboratories, offices, building infrastructure and premise security management
• Conduct daily walkabout in the centre to ensure the centre is in good operational condition, uncompromised security and safety compliance
• Ensure a safe working environment within the centre
• Track, maintain and order the operational inventories and maintain a systematic filing system
• Work closely with in-house contractors for facilities feedback to keep the centre in a daily operational state
• Assist in liaising and sourcing of vendor for quotation, equipment, service and monitor the contractor work?s quality, schedule and ensure safety during the execution
• Handle requests and queries from staff and management
• Work together with internal stakeholders/partners to support the entity in center operations
• Assist in executing corporate facilities related projects
• Investigate, check and analyze reported on any workshop and laboratory breakdown
• Facilitate in the facilities related SOPs, Forms and presentation materials
• Perform essential handyman work when needed
• Assist in statutory audit and internal audit
• Any other duties assigned by supervisor

Job requirements

• At least diploma in related field (Facilities / Safety / Operations)
• Minimum 1 to 2 years of relevant experience in operations for workshop, laboratory, facility, building services, electrical and mechanical
• Willing to be scheduled to occasionally work off shift hours in support of operations
• Able to breakdown the assigned work into deliverable tasks and provide realistic timeline for their completion
• Competency in Microsoft Office, AV system. Experience in office outfitting/ relocation projects is added advantage.
• Experience in supervising contractors, facility management and their sub-contractors
• Some understanding in the HS&E requirement
• A self-driven and meticulous individual who has the strong ability to multi-task

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

This position will have responsibility for providing process support and installation of new plasma etch / clean / deposition systems at customer sites. This includes design, evaluation and documentation of process window for new installations or Lam recommended field hardware modifications / upgrades

1. Work closely with Account team and customers to understand customer technology roadmaps, process flow, inflection points, requirements and business issues / challenges. Identify areas where Lam is able to value-add.
2. Work with Account team and customers to execute to penetration and defense strategy, including co-ordinating with Global Product Group on product demonstration
3. Perform startup of “capacity add” Lam systems i.e. match results to existing systems and applications
4. Design and complete simple DOE evaluations to characterize process window for new installations or Lam recommended field hardware modifications / upgrades
5. Conduct experiments and tests, collect and analyze data and generate reports for both internal and external distribution
6. Develop new processes to new and/or existing customer applications
7. Professionally represent the company to the customer. Utilize knowledge of company’s product lines and service to keep existing / potential customers informed when new/additional needs are identified
8. Develop good customer relations during start-up and trouble-shooting
9. Maintain company’s assigned equipment (computer, tool kit, diagnostic test equipment, spare parts etc) in good working condition, secure and accounted for
10. Ensure safe working condition at work site
11. Any other duties as assigned by the Immediate Supervisor

Job Requirements:

1. Engineering degree or Bachelor of Science (in Chemistry / Physics) or equivalent
2. Systematic and has an analytical mind
3. Good communication and interpersonal relations skill
4. Able to actively engage customers on technical solutions
5. Able to work in Fab environment and perform standby duties

Job Description:

We are looking for a highly motivated computational scientist with a deep understanding of chemistry/cheminformatics and structural biology to develop new AI models for ligand discovery. You will be working on a large collaborative project to build up A*STAR’s computational drug discovery capabilities. The candidate is expected to be familiar with the latest generative models. Familiarity with molecular docking programs is a plus.

Job Requirements:

• PhD degree in life sciences, chemistry, computational biology, or a related discipline
• Passion for science and research
• Highly motivated
• Proficiency in the use of machine learning frameworks (e.g. PyTorch, TensorFlow)
• Experienced in developing generative models
• Strong knowledge of chemistry/cheminformatics and structural biology
• Able to work independently and as part of a team
• Excellent written and oral communication skills

The above eligibility criteria are not exhaustive. A*STAR may include additional selection criteria based on its prevailing recruitment policies. These policies may be amended from time to time without notice. We regret that only shortlisted candidates will be notified.

AEMO at the Heart of Energy

We are the Australian Energy Market Operator (AEMO), committed to designing and operating a sustainable energy system that delivers safe, reliable, and affordable electricity and gas. Our mission includes facilitating the transition to a net-zero energy system by 2050, working collaboratively with industry partners to achieve 100% renewable generation capability by 2025. We have the once-in-a-lifetime opportunity to co-design the future of our energy systems, and our core values revolve around Character, Commitment, and Connection. Join us as we contribute to this significant mission in the energy sector.

About the role

Victorian Planning is a division within the System Design department which is focused on efficient planning and development of the Victorian Electricity Transmission Network. Victorian System Integration is a team of engineers responsible for delivering quality network planning analysis and technical advisory services for the Victorian Declared Shared Network to ensure that the investment needed as the power system transitions to achieve net zero emissions can be reliably and securely integrated in the existing network.

As Engineer within the Victorian System Integration team will contribute to the development and maintenance of network asset power system models, including remedial action scheme models, and undertake power system modelling and analysis associated with scoping and delivering network investment, inter-network testing and project integration to deliver safe, secure, and reliable supply of electricity.

What you will be doing

• Responsible for undertaking power system studies, interpreting results, and providing technical advice on matters relating to project scoping, delivery, and system integration.
• Undertake simulation and analysis of the Victorian transmission network using specialised computer simulation tools with a emphasis on steady state and dynamic PSSE simulations.
• Review to provide input to inter-network testing and project commissioning plans to achieve augmentation capacity release.
• Communicating recommendations to both technical and non-technical stakeholders in support of transmission system integration.
• Proactively engage with internal and external stakeholders to ensure consistent messaging across teams, and communicate AEMO position on planning and system integration related matters.

What you will bring to the role

• Industry or related experience in electricity transmission network planning or system integration, and desirable experience in remedial action scheme design and inter-network testing.
• Proficiency in using electricity network analysis tools or relevant software (such as PSS/E), running both steady state and dynamic simulations and interpreting results.
• Good communication skills and proficiency in report writing to communicate key technical advice to a wide audience
• Understanding and knowledge of the physical operation of the electricity transmission system and overarching markets.
• Experience in programming, in languages such as Python and Fortran, will be considered favourably.
• Sound knowledge of the role and functions of AEMO, particularly its Victorian Planning functions, the energy markets and relevant laws, regulations, rules, licences and agreements.

In return some of our benefits to you

• Flexible working: work from home, part time, job share, hybrid options, and additional leave options
• Professional development via projects, industry networks, job rotation, study assistance and more.
• Give back with up to 4 days of volunteering leave per year.
• Reward your hard work with annual performance bonuses (subject to eligibility).
• Embrace a healthier you with our wellness program, discounted health insurance, gym perks and our comprehensive Employee Assistance Program (EAP).

About Our Process

AEMO values diversity and inclusivity in the workplace, welcoming applications from all backgrounds without regard to age, disability, gender, sexual orientation, parental status, race, religion and our First Nation peoples. We are dedicated to accommodating applicants' needs during the application or interview process, simply let the us know by emailing us at talent@aemo.com.au

If you would like to know more about working at AEMO, please check out our careers page at AEMO.com.au for more information.

RaceTrac Company Overview

Job Description:

The Engineering Project Analyst is responsible for providing administrative support to engineering initiatives in a designated market. This individual directly assists Project Managers throughout the various stages of a project lifecycle and assists the Senior Project Manager with market-wide initiatives. Up to 60% travel required.  

Responsibilities:

• Coordinates with Real Estate Manager to prepare complete real estate turnover (T.O.) package for Engineering Project Manager prior to T.O.
• Manages the assembly, communication, and review of Requests for Proposals to prospective consultants.
• Processes and tracks all invoices, check requests, bond requests, construction and legal review requests.
• Carries out day-to-day project management duties to support the overall project lifecycle including, but not limited to: meeting coordination, file requests, project schedule development & updates, and design plans orders.    
• Assembles project T.O. files for review and approval by the Project Manager prior to distribution.
• Assembles all information required for internal project reviews.
• Conducts research on regional design codes and parameters and provides the appropriate recommendations as requested.
• Reviews civil plans for company compliance and quality assurance to minimize any errors prior to final review.
• Oversees the logistics for public hearings such as reserving the necessary resources, organizing the overall event, obtaining and reviewing all agendas and staff reports and preparing presentation documents as requested. 
• Tracks project schedules against critical deadlines.
• Assists all Project Managers, Lead Project Managers, and Senior Project Managers with departmental initiatives as needed.

Qualifications:

• 1+ years experience in Construction, Engineering, or Project Management or related field preferred
• Experience with MS Office Suite preferred
• Experience using AutoCAD a plus
• Experience using project management applications a plus
• Strong communication skills required

Who are we?

We are the University of Cambridge presence in Singapore called Cambridge CARES, sponsored by the NRF CREATE program CAM.CREATE. CARES also hosts industry-funded and other agency-funded projects. Our team is comprised of world-class scientists and engineers working in a vibrant, fast-paced environment with great opportunities for knowledge and skills development.

CARES is a partner in the AMPLE project (An Accelerated Manufacturing Platform for Engineered Nanomaterials), aiming to build a state-of-the-art pilot facility for rapidly scaling-up nanomaterial production, building upon recent innovations at CARES in the areas of reactor design, machine learning and automation. This two-year project will begin in 2022 (Est April) and will lead to commercialization through CARES’ spinoff company - Accelerated Materials Ltd.

Who are we looking for?

We are seeking a highly skilled and experienced Chemical Process Technician to join our team. The ideal candidate will be responsible for monitoring and controlling chemical processes in a manufacturing environment to ensure safe and efficient operations. The Chemical Process Technician will also be responsible for maintaining accurate records and troubleshooting any issues that arise during the process. This will be a fixed-term contract that ends on 30 November 2024 with the possibility of extending to a longer-term position.

Key Responsibilities:

• Monitor and control chemical processes to ensure safe and efficient operations
• Maintain and troubleshoot equipment used in chemical processes, including pumps, valves, and tanks
• Maintain accurate records of all process-related data, including batch records and equipment logs
• Respond to alarms and other process-related issues on time
• Work with product team to ensure that products are manufactured to meet customer requirements
• Adhere to all safety procedures and guidelines

Qualifications:

• Specialist’s diploma or bachelor's degree in Chemical Engineering or related field preferred
• Familiarity with process control systems and software
• Knowledge of chemical safety procedures and guidelines
• Strong analytical and problem-solving skills
• Excellent communication and interpersonal skills
• Ability to work independently and as part of a team
• Ability to work in a fast-paced environment and manage multiple tasks simultaneously

What can we offer you?

• A stimulating working environment with friendly, highly motivated colleagues.
• Opportunities to develop and implement new ideas in a creative environment.
• A competitive salary in line with your skills and experience.
• A comprehensive medical insurance coverage as part of your employment.

Please note this post is mainly based in the CREATE Tower at NUS University Town, Singapore.

How to apply?

Please apply by uploading your CV and academic transcript to https://talent.sage.hr/jobs/aca98562-8f29-47a1-85e6-64df336fdca2. If you have any questions, please feel free to reach out to the HR team at recruitment@cares.cam.ac.uk.

ABOUT GOLDMAN SACHS

The Goldman Sachs Group, Inc. is a leading global investment banking, securities and investment management firm that provides a wide range of financial services to a substantial and diversified client base that includes corporations, financial institutions, governments and individuals. Founded in 1869, the firm is headquartered in New York and maintains offices in all major financial centers around the world.

ABOUT ENGINEERING

Our Engineers don’t just make things – we make things possible. Change the world by connecting people and capital with ideas. Solve the most challenging and pressing engineering problems for our clients. Join our engineering teams that build massively scalable software and systems, architect low latency infrastructure solutions, proactively guard against cyber threats, and leverage machine learning alongside financial engineering to continuously turn data into action. Create new businesses, transform finance, and explore a world of opportunity at the speed of markets.

ROLES

Software Engineering

Transform our business and work across all areas of the firm to design and implement high-quality, scalable and smart solutions. Leveraging both internal and open source services, we design and develop applications capable of building, maintaining, and processing large & complex data sets. Ensuring we have the most up-to-date and actionable information, we constantly strive to boost performance and exceed industry standards in order to meet our clients’ evolving needs. We look for ways to improve our operations and enhance our client offerings through internal and external platforms as we build and expand the capacity for data mining, anomaly detection, and business intelligence.

System Engineering

Systems engineers work in the wide core of systems necessary to support and maintain business operations throughout the firm. As a systems engineer, you have the immediate opportunity to design, develop, implement and own a variety of systems which ensure uninterrupted operation of all our lines of business.

In this role you will explore public and private cloud, networks, storage, compute, big data, application messaging and more. Our engineers work on a variety of challenging problems from building our data infrastructure, to implementing public and private cloud-based solutions, to providing seamless, on-demand scaling of our applications.

Join our systems engineers and write enterprise level code in a variety of programming languages with high-scalability, testing and robustness.

BASIC QUALIFICATIONS

· Graduating from August 2023 to July 2024* with a Bachelor or Master Degree

· Preferred degree in Computer Science, Technology, Math, Statistics and/or Engineering

· No full time work experience (excluding internship experience)

· Interest and passionate in working in financial industry and technology

· Ability to work in a dynamic global environment with a focus on teamwork

· Impeccable attention to detail and excellent problem solving and analytical skills

· Ability to grasp complex issues, interpret information and communicate commercial and operational issues

· Display creativity and entrepreneurial spirit

· Flexibility to adapt to a dynamic and changing organization

· A proactive approach and a high level of enthusiasm

· Proficient with suite of Microsoft Office software and other computer skills

· Preferred technical skills in JavaTM technology, C, C++, UNIX®, Microsoft® technology, Perl, XML, HTML, Visual Basic, VBScript and N-tier architecture, among others.

*This is a future opportunity in our 2024 campus analyst program

We ask all interested candidates to also submit an application through our global recruiting portal which can be found at goldmansachs.com/careers.

Goldman Sachs is an equal opportunity employer. © The Goldman Sachs Group, Inc., 2021. All rights reserved.