Total 75,770 Software Engineer job vacancies in The United States of America

Mob Date: 18/04/2024

Demob date: 09/05/2024

Duration: 3 weeks

Location: PFLNG2

Mob From: Kota Kinabalu

Responsibilities:

• Set up WirelessHART communication for multiple instruments using AMS TREX.

• Connect wireless UT sensors to the caliperay and repeaters and configure them for data transmission.

• Ensure antenna is installed with the optimal signal reception.
• Establish cable connections between antennas and the Emerson Gateway.
• Integrate the Gateway with the WirelessHART network.
• Together with the execution team for the installation and troubleshooting
• Ensuring compliance with specifications, codes or requirements by directing or coordinating installation, manufacturing, construction, maintenance, documentation, support, or testing activities.
• Ensuring all activities necessary to guarantee the design of a 'safe' plant are performed.
• To assist in troubleshooting electrical equipment failures and recommend solutions to avoid recurring issues.
• Submission UAUC Report. ( 1 UAUC per day)

CRITERIA

• Local Sabahan / Valid Sabah work permit
• OGSP
• Medical Offshore
• Bosiet
• CIDB
• Full dose of vaccination c/w booster
• WAH
• Related Certificates

Perks & Benefits

• Employee equity
• Casual dress code
• Open culture
• Personal development opportunities

Location : Johor, Kuala Lumpur and Penang Candidates Wanted 

Job Requirements

• Candidate must possess at least Diploma/Advanced/Higher/ Graduate Diploma in Engineering (Mechanical) or equivalent.
• At least 1 Year(s) of working experience in the related field is required for this position.
• Willing to learn.
• Requires relevant semiconductor / mechanical / pcb industry experience
• Required language(s) : Chinese, English, Bahasa Malaysia.
• Preferable Chinese Speaking candidates.
• Fresh graduate are welcome to apply.
• Ambitious, Self-Motivated, Team Work and Independent.
• Coordinate and work with colleagues to meet and achieve target.
• Possess own transport and willing to travel.
• Able to start work immediately.
• Can work with minimum supervision.
• Have knowledge in machinery is an added advantage.
• Position available in Johor, Penang, Kuala Lumpur.
• Flexibility and willingness to travel frequently to assigned locations, including Kuala Lumpur, Penang, Singapore, and Indonesia.

Job Responsibility

• Provide on-site technical support to customers in various locations, including Kuala Lumpur, Penang, Singapore, Indonesia, and other assigned areas.
• Conduct technical training for the machines we sell to enhance understanding of product features and performance.
• Respond to service requests promptly, troubleshoot machine issues, and deliver effective solutions.
• Collaborate with the sales team, offering technical support to ensure customer satisfaction with our products.
• Maintain close communication with customers, building positive working relationships to foster customer loyalty.
• Attend to sales enquiry & achieve sales target.
• Gather and record customer feedback, providing product improvement suggestions to the research and development team.
• Participate in the development of maintenance plans to ensure optimal performance of equipment.
• Contribute to the expansion of our customer base by actively participating in efforts to acquire new clients.
• Complete reports assigned by the headquarters, including but not limited to detailed records on technical support, customer feedback, and sales trends.
• Provide quotations to customers and recommend suitable equipment based on their needs.
• Prepare and deliver technical proposals explaining products & services to customers.
• Purchase of spare parts or equipment.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel stipends, transportation, etc.)
• Central location
• Casual dress code
• Company trips
• Work visa sponsorship
• Personal leave

Requirements : 

• Bachelor's degree in engineering or related field.
• Valid engineering license - CIDB or NIOSH.
• 2 years field and project planning experience.
• Proficiency in design and visualization software and excellent computer literacy.
• Ability to work with multiple discipline projects.
• Strong project management and leadership skills.
• Strong written and verbal communication skills.
• Knowledge of applicable codes, policies, standards, and best practises.
• Must posses own transport and be willing to travel. 

Job Responsibilities : 

• Prepare, schedule, coordinate, and monitor assigned engineering projects.
• Assign responsibilities and formulate project paramaters to the project team.
• Interact with clients to interpret their needs and requirements and represent them in the field .
• Perform quality control tasks and report on project status.
• Cooperate and communicate with project participants to maintain profitability and efficiency.
• Develope equipment specifications.
• Ensure compliance with applicable codes, practises, policies, standards, and specifications.
• Generate Gantt Chart, S-Curve, and Project Pipeline Schedule.

Perks & Benefits

• Employee equity
• Commission and bonus
• Allowance (travel, sports, transportation, etc.)
• Company trips
• Medical insurance
• Personal development opportunities

ROLES AND RESPONSIBILITIES

• Develops project objectives by reviewing project proposals and plans; conferring with management. 
• Determines project responsibilities by identifying project phases and elements; 
  assigning personnel to phases and elements; reviewing bids from contractors. 
• Determines project specifications by studying product design, customer 
  requirements, and performance standards; completing technical studies; preparing cost estimates. 
• Confirms product performance by designing and conducting tests. 
• Determines project schedule by studying project plan and specifications; calculating time requirements; sequencing project elements. 
• Maintains project schedule by monitoring project progress; coordinating activities; resolving problems. 
• Controls project plan by reviewing design, specifications, and plan and schedule 
  changes; recommending actions. 
• Controls project costs by approving expenditures; administering contractor contracts. 
• Prepares project status reports by collecting, analyzing, and summarizing information and trends; recommending actions. 
• Maintains safe and clean working environment by enforcing procedures, rules, and regulations. 
• Maintains project data base by writing computer programs; entering and backing up data. 
• Maintains product and company reputation by complying with federal and state 
  regulations. 
• Contributes to team effort by accomplishing related results as needed.

JOB REQUIREMENT 

• Requirements Analysis
• Design Skills
• Project Management
• Manufacturing Methods and Procedures
• Process Improvement
• Technical Understanding
• Documentation Skills
• Safety Management
• Supervision,
• Knowledge of CAD, CAD/CAM Circuit Design

Responsibilities:

• Prepare, schedule, coordinate and monitor the assigned engineering projects.
• Monitor compliance to applicable codes, practices, QA/QC policies, performance standards and specifications.
• Interact daily with the clients to interpret their needs and requirements and represent them in the field.
• Perform overall quality control of the work (budget, schedule, plans, personnel's performance) and report regularly on project status.
• Assign responsibilities and mentor project team.
• Cooperate and communicate effectively with project manager and other project participants to provide assistance and technical support.
• Review engineering deliverables and initiate appropriate corrective actions.

Requirements

• Posses at least a Degree in Engineering or equivalent
• Have relevant working experience in shipbuilding industry is an
  advantage
• Knowledge in AutoCAD and Microsoft Project skill is an advantage 
• Qualified Entry Supervisor / AESP / Authorized Gas Tester is an advantage 
• Good time management and organization skills.

Responsibilities:

• To assist the Project Manager to monitor and supervise the construction works at the project site, to ensure it meets the requirements in term of cost, quality and time.
• To review construction drawings and carry out valued engineering.
• To co-ordinate with Authorities, Consultants and Sub-contractors.
• To prepare daily site reports and correspondence.
• To do site inspection to check on quality of works/progress of works/ defect inspection.
• To attend project site meeting to ensure project schedule is adhered to, problem and defects are attended to.

Requirements :

• Candidates must possess Degree/ Diploma in Building or Civil Engineering.
• Minimum 1-2 year working experience.
• Able to plan and lead sub-contractors on day-to day operation.
• Strong communication skills.
• Must be a team player, able to work hard and independently.

Perks & Benefits

• Commission and bonus
• Casual dress code

Job Highlights

We provide a growing platform in terms of Site Experience,

Grow Technical Improvement Guides & Skill Enhancement Training

Less Hierarchy Level, Less Office Politic

We are hiring for multiple work locations, do apply for further discussion. 

Job Description:

• Prepare Schedule for the flawless execution of assigned projects.
• Keeping the project on schedule, on budget and within the specifications.
• Develop costing for assigned tender with resourceful idea or proposal.
• Liase with supplier/ vendor/ contractors with acknowledgement of direct superior
• Ensure the material to be onsite as per target date
• Site coordination among consultant, client, supplier, vendor and contractor
• Communicate with client/ owner/ end use effectively with proper understanding by interpret their needs and requirement.
• Plan, coordinate and compile engineering design work with client/ designer/ consultant/ contractor
• Engineering drawing preparation
• Prepare site progress report as per project requirement.
• Prepare Method of Statement for the construction work
• Plan and arrange for testing and commissioning of the project to meet specification and requirement.
• Ensure all aspects of the project proceed while adhering to internal company SOPs as well as external regulations and laws
• Prepare handover documents once the project completion.

Job Requirements:

• Posses Degree certification in Electrical / Mechanical or Civil Engineering or equivalent
• Preferrable with 1-2 years of construction line working experience
• Have experience in project sites 
• Able to work with minimum supervision

Perks & Benefits:

• Allowance (travel stipends, transportation, etc.)
• Medical insurance
• Personal development opportunities

Job responsibilities:
1. Responsible for game projects infrastructure works, and responsible for the maintenance, update and upgrade of servers and related clients.
2. Responsible for the monitoring of the production environment health and prepare server risk and disaster prevention related work
3. Responsible for maintaining production's security and stability, and well prepare in data backup and recovery.
4. Responsible for cooperating with the development team to setup & maintain various development environments and troubleshoot related problems when needed
5. Responsible for server maintenance script writing, data migration, log analysis. 
6. Cooperate with developer to develop automated infrastructure relate operation work.

Job requirements:
1. Fluent in Mandarin (in order to liaise with Mandarin speaking associates)
2. A bachelor’s degree or higher and at least 3 years of relevant work experience.
3. Strong professional principles, a sense of responsibility, team spirit, and excellent communication skills.
4. Proficiency in using and maintaining mainstream Linux operating systems.
5. Familiarity with public cloud platforms such as Alibaba Cloud and AWS. 
6. Proficiency in using open-source DevOps tools such as Jenkins and SVN.
7. Experience in flexible deployment and configuration optimization of technologies commonly used by internet companies, including but not limited to ELK, Redis, Kafka, MySQL, Docker, Zabbix, Kafka, RabbitMQ, Prometheus, and other technical applications. 
8. Familiarity with Linux/Unix, the ability to write Shell/Python and other scripts, and experience in related server configuration and maintenance.
9. A clear plan for operation and maintenance monitoring, including setting alarm insurance levels, monitoring methods, alarm strategies, etc.
10. Proficiency in using scripting programming languages such as shell/PHP, with experience in automated infrastructure maintenance work preferred. 
11. Open to local Malaysians only.
12. Work onsite (Monday - Friday)

**Short notice candidates is prefer.

Benefits:
13th month's salary
Bonus + increments + promotion
Public Holidays Entitlement (follow all gazette for Federal Territory of Kuala Lumpur)
Annual Leave 14 days
Medical claim
Others benefit

Job Responsibilities

• Understand the specific detailed information regarding hardware and software selection related to network and security such as switches, routers, SD Wan, Network Monitoring Systems (NMS), access points, firewalls, cyber security, Internet Access Management (IAM) and Web Application firewalls (WAF).
• Communicate with clients to perform system administration, installation, commissioning, troubleshooting, maintenance and field support for client platform-related problems.
• Provides guidance and expertise in the planning, design, and implementation of customer IT infrastructure for the most efficient solution to meet business needs development, including present and future capacity requirements.
• Provide specifications and detailed design drawings for the network architecture diagram.
• Respond to incidents, investigate and provide resolutions of incidents escalated via email, inbound call or onsite based on agreed service level.
• Learn and adapt to new technologies, products and platforms such as H3C, Cisco, Fortigate, Palo Alto, Aruba and Sangfor.
• Configure Access Switch, Access Point, IPTV and Fortinet firewall, and IPSEC VPN.
• Install access switch migration to stack switch and perform network preventive maintenance.
• Collaborate with the pre-sales team to perform demonstration as proof of concept for the related network products to clients.
• Fiber optics configuration and troubleshooting such as R&M, Commscope, Schneider, Avaya.

Job Requirements

• Possess a CISCO certificate such as CCNA or CCNP.
• Strong knowledge in the installation, setup, troubleshooting and RMA for Cisco, Aruba, Palo Alto, Fortigate, Sophos solutions including switches, routers, firewall, IP Phones, etc.
• Good attitude and communication skills.
• Minimum 1-2 years working experience.
• Candidate must possess at least a Diploma/Advanced/ Graduate Diploma, Bachelor's Degree/Post Graduate Diploma in Engineering (Computer/Telecommunication), Computer Science/Information Technology or equivalent.

Perks & Benefits

• Annual bonus
• Flexible benefits up to RM1500 per year 
• Profit sharing on half-yearly basis
• Travel Allowance
• Company trip
• Professional development and growth opportunities
• Fitness membership
• Casual dress code

Responsibilities: 

• Able to work beyond normal working hours when necessary.
• Implement effective maintenance procedures to minimize production down time caused by breakdown of machineries. 
• Troubleshoot and diagnose problems and develop and execute maintenance plans to minimise downtime and disruptions. 
• Analyse data to identify trends, diagnose problems and develop solutions to improve equipment reliability and performance. 
• Implement effective preventive maintenance plan to ensure all facilities and equipment operate efficiently and effectively. 
• Initiate necessary modification and improvement to enhance machine efficiency. 
• Conduct studies and carry out analysis to ensure capacity of mechanical installations meet the needs of production. 
• Initiate immediate actions to recommend for improvement and upgrading when and where necessary. 
• Ensure all work requests are sufficiently and promptly fulfilled. 
• Assist in developing system and procedures to continuously enhance energy efficiency. 
• Conduct constant review on spare parts consumption and initiate necessary purchase of spare parts. 
• Analyse spare parts consumption and maintenance cost and initiate effective actions to reduce consumption and maintenance cost. 
• Monitor to ensure operation of utility supply and facilities comply with provision of relevant laws, by-laws, rules and regulations. 
• Plan constantly for proper upkeep and maintenance of building facilities. 
• Ensure continuous development and upgrading of subordinates’ skills. 
• Involve actively in cost savings or improvement projects. 
• To advise and guide maintenance supervisor in the implementation of effective 
  maintenance programs. 
• Provide proper guidance to subordinates to troubleshoot and overcome machine problems speedily and effectively. 
• To prepare monthly reports, capital expenditures and evaluate service providers.

Qualifications: 

• Minimum 3 years of relevant work experience in same field mechanical, electrical or industrial maintenance 
• Strong understanding of engineering principles and knowledge of equipment and machinery 
• Ability to analyse information, diagnose problems and develop solutions 
• Excellent communication and interpersonal skills 
• Strong time management and organisational skills 
• Ability to prioritise tasks and make decisions under pressure 
• Language required : English,Bahasa Malaysia, chinese 
• Minimum education level : certification level 

ROLE AND RESPONSIBILITIES

• Technically advise suitable products, service or equipment for Client. 
• Secure and Renew Orders and Coordinate for the delivery. 
• Meeting with Clients onsite to propose irrigation solution for the site. 
• To Coordinate with Marketing team to produce the necessary sales kits (i.e. technical presentation, sales brochure, advertisement and etc.) 
• Assists with research and development of new product and services 
• Prepare detail bill of material and quotation for all enquiry, including surveying with drone & producing contour map for potential customer. 
• Provide preliminary design conceptual drawing for presentation and quotation. 
• In charge for the operation of e-commerce 
• In charge for providing tutorial or training program for Client (i.e. Landscape Architect, M&E Consultant,Developers and etc.) 

JOB REQUIREMENTS 

• Minimum SPM/ Professional Certificate/ Diploma/ Degree or equivalent in related field. 
• At least 3 year(s) of working experience in related field is required for this position.
• Ability to converse fluently in Mandarin & English
• Excellent in Microsoft Office (Excel, Word, Power Point) 
• Excellent in AutoCAD 2D 

Purpose of Roles

Wrightbus is a fast-moving company which has experienced considerable growth in the last year. As part of this continued growth we are looking for an experienced Electrical Engineer to join our Electrical Engineering Design team. The successful candidate will have responsibility to support the further development of our Electrical Engineering Design, specifically planning and integration of the electrical control for bus body and chassis electrical systems with respect to hardware components, harnesses and panels.

JOB DESCRIPTION

• Support the NPD Strategy for EV, FCEV and HEV electrical control systems.
• Support the development of electric powertrain charging systems.
• Participate in the vehicle life cycle development through concept to engineering design, prototype build, certification, to Job 1
• Work effectively within a cross-functional team on the overall vehicle development
  Elicit external and internal stakeholder requirements for new product developments.
• Selection of electrical components and systems into new and existing vehicle designs ensuring products used meet required standards.
• Design and specification of electrical hardware components for the integration of vehicle subsystems, e.g. fuseboards, switchboxes.
• Liaise with suppliers and manage the progress to meet timing, specification, and engineering requirements
• Undertake the technical assessment and analysis of components and systems and develop optimal solutions to meet overall vehicle requirements.
• Design, and develop CAN communications systems and architecture.
• Design of low and high voltage control for bus body and chassis electrical systems,including wiring harnesses and electrical panels.
• Document, validate and provide FMEA for design reviews and NPD gateways.
• Creation of technical documentation with respect to the vehicle electrical system and installation eg. Wiring schematics, system schedules, harness drawings, electrical engineering standards and procedures.
• Provide and co-ordinate vehicle test plans and commissioning, testing and data logging of vehicle control systems.
• Provide Technical assistance to production, support engineers and the customer.
• Continued development of electrical system to improve ease of installation and to reduce the cost of manufacture.
• Co-ordinate with assembly and manufacturing teams to ensure that the assembly of the electrical system is correctly defined and implemented.
• Provide system technical information and documentation for both internal and external customers.
  
  

General Duties

• Undertake all duties in line with General Data Protection and maintain utmost level of confidentiality.
• Ensure work is completed to meet the requirements of the ISO 9001 standard.
• Ensure that you treat those with whom they come into contact in a courteous and respectful manner in accordance with the Dignity at Work Procedure.
• Wrightbus is committed to equality of opportunity and to selection based on merit. You are required to adhere to and promote the Equal Opportunities Policy throughout the course of your employment.
• You must maintain high standards of personal accountability.
• You must follow the training received when using any work items Wrightbus has provided.
• You must co-operate with others on health and safety and not interfere with, or misuse, anything provided for their health, safety, or welfare.
• You must take care of your own health and safety and that of people who may be affected by what you do (or do not do).
• Staying away from home on occasions will be necessary to meet the requirements of the roles
• Undertake any other duties or training conducive with efficient conduct of the post.

Note

This job description will be subject to review in the light of changing circumstances and may include other duties and responsibilities, as may be determined in consultation with the jobholder. It is not intended to be rigid and inflexible but should be regarded as providing guidelines within which the individual works.
Wrightbus is committed to equality of opportunity and to selection on merit.

Perks & Benefits

• Medical insurance
• Personal leave
• Personal development opportunities

Job Responsibilities :

• Ensuring that all material used and work performed are as per specifications.
• Liaising with any consultants, subcontractors, supervisors, planners, quantity surveyors and the general workplace involved in the project.
• Liaising with the local authority (where appropriate to the project) to ensure compliance with local construction regulations and by-laws.
• Liaising with clients and their representative (architects, engineers and surveyors) including attending regular meetings to keep them informed of progress.
• Day-to-day management of the site, including supervising and monitoring the site labour force and the work of any subcontractors.
• Resolving any unexpected technical difficulties and other problems that may arise.

Job Requirements :

• Candidate must possess at least Bachelor’s Degree/Post Graduate
• Diploma/Professional Degree in Engineering (Civil) or equivalent.
• Required language (s) : Bahasa Malaysia, English.
• At least 1-2 Year (s) of working experience in the related field is required for this position. 
• Required skill(s) : Autocad, Microsoft Office.
• Preferably Senior Executive specialized in Engineering -
• Civil/Construction,Structural.
• Fresh Graduates are encourage.

Perks & Benefits

• Open culture
• Annual Leaves
• Medical Leaves
• Medical / P.A Insurance
   

Job Description

Security Engineer's role is to support the product team in performing product/solution installation, testing, documentation, and support.

Responsibility:

• Provide technical consulting, implementation, support and service delivery to our customers on Identity Access Management (IAM) and Single Sign-On (SSO) solutions.
• Perform system installation, implementation & upgrade services of IAM/SSO solutions.
• Involve in full cycle of project implementation activities - business requirement information gathering, prepare & finalize solution design, solution implementation & development, SIT/UAT, prepare system documentation & production cutover and system go live.
• Involve in post-implementation production support/ad hoc to ensure all the problems/issue solved within the target SLA.
• Monitor and analyze project risk and provide status update report to customer.
• Support pre-sales consulting activities; eg: product presentation, demo and POC.
• Conduct technical training to customers on IAM/SSO solution. 
   

Required Skills

• Candidate must possess at least a Diploma, Advanced/Higher/Graduate Diploma, Bachelor's Degree, Post Graduate Diploma or Professional Degree in Engineering (Electrical/Electronic), Computer Science/Information Technology, Science & Technology or equivalent.
• 1 to 3 years of experience in managing the development, implementation, practice and maintenance of IAM/SSO solutions.
• Hands-on experience with knowledge IAM/SSO solutions tools and platforms.
• Excellent written and communication skills.
• Excellent analytical and problem-solving skills.

Additional Notes

• Understanding of IT infrastructure components, including servers, networks, databases, and other relevant technologies.
• Knowledge of scripting languages (e.g., Bash, PowerShell, Python) and automation tools.

Perks & Benefits

• Allowance (travel stipends, transportation, etc.)
• Central location
• Flexible working hours
• Casual dress code
• Medical insurance
• Personal leave
• Open culture
• Personal development opportunities

We are an established manufacturer of plastic products. In line with our continued expansion, we are looking for a suitable candidate to fill the following position:

Mechanical Engineer

Responsibilities

• Provide Technical Support for Sales Team and Production in the Company.

Requirements

• Possess a Diploma/Bachelor’s Degree in Mechanical Engineering/Electromechanical engineering
• With experience would be preferable
• Proficient in using AutoCAD
• Proficient in using MS Office
• Able to communicate in Chinese language would be an added advantage
  Based in Ipoh, Perak
• Possess own transportation
   

We offer an attractive remuneration package and opportunities for personal development and growth. Interested candidates are invited to apply for this job and send us a comprehensive CV or Resume!

Perks & Benefits

• Medical insurance
• Personal leave
• Personal development opportunities